FT86SF's Performance Package Brembo Info Thread

[Daedex]

anyone know if the Titan 7 TS5 T-S5 18x9.5 +40 will clear?

[timurrrr]

I've created a new post to build a list of wheels that fit Brembos, and I intend to keep it up to date:
http://www.ft86club.com/forums/showthread.php?t=135328

Please post specs and photos of wheels not on that list that fit PP Brembos on that thread!

[Marcoscrdo]

Originally Posted by spicyricecake

Can anyone here confirm what size spacer is required up front to clear 18x9.5 +40 Enkei Nt03+m on the PP brembos?
I know on the STI it's 8mm, but I was told the sizes are different for the BRZ. I just don't know if our's is smaller or bigger.

Have you found out any info for the 18x9.5 +40 Enkei Nt03+m wheels? Planning to run sti brembos, hoping for the best.

[monsterspeed]

Originally Posted by FremontSubaru

According to Konig, the 17x9 +40 will not fit the pp brembos. this is very unfortunate for STX autocrossers
I loved this option since it was cheap, lightweight, and came in black!

Probably have to go with Wedssports.. anyone know the clearance on the Rota Titans 17x9 +35?

I ran the Hypergram in 17x9 +40 and they fit fine over the Brembo BBK, tons of space. Rather close to the strut, but managed -1.5 camber on bolts with 4.5mm clearance to the strut, used a 235 section width tire.

[FremontSubaru]

Originally Posted by monsterspeed

I ran the Hypergram in 17x9 +40 and they fit fine over the Brembo BBK, tons of space. Rather close to the strut, but managed -1.5 camber on bolts with 4.5mm clearance to the strut, used a 235 section width tire.

Hypergrams will have more brake clearance room than the dekagrams, glad they fit ok!

[monsterspeed]

Originally Posted by FremontSubaru

Hypergrams will have more brake clearance room than the dekagrams, glad they fit ok!

Yes, the Hypergrams have a unique spoke design. Definitely designed with BBK clearance in mind. A regular 17x9 +40 might struggle. Just comes down to the design at that point.

Sent from my Pixel 2 XL using Tapatalk

[spike021]

Since I haven't seen more brake pad options, I wanted to add Endless to the list:

EP 357/291 STI SSS

This size fits the PP Brembo calipers. SSS is interchangeable, depending on which pad you get from Endless' Super-street series (Y, S, M, etc.). This is the same size as for 2004 WRX STI Brembos.

As far as an opinion, I just swapped these in yesterday so I need to break them in and go on some drives before I can comment much.

Only thing I can say is there's no screeching or audible noise so far but I've only had them on for roughly 50 miles, if that.

[Jdmuscle]

Looks like these set the wheels back a bit... does that mean you can go a bit more aggressive on offset to get more of a concave design? For example.. go +32 or something like that for a 18x9.5 wheel to have the same flush appearance that a stock rotor will yield with a +38 offset?