AZP Track Event: NJMP Lightning, June 2

[AZP Installs]

We were all novices at one point in time. There were a lot of folks out there that helped us to get started in this hobby, so this is our way of paying it forward and helping others get into this great hobby.

Our goal is to create a premium track experience especially for novices and advanced drivers. Wait until you go for the track walk with Aaron Povoledo and his classroom sessions. Great stuff.

-mike

[AZP Installs]

Still looking for more Novice Solo, Advanced and Instructors for this event!

-mike

[amram]

Mike, is there any policy for in-car camera mounts at the track? Are windshield suction mounts ok? Am planning to use Harry's Lap Timer on iPhone to capture lap data for later analysis and dash-cam video (with the extremely cool gps/obd data overlay! ) using the iPhone itself. thanks!

Edit - For anyone interested, here's a guy doing NJMP Lightning last year, captured with Harry's Lap timer and an iPhone4 and OBD device....

[ame="https://www.youtube.com/watch?v=c1I4s9r_prQ"]Track Daze - NJMP Lightning 23-24 June 2012 - YouTube[/ame]

[AZP Installs]

Originally Posted by amram

Mike, is there any policy for in-car camera mounts at the track? Are windshield suction mounts ok? Am planning to use Harry's Lap Timer on iPhone to capture lap data for later analysis and dash-cam video (with the extremely cool gps/obd data overlay! ) using the iPhone itself. thanks!

Edit - For anyone interested, here's a guy doing NJMP Lightning last year, captured with Harry's Lap timer and an iPhone4 and OBD device....

Shouldn't be a problem as long as it's secured.

-Mike Paisan


Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

[AZP Installs]

Still a few Novice Solo slots left and plenty of Advance Driver Slots available.

-Mike Paisan


Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

[amram]

About 3 weeks left, really looking fwd to this!

Mike, you guys stock Motul RBF 600 right? I think I'm going to swing by one weekday evening next week and pick some up for the brake fluid flush I plan to do the following weekend. Already got my speed bleeders in the mail this week

[AZP Installs]

Originally Posted by amram

About 3 weeks left, really looking fwd to this!

Mike, you guys stock Motul RBF 600 right? I think I'm going to swing by one weekday evening next week and pick some up for the brake fluid flush I plan to do the following weekend. Already got my speed bleeders in the mail this week

We do not suggest using speed bleeders. Once they start to corrode a bit they become dangerous. Seen a lot of them snap on folks trying to bleed their brakes with them, they also don't work as effectively as billed in terms of a good bleed.



We do have pads and fluid in stock.

-mike

[FRSKEV]

Are you guys doing another track event later on, I won't be able to make it to this one but would love to sign up for the next one

[AZP Installs]

Originally Posted by FRSKEV

Are you guys doing another track event later on, I won't be able to make it to this one but would love to sign up for the next one

We are looking at trying to get one setup for August depending how this one ends up.

-mike

[amram]

Originally Posted by AZP Installs

We do not suggest using speed bleeders. Once they start to corrode a bit they become dangerous. Seen a lot of them snap on folks trying to bleed their brakes with them, they also don't work as effectively as billed in terms of a good bleed.



We do have pads and fluid in stock.

-mike

Great I'll stop by next week!

Mike, thanks for sharing your experience on the speed bleeders, am considering if I should instead use the motive power bleeder or the bleeder bottle with check valve (http://www.turnermotorsport.com/show...e-simple-bleed) since I won't be doing that frequent changes. Just need something to do a one man change and would like to keep it simple and keep reliability high and Maint low. Any suggestions on either of those? Like the idea of the bottle since it's universal and so could use it on my honda odyssey too.

[AZP Installs]

Originally Posted by amram

Great I'll stop by next week!

Mike, thanks for sharing your experience on the speed bleeders, am considering if I should instead use the motive power bleeder or the bleeder bottle with check valve (http://www.turnermotorsport.com/show...e-simple-bleed) since I won't be doing that frequent changes. Just need something to do a one man change and would like to keep it simple and keep reliability high and Maint low. Any suggestions on either of those? Like the idea of the bottle since it's universal and so could use it on my honda odyssey too.

We use the Motive setup in our shop. Love them. We have 2 of them with 2 different kinds of brake fluid in each and over the years they've served us well.

-Mike Paisan


Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

[dp1]

Originally Posted by AZP Installs

We use the Motive setup in our shop. Love them. We have 2 of them with 2 different kinds of brake fluid in each and over the years they've served us well.



-Mike Paisan





Maintaining, Modifying and Educating TriState Enthusiasts since 2001.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Could you please include a link to the Motive bleeder you're using? I have Sprint BBK in the front and stock rear. Thank you

[AZP Installs]

Originally Posted by dp1

Could you please include a link to the Motive bleeder you're using? I have Sprint BBK in the front and stock rear. Thank you

Motive isn't a bleeder, it's a tank that pressurizes the system from your master cylinder. Then you bleed each corner as normal. The only options are which cap to put on which is related to your master cylinder. For our cars it's the Subaru one.

-Mike Paisan


Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

[AZP Installs]

A little teaser?

[ame]http://youtu.be/4fB8JQAiCHE[/ame]

-Mike Paisan


Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"