P0335 after engine rebuild - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Greg555 · 12-26-2017, 09:49 PM

Hi all

I picked up a Texas flood BRZ

Its a '17 with Brembos

I bought it with intention of building a race car but when it arrived I changed my mind because interior was in perfect condition. No water got in.

Bad news the water got in the engine ....long story short I got a new shortblock for it.

fast forward 3 days and I am trying to start it and no go
Ive done a ton of EJs (guessing 30+) but this was my first FA

I get the 335 code for the crank sensor

Any ideas? Is it possible that I've installed the crank trigger wheel wrong?

I remember it had an alignment pin but could I install it backwards?

Any ideas?

Thx
Greg

Ultramaroon · 12-26-2017, 10:21 PM

Yes, it's a common mistake. Comes down to a coin toss if you did not note the orientation of the plate when you disassembled it. Link to the service manuals in my sig line.

Greg555 · 12-26-2017, 10:24 PM

Quote:

Originally Posted by Ultramaroon

Yes, it's a common mistake. Comes down to a coin toss if you did not note the orientation of the plate when you disassembled it.

I just got from under the car. Pulled that little cover and noticed the teeth are pointing backwards so yes you are right, common mistake.

That's what I get for trying to put the engine in after midnight

Ultramaroon · 12-26-2017, 10:49 PM

Quote:

Originally Posted by Greg555

I just got from under the car. Pulled that little cover and noticed the teeth are pointing backwards so yes you are right, common mistake.

That's what I get for trying to put the engine in after midnight

Welcome to the forum. (edit: Oh, shit. You joined before me.)

Years ago I set myself a hard rule to stop working on anything in the garage after dark.

My error rate plummeted after that.

humfrz · 12-26-2017, 11:03 PM

Quote:

Originally Posted by Ultramaroon

Welcome to the forum. (edit: Oh, shit. You joined before me.)

Years ago I set myself a hard rule to stop working on anything in the garage after dark.

My error rate plummeted after that.

Yep, likewise here (sort of).

humfrz

Ultramaroon · 12-26-2017, 11:13 PM

Quote:

Originally Posted by humfrz

Yep, likewise here (sort of).

humfrz

Greg555 · 12-27-2017, 12:46 AM

And Im done

Greg555 · 12-27-2017, 12:51 AM

running. No check engine

Took me about 2 hrs so not bad for the first time brz trans out

Ultramaroon · 12-27-2017, 01:37 AM

Quote:

Originally Posted by Greg555

And Im done

Great!

Now don't do that again.

Greg555 · 12-27-2017, 01:40 AM

extra work but oh well

Had it idle for 20 mins and all looks good. No leaks. No funny noises.

I can go to sleep now.

Thanks everyone for help.
Greg

RD1428 · 12-27-2017, 11:32 PM

Hey, just curious. Where did you pick it up from? I’ve been wanting to do the same

12-26-2017, 09:49 PM	#1
Greg555 Junior Member Join Date: Feb 2013 Drives: many Location: Chicago Posts: 6 Thanks: 0 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	P0335 after engine rebuild Hi all I picked up a Texas flood BRZ Its a '17 with Brembos I bought it with intention of building a race car but when it arrived I changed my mind because interior was in perfect condition. No water got in. Bad news the water got in the engine ....long story short I got a new shortblock for it. fast forward 3 days and I am trying to start it and no go Ive done a ton of EJs (guessing 30+) but this was my first FA I get the 335 code for the crank sensor Any ideas? Is it possible that I've installed the crank trigger wheel wrong? I remember it had an alignment pin but could I install it backwards? Any ideas? Thx Greg Attached Images

12-26-2017, 10:21 PM	#2
Ultramaroon 義理チョコ Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 31,867 Thanks: 52,126 Thanked 36,517 Times in 18,919 Posts Mentioned: 1106 Post(s) Tagged: 9 Thread(s)	Yes, it's a common mistake. Comes down to a coin toss if you did not note the orientation of the plate when you disassembled it. Link to the service manuals in my sig line. __________________ service manuals

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sunny's 3SGE BEAMS FRS. Full Engine Rebuild.	Toxicmilk45	Member's Car Journals	90	09-20-2018 01:33 AM
Engine won't start after rebuild	septonb	Engine, Exhaust, Transmission	7	05-26-2017 10:48 PM
DTC: P0335, P0011, P0345, P0340	SolderGlob	Issues \| Warranty \| Recalls / TSB	8	01-13-2017 01:37 PM
Would you rebuild your gearbox or buy another?	radroach	Engine, Exhaust, Transmission	20	11-04-2016 09:44 AM
For the engine rebuild gurus	puma	Engine, Exhaust, Transmission	9	09-08-2016 06:33 AM

12-27-2017, 12:46 AM	#7
Greg555 Junior Member Join Date: Feb 2013 Drives: many Location: Chicago Posts: 6 Thanks: 0 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	And Im done

12-27-2017, 12:51 AM	#8
Greg555 Junior Member Join Date: Feb 2013 Drives: many Location: Chicago Posts: 6 Thanks: 0 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	running. No check engine Took me about 2 hrs so not bad for the first time brz trans out

12-27-2017, 01:40 AM	#10
Greg555 Junior Member Join Date: Feb 2013 Drives: many Location: Chicago Posts: 6 Thanks: 0 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	extra work but oh well Had it idle for 20 mins and all looks good. No leaks. No funny noises. I can go to sleep now. Thanks everyone for help. Greg

12-27-2017, 11:32 PM	#11
RD1428 Senior Member Join Date: Sep 2012 Drives: 2013 Scion FRS Location: CA/NH Posts: 209 Thanks: 16 Thanked 44 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Hey, just curious. Where did you pick it up from? I’ve been wanting to do the same

User Name		Remember Me?
Password