DIY - 2015 OEM Sharkfin antenna retrofit - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sarlacc · 02-06-2015, 01:24 PM

Thanks for the excellent info!
I'm sorry to see the hole is so big, I've been toying with the idea of an antenna delete. (Don't listen to radio anyway)
The new 2015 OEM sharkfin looks allright though, so I'm tempted.

Guillaume · 02-20-2015, 06:27 PM

I finally had the antenna installed. The colour match is really good between the new and old WRB.

dutchdabomb · 03-15-2015, 08:21 PM

Quote:

Originally Posted by White64Goat

Is 22mm correct? That seems huge........

Performance compared to original?

I just did this DIY yesterday and can confirm that the bolt is in fact 22mm. My socket set only had up to 17mm and I had to go buy a 22mm socket.

mid_life_crisis · 07-24-2015, 03:03 PM

So if I drive an FR-S and am considering adding satellite radio, I should get the BRZ version? Does it have the sat antenna in it or is it just the wiring?

BlackJesus · 07-24-2015, 10:27 PM

Quote:

Originally Posted by mid_life_crisis

So if I drive an FR-S and am considering adding satellite radio, I should get the BRZ version? Does it have the sat antenna in it or is it just the wiring?

Does your frs have the sat radio option? If not then you'll have to spend extra on an adapter or a new headunit that supports it. Contact the fin seller and make sure that it comes with 2 wiring. One for the standard radio ehich is like a 4 port plug and a coax looking cable with all connects to the sharkfin transmitter. Brz/frs fins should all be made by the same company if oem. Just remember to ask for that option when placing an order. Btw sat radio is decent but it's not worth the $10-30 a month. It plays the same 10 song all over again for 1 week on each radio station. You might be better off getting an extra Ipod or tablet device and use bluetooth. If music is your thing then go with tmobile data services which have unlimited spotify and Pandora streaming for sbout $10 a month

stevesnj · 07-24-2015, 11:14 PM

Whats the dimensions of the cutout on the roof? anyone happen to know? thanks!

Jolt182 · 07-25-2015, 12:08 AM

How much does that OEM antenna cost?

BoxRZ_86 · 07-25-2015, 12:26 AM

If I remember correctly it's like 118

Sent from my iPhone using Tapatalk

Monkey_Boy · 07-26-2015, 06:16 PM

Just put this on my '14 WRB BRZ Limited. Everything went very smoothly, though I did not have a 22mm socket either and had to go pick one up. Most socket kits seem to go up to 19mm, but not beyond. The 22mm sockets all seem to be 1/2 in drive, too, so make sure you HAVE a 1/2 in drive ratchet if you just go get a new socket. I did not (had 1/4 and 3/8 in) so I opted for one of Kobalt's kits that had the right socket and the right ratchet.

The head liner is pretty easy to work with. The hardest part of the DIY was re-taping the plug(s) to the small, black support that holds it. I removed the original grey tape to get a better angle on the squeeze release for the plug and then replaced it with black electrical tape once it was all back together. I had to get both hands up in the head liner to do that, and it was awkward.

Radio works just fine (XM and all of the standard bands) and it looks great. Good mod!

Sookainian · 08-04-2015, 03:52 AM

can someone please help me to double confirm the part number for the OEM Shark Fin antenna in Galaxy Blue is SU003-05514 ?

I tired contacting my local toyota dealer but they say there's no such part in their system. I also tried asking Japanparts, but they are not sure.

jp-carpart told me that the correct number is SU003-05507. But it's only for their JDM 86. Any idea whats the diff with 05514 and 05507 ?

Did a google search too but some show SU003-05514 is the stock antenna. Im lost...

http://www.toyotajaxparts.com/oe-toyota/su00305514

kbye · 08-25-2015, 10:06 AM

Quote:

Originally Posted by Sookainian

can someone please help me to double confirm the part number for the OEM Shark Fin antenna in Galaxy Blue is SU003-05514 ?

I tired contacting my local toyota dealer but they say there's no such part in their system. I also tried asking Japanparts, but they are not sure.

jp-carpart told me that the correct number is SU003-05507. But it's only for their JDM 86. Any idea whats the diff with 05514 and 05507 ?

Did a google search too but some show SU003-05514 is the stock antenna. Im lost...

http://www.toyotajaxparts.com/oe-toyota/su00305514

Sorry didn't see this earlier, hopefully you have it sorted out by now.

The part numbers I listed are for USDM, so it's very possible that the part numbers are different for your country. I can't guarantee that if you order #05514 that it will work on your GT86, since there may be differences in radio design depending on the regon. Your best bet is to ask your local dealer to look it up, they should have it in their system.

Trap63 · 08-25-2015, 03:29 PM

Quote:

Originally Posted by Sookainian

can someone please help me to double confirm the part number for the OEM Shark Fin antenna in Galaxy Blue is SU003-05514 ?

I tired contacting my local toyota dealer but they say there's no such part in their system. I also tried asking Japanparts, but they are not sure.

jp-carpart told me that the correct number is SU003-05507. But it's only for their JDM 86. Any idea whats the diff with 05514 and 05507 ?

Did a google search too but some show SU003-05514 is the stock antenna. Im lost...

http://www.toyotajaxparts.com/oe-toyota/su00305514

these are the right part no. for JDM Toyota (JPN/Asia frequencies 5507), since 2014 MY
http://jp-carparts.com/toyota/partli...pe=15&fig=8604

#5514 is the US/CDN part , means "SCION FR-S" as Scion is only a North American brand and you cannot buy outside US, thus Toyota is.
See post #1 (it's easy, scroll up) to better understand...

