Move Over Racing Bumper Q/R's. Interest? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

diirk · 09-29-2014, 06:55 PM

Quote:

Originally Posted by sirsol66

As long as no drilling of the fender is necessary (bolt on to fender, drill into bumper), I'm in even at $225. It'd be nice to have a bolt on solution as my bumper is driving me crazy.

From the other installs I've seen, the bumper should be the only part modified.

Dave-ROR · 09-29-2014, 07:28 PM

Quote:

Originally Posted by diirk

Do you have a trick to get it to line back up right. I have yet to see one line back up properly after the bumper has been removed. Not saying it isn't possible. I heard the CSG has it down pat too.

I thought about using Dzus fasteners, but these just looked cleaner. I'm going for a combo of form and function. And in my case, I don't consider it pointless. I want my bumper to line up properly.

Honestly I've never had a problem. Lucky maybe? Not sure but it lines up the same as it did when it was new. Maybe mine is just bad fitment from the factory so I haven't noticed it being different

DZUS is junk compared to camlocks, tridairs, etc

1Cor10:23 · 09-29-2014, 11:13 PM

Sub'in. Happy to help out in Toronto as well

let me know.

diirk · 09-29-2014, 11:53 PM

Quote:

Originally Posted by 1Cor10:23

Sub'in. Happy to help out in Toronto as well

let me know.

PM sent

Vic · 09-30-2014, 01:44 AM

definitely interested! Keep us posted!

Foobar · 09-30-2014, 07:00 AM

Interested, but not likely to buy in at that price.

My bumper has been off maybe 4 times in the past 4 years, it doesn't latch on to the tabs at all now. Maybe my intercooler is causing a tight fit, I don't know, but other stock guys have the same issue as well.

Sent from my Nexus 5 using Tapatalk

diirk · 09-30-2014, 08:02 AM

Quote:

Originally Posted by Foobar

Interested, but not likely to buy in at that price.

My bumper has been off maybe 4 times in the past 4 years, it doesn't latch on to the tabs at all now. Maybe my intercooler is causing a tight fit, I don't know, but other stock guys have the same issue as well.

Sent from my Nexus 5 using Tapatalk

I'm in the same boat as you. I've only had my bumper off a couple of times, but I figure in my case it's partly the intercooler and partly the relocated washer resevior.

I'm hoping the price will come in lower than the guess. But I'd rather estimate higher and drop the price than lower and have to increase.

OmarGC · 09-30-2014, 09:54 AM

Keep in mind the quik latch fasteners cost $24-28 a pop + if you desire the tension spring setup which is worth it... Rest of the cost would be making your own brackets and materials for them. So its more than a $100 easily in parts/material. Not to mention the time/headache you may spend getting it right the first time.

I'm interested... My bumper comes off more than the average Joe for sure and I'll pay for the convenience and cleanliness of their past setups. Not to mention my undertray and bumper are not attached to each other and I'm deleting my sidemarkers. So underhood hardware removed, 4 quick latches, and 6 wheel well plastic fasteners ftw

diirk · 09-30-2014, 10:09 AM

So I just received an update from Move Over Racing.

They've lined up a couple of people to test fit/develop the kit. They're quite happy with the response so far and are "getting this going sooner rather than later". That's great news.

They've offered up the possibility of a group buy and are hoping to have the prototype done within a month.

Foobar · 09-30-2014, 10:13 AM

Quote:

Originally Posted by OmarGC

Keep in mind the quik latch fasteners cost $24-28 a pop + if you desire the tension spring setup which is worth it... Rest of the cost would be making your own brackets and materials for them. So its more than a $100 easily in parts/material. Not to mention the time/headache you may spend getting it right the first time.

My hesitation to buy in at over 200 is based on their previous group buy for the Veloster guys where it was 165 for billet aluminum, 180 for black, 195 for red or blue.

At 180 for black, I am all in.

