NW Marketplace v1.0 (CLOSED)

[XanRules]

Originally Posted by Rio

Why didn't you like it?

Word, that's a solid piece.

[evan]

Some items for sale:


- ROTA RT5 wheels (4) flat black - Staggered, 18x8.5/18x9.5 +44mm, 3 wheels are in excellent shape, 1 wheel was curbed and requires repair. $700 OBO


- WORKS 2.5" resonated mid-pipe (never driven on, but put through a dyno session). Nearly new. $250 OBO (perfect for someone with an aftermarket axleback or stock exhaust)


- OEM driveshaft - $150 OBO


- CUSTOM 2.5" 304SS cat-back exhaust - This was built by PRE racing. It comes with the Crawford axleback tips. In fact, it started life as the Crawford axleback and then was converted into a full 2.5" catback. It has 2 resonators out in the axleback section and 1 resonator in the mid-pipe section. This is very aggressive sounding, especially with a header. Excellent condition. $500 OBO

[503 BRZ]

Originally Posted by evan

Some items for sale:


- ROTA RT5 wheels (4) flat black - Staggered, 18x8.5/18x9.5 +44mm, 3 wheels are in excellent shape, 1 wheel was curbed and requires repair. $700 OBO


- WORKS 2.5" resonated mid-pipe (never driven on, but put through a dyno session). Nearly new. $250 OBO (perfect for someone with an aftermarket axleback or stock exhaust)


- OEM driveshaft - $150 OBO


- CUSTOM 2.5" 304SS cat-back exhaust - This was built by PRE racing. It comes with the Crawford axleback tips. In fact, it started life as the Crawford axleback and then was converted into a full 2.5" catback. It has 2 resonators out in the axleback section and 1 resonator in the mid-pipe section. This is very aggressive sounding, especially with a header. Excellent condition. $500 OBO

Any sound clip on the catback?

[evan]

Originally Posted by The Natural

Any sound clip on the catback?

I do not have one, unfortunately. I would be willing to have you mount it up on your own car and try it out. It is sitting at PRE.

[Yamaha_R6]

SOLD

Selling my 03 Yamaha R6 for $3500 or best offer, clean title in hand. Has Michelin Pilot Road 3 rear and front tires, carbon fiber Puig windscreen, CRG shorty levers, flush mount front and rear turn signals, and chrome frame sliders. I will also throw in a Scorpion EXO-500 Skull helmet (L), a pair of Alpinestars gloves, Yamaha sweatshirt, motorcycle cover, and OEM levers in case you don't like the shorties. Tires have less than 1k miles on them. About 21k on the odometer. Minor scratches and a couple cracks on the right hand side fairing due to laying it down at very low speed (slipped on a patch of ice making a right hand turn from a dead stop few months back). PM if you are interested, thanks for looking.

[stockysnail]

Does the Works 2.5" resonated mid-pipe fit in the stock locations? You mentioned '...or stock exhaust' so I assume yes. Perhaps I could throw it on to see if I like it then if I do pay you?

Originally Posted by evan

Some items for sale:


- ROTA RT5 wheels (4) flat black - Staggered, 18x8.5/18x9.5 +44mm, 3 wheels are in excellent shape, 1 wheel was curbed and requires repair. $700 OBO


- WORKS 2.5" resonated mid-pipe (never driven on, but put through a dyno session). Nearly new. $250 OBO (perfect for someone with an aftermarket axleback or stock exhaust)


- OEM driveshaft - $150 OBO


- CUSTOM 2.5" 304SS cat-back exhaust - This was built by PRE racing. It comes with the Crawford axleback tips. In fact, it started life as the Crawford axleback and then was converted into a full 2.5" catback. It has 2 resonators out in the axleback section and 1 resonator in the mid-pipe section. This is very aggressive sounding, especially with a header. Excellent condition. $500 OBO

[evan]

Originally Posted by stockysnail

Does the Works 2.5" resonated mid-pipe fit in the stock locations? You mentioned '...or stock exhaust' so I assume yes. Perhaps I could throw it on to see if I like it then if I do pay you?

Sure. I'm ok with that. Yes, it fits the stock or any aftermarket axleback since it does not alter the stock pipe inlet/outlet locations.

[bchavs]

@evan do you have any pics of the rims? I might be interested.

[BIL90]

For sale:

Set of OEM mud guards. the previous owner had them on when I bought the car. I wanted a cleaner look so I had them taken off today. These retail for about $110, I'll let them go for $50.


Sent from my iPhone using Tapatalk

[evan]

Originally Posted by bchavs

@evan do you have any pics of the rims? I might be interested.

Yes, I will take some tonight or tomorrow and post up.

[torqdork]

Originally Posted by torqdork

FS:

Carbotech XP10 Fr/XP8 Rr, the exact setup recommended by Carbotech specifically for FR-S/BRZ track days. Perfect fit in stock calipers, no shims needed.

Used three track days only, never on street. Tremendous initial bite, easy to modulate, never once faded at Portland Int'l. Raceway when used with ATE Super Blue brake fluid. No unusual wear noted on rotors, just some dust easily removed with car wash and a brush.

Going BBK and won't need them. Paid ~$350 last year, sell for $240.

Will consider shipping USPS Priority Mail for $20.

PayPal Verified, USPS money order, cashier's check or of course COD.

http://www.ctbrakes.com/brake-compounds2.asp

http://www.ctbrakes.com/pads.asp?Make=Scion

Still available, offering Spring Brake (har) special of $240 shipped to lower 48 and PayPal confirmed and verified.

I'm traveling until next week, will respond then.

[Jmonty]

Originally Posted by BIL90

For sale:

Set of OEM mud guards. the previous owner had them on when I bought the car. I wanted a cleaner look so I had them taken off today. These retail for about $110, I'll let them go for $50.


Sent from my iPhone using Tapatalk

I may want to take a look at them,

[BIL90]

Originally Posted by Jmonty

I may want to take a look at them,

Do u want to set up a time and place to meet?


Sent from my iPhone using Tapatalk

[Jmonty]

Originally Posted by BIL90

Do u want to set up a time and place to meet?


Sent from my iPhone using Tapatalk

PM me your number, I am in West Salem