Saskatchewan Thread

[JPxM0Dz]

Originally Posted by jhunt88

Hey guys, I'm making the poster for the Scion May Meetup at the dealership, anyone have a picture of their car they want on the poster? I am trying to get a few modded BRZ/FRS loaded on there, but I'd use member cars if possible! Post em up if you want to be on the poster!

Feel free to use any of these

[JPxM0Dz]

[frs baby]

well only thing left for me to do is gauges now

[IIDutch]

Wheels came, need to adjust the rear a bit and drop it a smidge. The wheels are Niche Citrine M155 in Bronze, 19x8.5/9.5 +40 with 225/35r19 and 265/30r19 rubber lowered on Stance coils with Swift Springs and no fender roll. Front is as low as I can go without rolling the fenders, hopefully when I drop the rear more I can get it to fit like the fronts and no rubbing.






Other things I've done this year are a roof spoiler install, debadged and spoiler removed in prep for vinyl wrapped roof and trunk. Painted Toyota badges (front one is black, rear is red with a gloss black trunk garnish surrounding it), full length drift mirror (need to remove the previously zebra duct tape such JDM mod) and a gloss black shark fin antenna. I have window visors but I'm unsure if I want to install them or not

[JPxM0Dz]

^^^Looks Good! Fills in the huge wheel well quite nicely. I'll need to drop mine to get rid of some of the gap

[IIDutch]

Originally Posted by JPxM0Dz

^^^Looks Good! Fills in the huge wheel well quite nicely. I'll need to drop mine to get rid of some of the gap

Thanks! Your wheels are nice too, I almost ended up getting Niche Targa which are almost similar to yours in spoke design, super happy with the wheels I went with though. Once you drop it you'll just fall in love with every mod you've done all over again! Revamps the car completely. What coils did you go with again?

[JPxM0Dz]

Originally Posted by IIDutch

Thanks! Your wheels are nice too, I almost ended up getting Niche Targa which are almost similar to yours in spoke design, super happy with the wheels I went with though. Once you drop it you'll just fall in love with every mod you've done all over again! Revamps the car completely. What coils did you go with again?

I have BNIB Fortune Auto 510's with Swift Springs sitting in box for almost 3 years now. They're going in next month. Figured it was time
Both of these are being installed in May...

[IIDutch]

Originally Posted by JPxM0Dz

I have BNIB Fortune Auto 510's with Swift Springs sitting in box for almost 3 years now. They're going in next month. Figured it was time
Both of these are being installed in May...

Nice! About time hey hahah, had to learn all the moose jaw roads that are okay first right? I only drive my car to and from my parents house now just off the 9th street highway turn off. I'm scared of the other roads. What R LCA's are those? Mine were cheaper ones and didn't fit good at all and couldn't install them

[JPxM0Dz]

Originally Posted by IIDutch

Nice! About time hey hahah, had to learn all the moose jaw roads that are okay first right? I only drive my car to and from my parents house now just off the 9th street highway turn off. I'm scared of the other roads. What R LCA's are those? Mine were cheaper ones and didn't fit good at all and couldn't install them

Yup I drive certain roads and stick to them for the most part. The LCA's are made by Whiteline. I had some SPC ones at first, but decided I wanted to add some bling

[frs baby]

anyone coming out to spring bash at kings park speedway sat may 2

[JPxM0Dz]

^^^Sorry I won't be able to make it

Sent from my SM-N910W8 using Tapatalk

[JPxM0Dz]

@IIDutch I have an 86 badge if your interested for your FRS. It's brand new and comes with 3M backing. It was a freebie from zeta auto, but I don't need it. So your welcome to it if you want it

[SkAsphalt]

New photo coming in, some have seen it already.

[TB]

/thread.