Sent from my Nexus 5 using Tapatalk

diirk · 09-30-2014, 10:28 AM

Quote:

Originally Posted by Foobar

My hesitation to buy in at over 200 is based on their previous group buy for the Veloster guys where it was 165 for billet aluminum, 180 for black, 195 for red or blue.

At 180 for black, I am all in.

Sent from my Nexus 5 using Tapatalk

I think we'll be able to get close to that price, but that's dependent on how many people we get.

Again, let me reiterate. I am not affiliated with this company in any way. I just saw the possibility of them mfg a product I was interested in and asked them about it. Then volunteered to try and help get the ball rolling for totally selfish reasons....

RFB · 09-30-2014, 10:54 AM

Worth every penny.

CERBERUS

s2d4 · 09-30-2014, 11:25 AM

Let's hope they pull through this time, I asked them back in Nov 2013 and this was their reply.

"Yes we should have something in the next couple weeks. they are around 200"

diirk · 09-30-2014, 11:46 AM

Quote:

Originally Posted by s2d4

Let's hope they pull through this time, I asked them back in Nov 2013 and this was their reply.

"Yes we should have something in the next couple weeks. they are around 200"

I hope so. They seem pretty motivated this time.

View Poll Results: Would you be interested in purchasing this product?
Yes	182	70.82%
No	24	9.34%
Maybe	51	19.84%
Voters: 257. You may not vote on this poll

09-29-2014, 11:13 PM	#17
1Cor10:23 Senior Member Join Date: Jul 2013 Drives: '13 Whiteout FR-S (M/T) Location: GTA Posts: 1,205 Thanks: 492 Thanked 392 Times in 238 Posts Mentioned: 14 Post(s) Tagged: 1 Thread(s)	Sub'in. Happy to help out in Toronto as well let me know. __________________ \|1Cor10:23 \| Whiteout FR-S \| Form Follows Function Build\|

09-30-2014, 09:54 AM	#22
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	Keep in mind the quik latch fasteners cost $24-28 a pop + if you desire the tension spring setup which is worth it... Rest of the cost would be making your own brackets and materials for them. So its more than a $100 easily in parts/material. Not to mention the time/headache you may spend getting it right the first time. I'm interested... My bumper comes off more than the average Joe for sure and I'll pay for the convenience and cleanliness of their past setups. Not to mention my undertray and bumper are not attached to each other and I'm deleting my sidemarkers. So underhood hardware removed, 4 quick latches, and 6 wheel well plastic fasteners ftw __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

09-30-2014, 11:25 AM	#27
s2d4 Senior Member Join Date: Mar 2013 Drives: R32 GTR, AW11 MR2 SC, GTS86 R Location: OZ Posts: 2,615 Thanks: 603 Thanked 1,223 Times in 708 Posts Mentioned: 35 Post(s) Tagged: 0 Thread(s)	Let's hope they pull through this time, I asked them back in Nov 2013 and this was their reply. "Yes we should have something in the next couple weeks. they are around 200" __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FRS front bumper garnish, interest?	tunami	Cosmetic Modification (Interior/Exterior/Lighting)	73	07-22-2015 11:53 PM
Just about ready to move on...	SCharged	Scion FR-S / Toyota 86 GT86 General Forum	75	10-07-2013 04:05 PM
Anybody else about to move on?	TylerLieberman	Scion FR-S / Toyota 86 GT86 General Forum	357	09-19-2013 08:51 AM

09-30-2014, 01:44 AM	#19
Vic 63 Auto Body Join Date: Jun 2013 Drives: 2013 SCION FR-S WHITEOUT Location: NYC Posts: 258 Thanks: 84 Thanked 130 Times in 68 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	definitely interested! Keep us posted!

09-30-2014, 10:54 AM	#26
RFB Senior Member Join Date: Aug 2013 Drives: FRS Location: Canada Posts: 936 Thanks: 145 Thanked 422 Times in 289 Posts Mentioned: 8 Post(s) Tagged: 1 Thread(s)	Worth every penny. CERBERUS

User Name		Remember Me?
Password