Should I go with Nitrous

[go_a_way1]

Originally Posted by Summerwolf

I don't see how you would effectively mount a 10 lb + bottle with a blow down tube there. The only "logical" place would be the spare wheel well to me. You have to drill a hole through the body for the blow down, and with the wiring for the heater and everything you want some space around the bottle. Plus the wiring and lines and everything are not attractive per se. Wow why did I not think of this hahaha! I was worried about where to drill holes but thats perfect!! Thanks!


The purge, you ideally want it where YOU can see it so you know you have a good purge, out the cowl or out the side vent would be ideal...just in the engine bay, probably not. Yeah I was thinking that I should provably be able to see it. If I purged it too long would liquid NO2 spill out? I like the side vent area but if someone walks by or is beside me I dont want to freeze them lol


The stress / cost comment.... I'm not sure. You can have a stress related failure no matter what. You just have to make sure you're doing it as safe as possible. A 50 shot really isn't that much though, lol. Yeah this is something I will just have to take a risk on, like any other FI

Originally Posted by wbradley

You will need to tub out the car and put on Mickey Thompson tires on 12" W wheels to hook up. Sounds like a plan if you want to start drag racing, which these cars were not designed for.

So, no.
LOL I am not going to be drag racing. on the highway this car could use a little more power but around town its perfect for me. Only time I would fire it is when I am going 100kph already and need that little extra push

Reply's in red

[SoundsOfTheUniverse]

Originally Posted by go_a_way1

I would fry my piston rings and blow the welds on my intake dhu?

If you need it, I have the number for the Mad Scientist for when you need to rip apart the block and replace your fried piston rings.

[Leonardo]

via Imgflip Meme Maker

[go_a_way1]

Originally Posted by SoundsOfTheUniverse

If you need it, I have the number for the Mad Scientist for when you need to rip apart the block and replace your fried piston rings.

I am the mad scientist

[Ashikabi]

Ohohoh! Hide it under the passenger seat!

[SoundsOfTheUniverse]

Originally Posted by go_a_way1

I am the mad scientist

Don't race him bro, he's probably got over a hundred grand under that hood!!

[go_a_way1]

Originally Posted by Ashikabi

Ohohoh! Hide it under the passenger seat!

haha a 15lb bottle is huge. I 5lb would be super tight if it would fit at all.

[jawn]

Originally Posted by Ashikabi

Ohohoh! Hide it under the passenger seat!

Have you seen under the passenger seat?

[Ashikabi]

Well obviously he needs a custom seat so he can lift the bottom to open his bottles

[go_a_way1]

Originally Posted by jawn

Have you seen under the passenger seat?

I could replace the passenger seat with 2 15lb bottles

[Leonardo]

Back in my Honda days, my buddy had a sneaky Pete bottle. It fit under the seat. Dare I say "cute" lol.


Here is the smallest. Yeah, its for a trx450r.

[MisterSheep]

Originally Posted by go_a_way1

I could replace the passenger seat with 2 15lb bottles

^ This is one of your better ideas. Who needs passengers? They normally just bitch that you're going too fast anyways. But, with 2 15lb bottles of nitrous as your passengers they will make you more eager to go faster! They say "you know you want me" Nitrous supports your driving habits while most passengers do not. Nitrous doesn't judge you for your driving habits...

Also did I mention weight reduction bro?

[Kestrel]

Originally Posted by Summerwolf

It would take some very odd circumstances to get too hot as to have the bottle build enough pressure to explode or something.

Like driving through the wrong part of town and having Johnny Tran and his boys shoot up your ride?

[go_a_way1]

Well with shipping and everything I want I am looking at 2 grand USD so I think I am going to have to hold off on this for a little while.