Perth86 HKS-TRD-JDM - Page 54 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AznKirby · 03-18-2015, 01:12 PM

Are you going to run a diffuser with the RB one as well? Or will you leave a big hole at the back?

stevo_12v · 03-18-2015, 03:49 PM

Haha dually 86.
@AznKirby I'm waiting on a DWlabs Type 3 to come out. Their previous diffusers also work with the RB faux Diffuser

AznKirby · 03-18-2015, 05:00 PM

Nice. That's what I'm planning to do as well. I've been scared of tracking my car ever since I put the Rocket Bunny rear bumper valance on. That shit flaps in the wind like crazy

stevo_12v · 04-01-2015, 12:04 AM

Decided two weeks to make up my OWN diffuser from scratch. It's gonna be l33t.

Tye300 · 04-01-2015, 12:09 PM

Awesome build man. Keep it coming! Congrats on breaking the 60sec barrier! I'm planning to wrap my header too, how many dei wraps did it take?

stevo_12v · 04-01-2015, 03:19 PM

Quote:

Originally Posted by Tye300

Awesome build man. Keep it coming! Congrats on breaking the 60sec barrier! I'm planning to wrap my header too, how many dei wraps did it take?

A 50' long roll will be enough. Should have enough spare for the over pipe also.
Wait till you see whats coming next for the car though!!

wootwoot · 04-01-2015, 07:09 PM

Very odd that you only had -1.2 after the coilover install. If you flip the top hats 90 degrees and add OEM crash bolts you should get -2. That's what I got. I'm not sure how much camber you need though....

Tye300 · 04-02-2015, 01:29 AM

Quote:

Originally Posted by stevo_12v

A 50' long roll will be enough. Should have enough spare for the over pipe also.
Wait till you see whats coming next for the car though!!

Thanks bro. Will be watching!

stevo_12v · 04-03-2015, 10:48 AM

Going through the last couple pages of this and realised I forgot to upload an old dyno plot. Anyway, here it is!! BOOM! lol

stevo_12v · 04-17-2015, 07:48 AM

8686 · 04-17-2015, 09:02 AM

Quote:

Originally Posted by stevo_12v

Piece of ART

stevo_12v · 04-26-2015, 08:39 AM

For my fellow RB Diffuser brothers.. /insert Xzibit meme..
All 2mm thick Aluminium
Sorry, I don't have CFD analysis...

Continues from the JDM underbody panels.. and then envelopes the whole LCA, Exhaust bend and diff. Sectional cutout for the diff when using a jackstand to lower/raise the car. There is a cover for it but I was rushed, and didn't bother securing it. In front of the diff will be a vent to direct air for cooling the diff.

Pug_BRZ · 04-26-2015, 09:48 PM

Looks good, I assume that you're going to powder coat in black to reduce the chance of getting defected? You just need the Griffon-style driveshaft cover to make a matching set.

Interested to know how it goes with clearance etc. Keep up the commentary.

stevo_12v · 04-27-2015, 12:25 AM

Quote:

Originally Posted by Pug_BRZ

Looks good, I assume that you're going to powder coat in black to reduce the chance of getting defected? You just need the Griffon-style driveshaft cover to make a matching set.

Not powder coating this one, just a prototype to see final fitment. Maybe the next one. Do you have a pic of this driveshaft cover??
I'll be doing a complete underbody panel set for mine at any rate, have the DXF for it already done up, just needs to be fabbed.

03-18-2015, 01:12 PM	#743
AznKirby Are you 20/20? Join Date: Sep 2013 Drives: Hopes and dreams Location: Montreal, Canada Posts: 1,912 Thanks: 715 Thanked 1,310 Times in 703 Posts Mentioned: 36 Post(s) Tagged: 0 Thread(s)	Are you going to run a diffuser with the RB one as well? Or will you leave a big hole at the back? __________________ 2014 FR-S Monogram 2005 Acura RSX Type-S IG: @MonKehC

03-18-2015, 05:00 PM	#745
AznKirby Are you 20/20? Join Date: Sep 2013 Drives: Hopes and dreams Location: Montreal, Canada Posts: 1,912 Thanks: 715 Thanked 1,310 Times in 703 Posts Mentioned: 36 Post(s) Tagged: 0 Thread(s)	Nice. That's what I'm planning to do as well. I've been scared of tracking my car ever since I put the Rocket Bunny rear bumper valance on. That shit flaps in the wind like crazy __________________ 2014 FR-S Monogram 2005 Acura RSX Type-S IG: @MonKehC

04-01-2015, 12:09 PM	#747
Tye300 Senior Member Join Date: Oct 2012 Drives: Toyota 86 TRD Version AT Location: Manila, Philippines Posts: 883 Thanks: 548 Thanked 599 Times in 283 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	Awesome build man. Keep it coming! Congrats on breaking the 60sec barrier! I'm planning to wrap my header too, how many dei wraps did it take? __________________ Vortech Supercharged Flex Fuel 86 TRD AT Visit my build thread here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dumb idea to get auto tranny?	tinnyms3	BRZ First-Gen (2012+) -- General Topics	85	06-22-2012 05:22 PM
After this last winter is RWD such a bad idea	Nate219BRZ	Great Lakes	3	03-14-2012 05:03 PM
Any Idea of U.S. Pre-Order Numbers?	markemark24	Scion FR-S / Toyota 86 GT86 General Forum	1	02-21-2012 12:29 PM
I have a great idea!	ftw-86	Scion FR-S / Toyota 86 GT86 General Forum	56	07-24-2011 11:14 AM
Marketing Idea for the FT-86	JDMluv	Scion FR-S / Toyota 86 GT86 General Forum	21	05-02-2011 05:29 AM

04-01-2015, 07:09 PM	#749
wootwoot Senior Member Join Date: Jul 2012 Drives: FRS Location: Cali Posts: 1,558 Thanks: 188 Thanked 461 Times in 264 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Very odd that you only had -1.2 after the coilover install. If you flip the top hats 90 degrees and add OEM crash bolts you should get -2. That's what I got. I'm not sure how much camber you need though....

04-26-2015, 09:48 PM	#755
Pug_BRZ Member Join Date: Nov 2014 Drives: WRB Subaru BRZ Location: Australia Posts: 26 Thanks: 9 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Looks good, I assume that you're going to powder coat in black to reduce the chance of getting defected? You just need the Griffon-style driveshaft cover to make a matching set. Interested to know how it goes with clearance etc. Keep up the commentary.

User Name		Remember Me?
Password