PERRIN Big 3" Catback - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DAN_BRZ · 07-03-2013, 04:02 PM

Hey guys/gals,

Just installed my Perrin header back setup over the weekend, thought i would share some pics/sound clips for anyone that is thinking of this setup for the FRS/BRZ.

First off, i want to give a big big big thanks to Molly @ Perrin (your awesome) for working with me on this setup and Mladen(you aiight too!! haha) for being a super helpful guy as well! Perrin has some great employees working there, their customer service is outstanding.

The quality of this exhaust is amazing, everything from the welds, fitment(perfect zero install issues) to the exhaust note(omg). I couldnt be happier with the way everything turned out.

This setup shows gains of 3-4whp over the perrin 2.5" header back setup. Perrin should be releasing there dyno #'s soon! Sounds like pure sexy times. No drone at all, no rattles, no rasp, just a nice deep tuned sounding exhaust tone. I can keep a normal conversation @ hwy speeds, it is louder then stock though.

A few other exhausts that i was considering:

GReddy Evo catback 2.75" (stupid loud w/o silencers, drones bad around 3k, not a fan of huge ricer cans either)

Invidia N1 catback 2.36" (loud as well, with some drone, piping is rather small, would have to upgrade when i go FI)

Nameless axle back (price is right, good quality from what ive read but was not a fan of their place ur order then we build it strategy with no guarenteed eta)

Engine Mods are:

Perrin 3" catback
Perrin 2.5" overpipe/downpipe combo
(will upgrade to 3" op/dp once perrin releases it)
Perrin crank pulley
TRD CAI

will post more photos & sound clips when i get home tonight!

Thanks, any feed back is welcome! Positive or negative. Cheers!

DAN_BRZ · 07-03-2013, 04:03 PM

reserved for pics/sound clips

Kimsey47 · 07-03-2013, 04:08 PM

I'm:

PERRIN_Mladen · 07-03-2013, 04:48 PM

Quote:

Originally Posted by DAN_BRZ

Hey guys/gals,

Just installed my Perrin header back setup over the weekend, thought i would share some pics/sound clips for anyone that is thinking of this setup for the FRS/BRZ.

First off, i want to give a big big big thanks to Molly @ Perrin (your awesome) for working with me on this setup and Mladen(you aiight too!! haha) for being a super helpful guy as well! Perrin has some great employees working there, their customer service is outstanding.

The quality of this exhaust is amazing, everything from the welds, fitment(perfect zero install issues) to the exhaust note(omg). I couldnt be happier with the way everything turned out.

This setup shows gains of 3-4whp over the perrin 2.5" header back setup. Perrin should be releasing there dyno #'s soon! Sounds like pure sexy times. No drone at all, no rattles, no rasp, just a nice deep tuned sounding exhaust tone. I can keep a normal conversation @ hwy speeds, it is louder then stock though.

A few other exhausts that i was considering:

GReddy Evo catback 2.75" (stupid loud w/o silencers, drones bad around 3k, not a fan of huge ricer cans either)

Invidia N1 catback 2.36" (loud as well, with some drone, piping is rather small, would have to upgrade when i go FI)

Nameless axle back (price is right, good quality from what ive read but was not a fan of their place ur order then we build it strategy with no guarenteed eta)

Engine Mods are:

Perrin 3" catback
Perrin 2.5" overpipe/downpipe combo
(will upgrade to 3" op/dp once perrin releases it)
Perrin crank pulley
TRD CAI

will post more photos & sound clips when i get home tonight!

Thanks, any feed back is welcome! Positive or negative. Cheers!

Hey Dan,
Glad to see that you are very pleased with your setup! I'm glad to hear that I'm aiiggght

Haha. We appreciate the positive feedback!

Looking forward to the videos as you post them! Also, I have an update for you in regards to a part you were interested in, so if you can shoot me a PM or give me a call, I can give you all the details.

Enjoy the new setup and let me know if you need anything else boss!

Now go

!

ST185RC · 07-03-2013, 04:53 PM

I don't like how you have one and I don't. Please PM me your address so I can swap mine with yours then the feedback will be positive

PERRIN_Mladen · 07-03-2013, 05:00 PM

Quote:

Originally Posted by ST185RC

I don't like how you have one and I don't. Please PM me your address so I can swap mine with yours then the feedback will be positive

Just make sure to spell it correctly

Kelbyat07 · 07-03-2013, 05:16 PM

Just curious, have you heard the N1 and the Greddy EVO in person?

IF SO: Is the N1 close to being as loud as the Greddy?

ST185RC · 07-03-2013, 06:37 PM

Quote:

Originally Posted by PERRIN_Mladen

Just make sure to spell it correctly

Ahahahaha, you'll never let that go.

Juanito08 · 07-03-2013, 06:55 PM

Quote:

Originally Posted by PERRIN_Mladen

Hey Dan,
Glad to see that you are very pleased with your setup! I'm glad to hear that I'm aiiggght

Haha. We appreciate the positive feedback!

Looking forward to the videos as you post them! Also, I have an update for you in regards to a part you were interested in, so if you can shoot me a PM or give me a call, I can give you all the details.

Enjoy the new setup and let me know if you need anything else boss!

Now go

!