If your paint code is E8H Toyota galaxy blue silica you can buy the Subaru one's (worldwide unique part) 86321CA610B5 - Galaxy Blue Pearl E8H.

kbye · 08-25-2015, 04:01 PM

Quote:

Originally Posted by Trap63

these are the right part no. for JDM Toyota (JPN/Asia frequencies 5507), since 2014 MY
http://jp-carparts.com/toyota/partli...pe=15&fig=8604

#5514 is the US/CDN part , means "SCION FR-S" as Scion is only a North American brand and you cannot buy outside US, thus Toyota is.
See post #1 (it's easy, scroll up) to better understand...

If your paint code is E8H Toyota galaxy blue silica you can buy the Subaru one's (worldwide unique part) 86321CA610B5 - Galaxy Blue Pearl E8H.

Thanks, updated first post.

churchx · 08-25-2015, 05:34 PM

Can anyone check/tell if EUDM part numbers are same or not as those for JDM?

02-20-2015, 06:27 PM	#58
Guillaume Senior Member Join Date: Jul 2012 Drives: Exige S 240 Location: Belgium Posts: 732 Thanks: 319 Thanked 602 Times in 287 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I finally had the antenna installed. The colour match is really good between the new and old WRB. __________________ My car

07-24-2015, 03:03 PM	#60
mid_life_crisis Senior Member Join Date: May 2013 Drives: FR-S 10 #103 AT Location: NC Posts: 1,519 Thanks: 101 Thanked 599 Times in 347 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	So if I drive an FR-S and am considering adding satellite radio, I should get the BRZ version? Does it have the sat antenna in it or is it just the wiring? __________________ Necessity may be the mother of Invention but Desperation is quite often the father. “Sex is like Bridge. If you don't have a good partner, you'd better have a good hand.” - Mae West Papa said, "son there's a lot of evil temptations out there. Best to try 'em all so you know which ones to avoid."

07-24-2015, 11:14 PM	#62
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	Whats the dimensions of the cutout on the roof? anyone happen to know? thanks! __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete

08-04-2015, 03:52 AM	#66
Sookainian Senior Member Join Date: Mar 2013 Drives: Toyota GT86 Location: Singapore Posts: 145 Thanks: 7 Thanked 13 Times in 10 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	can someone please help me to double confirm the part number for the OEM Shark Fin antenna in Galaxy Blue is SU003-05514 ? I tired contacting my local toyota dealer but they say there's no such part in their system. I also tried asking Japanparts, but they are not sure. jp-carpart told me that the correct number is SU003-05507. But it's only for their JDM 86. Any idea whats the diff with 05514 and 05507 ? Did a google search too but some show SU003-05514 is the stock antenna. Im lost... http://www.toyotajaxparts.com/oe-toyota/su00305514 Last edited by Sookainian; 08-04-2015 at 04:21 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*NEW*Beatsonic Version 2 Sharkfin Antenna	FT-86 SpeedFactory	Cosmetic Modification (Interior/Exterior/Lighting)	29	03-27-2016 04:32 PM
WTB: sharkfin antenna/clear side markers	_frs	Want-To-Buy Requests	0	10-27-2014 04:02 PM
Nav w/Sharkfin Antenna	Ryan5x	Electronics \| Audio \| NAV \| Infotainment	1	06-25-2014 03:37 PM
Pic Request: Red Beatsonic Sharkfin Antenna on Raven FRS	Lemar58	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	6	03-20-2013 11:26 PM
grazio & co. sharkfin antenna	ategs1992	BRZ First-Gen (2012+) -- General Topics	1	12-09-2012 06:11 PM

07-25-2015, 12:08 AM	#63
Jolt182 Member Join Date: Mar 2015 Drives: Asphalt FRS Location: United States Posts: 85 Thanks: 44 Thanked 27 Times in 21 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	How much does that OEM antenna cost?

07-25-2015, 12:26 AM	#64
BoxRZ_86 Senior Member Join Date: May 2012 Drives: 2013 Subaru BRZ Limited SWP Location: Central NJ Posts: 369 Thanks: 51 Thanked 221 Times in 118 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	If I remember correctly it's like 118 Sent from my iPhone using Tapatalk

07-26-2015, 06:16 PM	#65
Monkey_Boy Bleeds WR Blue Join Date: Jun 2011 Drives: '14 BRZ (WRB), '06 Baja (ABP) Location: KC MO Posts: 102 Thanks: 95 Thanked 27 Times in 21 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Just put this on my '14 WRB BRZ Limited. Everything went very smoothly, though I did not have a 22mm socket either and had to go pick one up. Most socket kits seem to go up to 19mm, but not beyond. The 22mm sockets all seem to be 1/2 in drive, too, so make sure you HAVE a 1/2 in drive ratchet if you just go get a new socket. I did not (had 1/4 and 3/8 in) so I opted for one of Kobalt's kits that had the right socket and the right ratchet. The head liner is pretty easy to work with. The hardest part of the DIY was re-taping the plug(s) to the small, black support that holds it. I removed the original grey tape to get a better angle on the squeeze release for the plug and then replaced it with black electrical tape once it was all back together. I had to get both hands up in the head liner to do that, and it was awkward. Radio works just fine (XM and all of the standard bands) and it looks great. Good mod!

08-25-2015, 05:34 PM	#70
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,333 Thanks: 696 Thanked 2,085 Times in 1,436 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	Can anyone check/tell if EUDM part numbers are same or not as those for JDM?

User Name		Remember Me?
Password