Sprintex 335 Testing & Progress - Page 13 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AJPG · 03-06-2015, 07:43 AM

Quote:

Originally Posted by moto-mike

It was 30f in anchorage Alaska yesterday. It was -8f here. WTF, I'm moving.

3f!!!! Fvck that's cold.

Pending a retune

Xero-Limit · 03-06-2015, 05:47 PM

It is official! Upgrade kits are ready to ship for 210 folks. This includes the blower, rear elbow with fittings (still plastic), and the pulley. Ships with an 80, 85's are available just like the regular kit (85 extra).

brianhj · 03-06-2015, 05:49 PM

*drools*

Lawnik · 03-06-2015, 06:37 PM

Quote:

Originally Posted by moto-mike

It is official! Upgrade kits are ready to ship for 210 folks. This includes the blower, rear elbow with fittings (still plastic), and the pulley. Ships with an 80, 85's are available just like the regular kit (85 extra).

Nice work moto east. The 210 will make a great desk display piece.

Now the CDN dollar needs to rebound a bit and you and I will be talking.

350matt · 03-07-2015, 09:12 AM

Quote:

Originally Posted by moto-mike

It is official! Upgrade kits are ready to ship for 210 folks. This includes the blower, rear elbow with fittings (still plastic), and the pulley. Ships with an 80, 85's are available just like the regular kit (85 extra).

how much?

Lawnik · 03-07-2015, 12:35 PM

It's on their website

http://www.moto-east.com/store/brz-s...c-335-upg.html

ICantAffordAnLFA · 03-07-2015, 03:38 PM

Built motor Tick
210 installed Tick

What am I waiting for

Chad86 · 03-07-2015, 05:05 PM

Quote:

Originally Posted by Lawnik

Nice work moto east. The 210 will make a great desk display piece.

Now the CDN dollar needs to rebound a bit and you and I will be talking.

That's where I got burned with the CAD dollar down right now. Don't know if I could have done better than the group buy, by purchasing direct out of AU

Calum · 03-07-2015, 07:42 PM

Quote:

Originally Posted by Lawnik

Nice work moto east. The 210 will make a great desk display piece.

Now the CDN dollar needs to rebound a bit and you and I will be talking.

God, I hear that! I tried getting a price for a $200 part yesterday, after taxes, exchange, and brokerage fees that $200 USD becomes $367 CAD, and that's if paypal only takes 1% and fedex only takes $10 for brokerage fees.

This fucking low dollar is driving me nuts.

Jmonty · 03-08-2015, 01:15 AM

is there a group buy for this kit?

Xero-Limit · 03-08-2015, 10:08 AM

Quote:

Originally Posted by Jmonty

is there a group buy for this kit?

Nope, not going to be. That GB was a one off in the dead of winter and isn't happening again.

Quote:

Originally Posted by Calum

God, I hear that! I tried getting a price for a $200 part yesterday, after taxes, exchange, and brokerage fees that $200 USD becomes $367 CAD, and that's if paypal only takes 1% and fedex only takes $10 for brokerage fees.

This fucking low dollar is driving me nuts.

This has actually allowed us to keep the tuning pricing lower and make the group buy happen. In the grand scheme of things the current exchange rate is more inline with the pre-recession ratios so I wouldn't hold you breath waiting for it to come down if the oil prices stay relatively low. Sucks for those outside the US though for sure. Two fold issue for us...lower costs but less international customers. Probably a wash in the end.

Jmonty · 03-08-2015, 12:10 PM

so has there been any more evidence of this kik on a stock motor / stock internals?

Chad86 · 03-08-2015, 02:05 PM

Quote:

Originally Posted by Jmonty

so has there been any more evidence of this kik on a stock motor / stock internals?

@moto-mike in this new video from MRT they are running a pulley larger than 85mm and having to keep the engine revs below 6,000 rpm to limit boost to prevent engine damage, as the engine is not yet built.

With your tune will I not have this problem? Also, will I need to remove the padding from the inside of the hood for clearance?

[ame="https://www.youtube.com/watch?v=rpjf3QubWFs"]Subaru BRZ Supercharged big blower option - YouTube[/ame]

MRT is running a 95mm pulley and had to modify the hood.

s2d4 · 03-08-2015, 11:11 PM

Don't even get me started on MRT

03-07-2015, 03:38 PM	#175
ICantAffordAnLFA Senior Member Join Date: May 2012 Drives: Brz, Legacy Location: London, England Posts: 320 Thanks: 36 Thanked 120 Times in 66 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Built motor Tick 210 installed Tick What am I waiting for __________________ Trackday ride with built motor Mods: Going, Stopping, Handling Parts: CP, Pauter, Sprintex, Ecutek, Milltek, STI, Rays, Defi, Essex AP Racing, Bilstein, Whiteline, Perrin, RacerX

03-08-2015, 11:11 PM	#182
s2d4 Senior Member Join Date: Mar 2013 Drives: R32 GTR, AW11 MR2 SC, GTS86 R Location: OZ Posts: 2,615 Thanks: 603 Thanked 1,223 Times in 708 Posts Mentioned: 35 Post(s) Tagged: 0 Thread(s)	Don't even get me started on MRT __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The new sprintex 335 supercharger	jet86	Forced Induction	39	11-01-2014 11:27 AM
Innovate/sprintex SC	rudysaliby	Scion FR-S / Toyota 86 GT86 General Forum	3	10-28-2014 03:14 PM
Innovate/ Sprintex vs vortech	GeeTee86	AFRICA	24	04-04-2014 02:38 PM
Innovate/ Sprintex vs vortech	GeeTee86	AFRICA	5	03-05-2014 07:26 AM
TyperRspec789's Full Blown Stage 1 Base Turbo & e85 Progress and Testing	TyperRspec789	Forced Induction	63	12-31-2013 07:39 PM

03-06-2015, 05:47 PM	#170
Xero-Limit Join Date: Nov 2012 Drives: JDL Turbo FRS, 335SC BRZ (ret) Location: Lehigh Valley, PA Posts: 932 Thanks: 368 Thanked 1,547 Times in 525 Posts Mentioned: 380 Post(s) Tagged: 6 Thread(s)	It is official! Upgrade kits are ready to ship for 210 folks. This includes the blower, rear elbow with fittings (still plastic), and the pulley. Ships with an 80, 85's are available just like the regular kit (85 extra).

03-06-2015, 05:49 PM	#171
brianhj Senior Member Join Date: Jul 2013 Drives: 2017 Camaro 1SS Location: Houston, TX Posts: 869 Thanks: 321 Thanked 347 Times in 199 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	drools

03-07-2015, 12:35 PM	#174
Lawnik Senior Member Join Date: Mar 2012 Drives: Flat grey Toyota 86 Location: Edmonton, AB Posts: 397 Thanks: 545 Thanked 155 Times in 86 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	It's on their website http://www.moto-east.com/store/brz-s...c-335-upg.html

03-08-2015, 01:15 AM	#178
Jmonty Realtor/ Principal Broker Join Date: Oct 2013 Drives: JRSC BRZ GBS LTD 2010 LTD Outback Location: Salem Oregon Posts: 899 Thanks: 806 Thanked 218 Times in 178 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	is there a group buy for this kit?

03-08-2015, 12:10 PM	#180
Jmonty Realtor/ Principal Broker Join Date: Oct 2013 Drives: JRSC BRZ GBS LTD 2010 LTD Outback Location: Salem Oregon Posts: 899 Thanks: 806 Thanked 218 Times in 178 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	so has there been any more evidence of this kik on a stock motor / stock internals?

User Name		Remember Me?
Password