You guys will offer a 3" over pipe? Can you please pm the the details

PERRIN_Mladen · 07-03-2013, 07:05 PM

Quote:

Originally Posted by Juanito08

You guys will offer a 3" over pipe? Can you please pm the the details

No, we will not be offering a 3" overpipe. That is one of the things I was going to correct Dan about and forgot to mention it.

However, we will be offering a 3" front pipe.

Juanito08 · 07-03-2013, 07:30 PM

Quote:

Originally Posted by PERRIN_Mladen

No, we will not be offering a 3" overpipe. That is one of the things I was going to correct Dan about and forgot to mention it.

However, we will be offering a 3" front pipe.

I already have a 3" front pipe , can you provide info of where I can purchase material to maybe get one made?

FT-86 SpeedFactory · 07-03-2013, 07:47 PM

Looks good. Had a few happy people get theirs shipped out today.

Knickstape · 07-03-2013, 07:47 PM

Quote:

Originally Posted by PERRIN_Mladen

No, we will not be offering a 3" overpipe. That is one of the things I was going to correct Dan about and forgot to mention it.

However, we will be offering a 3" front pipe.

Just curious as to why you won't be doing a 3" overpipe? No room?

TOZER · 07-03-2013, 09:56 PM

Quote:

Originally Posted by FT-86 SpeedFactory

Looks good. Had a few happy people get theirs shipped out today.

very very very happy

07-03-2013, 04:02 PM	#1
DAN_BRZ Senior Member Join Date: Apr 2013 Drives: 2013 WRB BRZ Sport Tech Location: Mississauga Posts: 413 Thanks: 311 Thanked 122 Times in 73 Posts Mentioned: 7 Post(s) Tagged: 2 Thread(s)	PERRIN Big 3" Catback Hey guys/gals, Just installed my Perrin header back setup over the weekend, thought i would share some pics/sound clips for anyone that is thinking of this setup for the FRS/BRZ. First off, i want to give a big big big thanks to Molly @ Perrin (your awesome) for working with me on this setup and Mladen(you aiight too!! haha) for being a super helpful guy as well! Perrin has some great employees working there, their customer service is outstanding. The quality of this exhaust is amazing, everything from the welds, fitment(perfect zero install issues) to the exhaust note(omg). I couldnt be happier with the way everything turned out. This setup shows gains of 3-4whp over the perrin 2.5" header back setup. Perrin should be releasing there dyno #'s soon! Sounds like pure sexy times. No drone at all, no rattles, no rasp, just a nice deep tuned sounding exhaust tone. I can keep a normal conversation @ hwy speeds, it is louder then stock though. A few other exhausts that i was considering: GReddy Evo catback 2.75" (stupid loud w/o silencers, drones bad around 3k, not a fan of huge ricer cans either) Invidia N1 catback 2.36" (loud as well, with some drone, piping is rather small, would have to upgrade when i go FI) Nameless axle back (price is right, good quality from what ive read but was not a fan of their place ur order then we build it strategy with no guarenteed eta) Engine Mods are: Perrin 3" catback Perrin 2.5" overpipe/downpipe combo (will upgrade to 3" op/dp once perrin releases it) Perrin crank pulley TRD CAI will post more photos & sound clips when i get home tonight! Thanks, any feed back is welcome! Positive or negative. Cheers!

07-03-2013, 04:08 PM	#3
Kimsey47 Senior Member Join Date: Mar 2012 Drives: 2016 STI DGM Location: Chattanooga, TN Posts: 1,875 Thanks: 1,189 Thanked 1,460 Times in 662 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	I'm: __________________ Subaru STI :

07-03-2013, 05:16 PM	#7
Kelbyat07 Poor College Kid Join Date: Mar 2013 Drives: ~.~ Location: Chicago Posts: 2,801 Thanks: 246 Thanked 2,182 Times in 1,249 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Just curious, have you heard the N1 and the Greddy EVO in person? IF SO: Is the N1 close to being as loud as the Greddy? __________________ Last edited by Kelbyat07; 07-03-2013 at 05:26 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin 2.5" Non Res Catback	Pudge Ate Me	Engine, Exhaust, Transmission	8	06-08-2013 01:11 AM
WTB: Perrin Catback system	WRB_BRZ	Engine, Exhaust, Bolt-Ons	0	05-09-2013 10:22 PM
anyone with Perrin Resonated Catback?	Tylub	Southern California	5	04-02-2013 07:55 PM
Nameless DP and Perrin Catback	cnk	Engine, Exhaust, Transmission	4	09-21-2012 11:58 PM
Perrin Catback w/ Resonator	Minetious	Engine, Exhaust, Transmission	10	09-08-2012 11:24 AM

07-03-2013, 04:03 PM	#2
DAN_BRZ Senior Member Join Date: Apr 2013 Drives: 2013 WRB BRZ Sport Tech Location: Mississauga Posts: 413 Thanks: 311 Thanked 122 Times in 73 Posts Mentioned: 7 Post(s) Tagged: 2 Thread(s)	reserved for pics/sound clips

07-03-2013, 04:53 PM	#5
ST185RC Senior Member Join Date: Jul 2012 Drives: White Out FR-S Location: Canada Posts: 672 Thanks: 31 Thanked 511 Times in 242 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I don't like how you have one and I don't. Please PM me your address so I can swap mine with yours then the feedback will be positive

07-03-2013, 07:47 PM	#12
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Looks good. Had a few happy people get theirs shipped out today.

User Name		Remember Me?
Password