STI Brembo HELP ~ - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Trap63 · 08-01-2013, 05:58 PM

HI, Guys..here in Italy I find some brakes set of Brembo (black, red, silver, Maserati or Alfa Romeo customized) without right brackets for BRZ.
Brembo produces some "universal" (the same) brake set and for each car only the brackets are specific. Brembo here is like the "Agency": top secrets all over and no help and support and brackets aren't sold standalone.
Anyone can help me to find the schema or a fitment template to build them fitting BRZ Hardware?
Here some Brembo set are installed widely on FIAT/ALFA and therefore is more easy to find (and cheaper) but brackets still remain a trouble.
Thanks for support. I try this way...

OrbitalEllipses · 08-01-2013, 06:16 PM

Buy STI brembo brakes...no bracket needed. You'll spend more Euros fabbing a custom bracket and rotor to fit your Alfialamborrari brakes than buying OEM equipment from the US or whatever godforsaken European country actually has spare STI parts.

Ciao bella.

Trap63 · 08-01-2013, 06:25 PM

Quote:

Originally Posted by OrbitalEllipses

Buy STI brembo brakes...no bracket needed. You'll spend more Euros fabbing a custom bracket and rotor to fit your Alfialamborrari brakes than buying OEM equipment from the US or whatever godforsaken European country actually has spare STI parts.

Ciao bella.

..Brembo GT calipers coming from "wholesaler" that dismantle test cars of FGA/Chrysler sells them @250,00 Eur for pair.....and some test cars were only for window dressing or lower mileages than the actual mine....Just done for other cars...

STI brembo brakes are the same of Alfa Romeo Giulietta TB , 4 pistons 34 mm, only brackets change...and paint.

OrbitalEllipses · 08-01-2013, 06:26 PM

That's a freaking deal...

Trap63 · 08-01-2013, 06:29 PM

Quote:

Originally Posted by OrbitalEllipses

That's a freaking deal...

yes... a lot. I have almost 15 pairs.....of those. I know that in UK someone produces bracket kits for old Impreza near swapping to new brake MY 2011, but only for WRX....(rear too).

OrbitalEllipses · 08-01-2013, 06:33 PM

Your best bet is to ask Brembo Italy for the specification documents, I don't see them hosted online on their webpage.

mousekilla15 · 08-01-2013, 08:47 PM

If you figure this out let us know I want sti brembos on mine as well

OrbitalEllipses · 08-01-2013, 08:57 PM

Quote:

Originally Posted by mousekilla15

If you figure this out let us know I want sti brembos on mine as well

STI Brembos from 08 bolt up...he's attempting to use Fiat Brembos.

mousekilla15 · 08-01-2013, 08:59 PM

Ahhhhh missed that part my bad.... Does the 08 front and rear bolt up

Trap63 · 08-02-2013, 03:13 AM

Quote:

Originally Posted by OrbitalEllipses

Your best bet is to ask Brembo Italy for the specification documents, I don't see them hosted online on their webpage.

...I know Brembo sales agent very well as I installed on previous car a Brembo GT..., impossible to have brackets....

ft_sjo · 08-02-2013, 04:18 AM

My used brembos also cost £150, so worth the time. I'm fab'ing custom brackets, and bells so I can use AP racing disks. More race. More!

nzer · 08-02-2013, 04:23 AM

Quote:

Originally Posted by ft_sjo

My used brembos also cost £150, so worth the time. I'm fab'ing custom brackets, and bells so I can use AP racing disks. More race. More!

Off topic, but you still need to remove the last four unicorns on your signature as it means other posts get squished up as yours takes the maximum width, like an oversized picture.

ft_sjo · 08-02-2013, 04:44 AM

Quote:

Originally Posted by nzer

Off topic, but you still need to remove the last four unicorns on your signature as it means other posts get squished up as yours takes the maximum width, like an oversized picture.

Buy a higher resolution monitor

nzer · 08-02-2013, 05:03 AM

Quote:

Originally Posted by ft_sjo

Buy a higher resolution monitor

Tablet mate

08-01-2013, 05:58 PM	#1
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 921 Thanks: 1,163 Thanked 834 Times in 288 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	STI Brembo HELP ~ HI, Guys..here in Italy I find some brakes set of Brembo (black, red, silver, Maserati or Alfa Romeo customized) without right brackets for BRZ. Brembo produces some "universal" (the same) brake set and for each car only the brackets are specific. Brembo here is like the "Agency": top secrets all over and no help and support and brackets aren't sold standalone. Anyone can help me to find the schema or a fitment template to build them fitting BRZ Hardware? Here some Brembo set are installed widely on FIAT/ALFA and therefore is more easy to find (and cheaper) but brackets still remain a trouble. Thanks for support. I try this way... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GRB Brembo caliper on BRZ	RavSpec	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	66	11-15-2016 02:50 PM
Brembo BBKs Announced	oneday	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	83	06-11-2014 10:51 PM
Brembo + STD R9	dompower	Brakes, Suspension, Chassis	17	06-13-2013 07:56 PM
R35 Brembo Brakes - Full set	2013GTRNate	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	8	10-06-2012 10:08 AM

08-01-2013, 06:16 PM	#2
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,889 Times in 2,902 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	Buy STI brembo brakes...no bracket needed. You'll spend more Euros fabbing a custom bracket and rotor to fit your Alfialamborrari brakes than buying OEM equipment from the US or whatever godforsaken European country actually has spare STI parts. Ciao bella.

08-01-2013, 06:26 PM	#4
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,889 Times in 2,902 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	That's a freaking deal...

08-01-2013, 06:33 PM	#6
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,889 Times in 2,902 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	Your best bet is to ask Brembo Italy for the specification documents, I don't see them hosted online on their webpage.

08-01-2013, 08:47 PM	#7
mousekilla15 Senior Member Join Date: Jan 2013 Drives: WRB BRZ-L Location: TACOMA, WA Posts: 242 Thanks: 2 Thanked 81 Times in 51 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	If you figure this out let us know I want sti brembos on mine as well

08-01-2013, 08:59 PM	#9
mousekilla15 Senior Member Join Date: Jan 2013 Drives: WRB BRZ-L Location: TACOMA, WA Posts: 242 Thanks: 2 Thanked 81 Times in 51 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Ahhhhh missed that part my bad.... Does the 08 front and rear bolt up

08-02-2013, 04:18 AM	#11
ft_sjo Banned Join Date: Oct 2012 Drives: GT86 Location: The Motherland Posts: 1,398 Thanks: 140 Thanked 473 Times in 271 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	My used brembos also cost £150, so worth the time. I'm fab'ing custom brackets, and bells so I can use AP racing disks. More race. More!

User Name		Remember Me?
Password