|
DIY (Do-It-Yourself) Guides For all DIYs. |
|
Thread Tools | Search this Thread |
10-27-2014, 07:16 PM | #1 |
Senior Member
Join Date: Feb 2012
Drives: Mazda MX-6 Turbo, Toyota GTS86 37J
Location: Perth, Western Australia
Posts: 1,262
Thanks: 487
Thanked 743 Times in 413 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
|
DIY - Quik Latch Mini install(front bumper)
Just finished this install at 6:30am in the morning..
Prep work: Jack up car, remove wheels if necessary, remove weather stripping under the hood, remove screws/clips. Remove screws/clips under the bumper. Remove screws/clips in the wheel arch. All this should be in a previous DIY on this forum Mask off bumper and fender. Use the small black plastic clip as your mounting point. You want to use the location where the silver phillips self tapper is mounted. Remove the screw. Use a 6.5mm drill and install the threaded part of the QLM. Mark a line in marker directly above where the mounting point is. Also mark off on the bumper area. Drill a pilot hole to see where the little round point is on the QLM. Try to center it, once you have found the center, trace a circle using the button part of the QLM. Use a dremel to remove the excess plastic to fit the QLM button. The rest of the install should be pretty easy. The tricky part for me was trying to find a decent mounting point for the bolt. As you can see from the above pics, the front of my bumper now isn't sagging.
__________________
[CENTER]
Build thread |
The Following 9 Users Say Thank You to stevo_12v For This Useful Post: | 2014scionfrs (12-04-2015), alexand3r (11-30-2014), avishenoy1 (04-20-2016), fstlane (07-04-2015), HotRodPA (02-11-2015), JDKane527 (01-12-2015), Lonewolf (07-03-2015), M1K3 (10-27-2014), Ny Brz (02-13-2015) |
10-27-2014, 07:29 PM | #2 |
Join Date: May 2012
Drives: 2013 Scion FR-S
Location: Gilbert, Arizona
Posts: 2,593
Thanks: 491
Thanked 1,065 Times in 617 Posts
Mentioned: 49 Post(s)
Tagged: 3 Thread(s)
|
By far of the coolest DIY so far! Great addition to the forum!
|
The Following User Says Thank You to vividracing For This Useful Post: | stevo_12v (10-28-2014) |
10-27-2014, 08:05 PM | #3 |
Vtec Jesus
Join Date: Jul 2012
Drives: 13 BRZ, 13 Golf R, 15 Audi S4
Location: LSD
Posts: 1,165
Thanks: 623
Thanked 243 Times in 153 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
Sweet
__________________
OFT Remote, OFH, Motiv OP & FP, Perrin 3' CB & 3' IT, Setrab/MoCal cooler, STI motor mounts, Wilwood 6/4 plot F&R 12.8 kits, Brake ducts, complete Whiteline catalog, complete bushing replacement, OSGiken clutch & Diff, 4.556 FD, Stance W/Spec valving 8/9 Swift.
|
10-29-2014, 01:59 AM | #4 |
Senior Member
Join Date: Mar 2013
Drives: Asphalt FRS <3
Location: Canada
Posts: 660
Thanks: 78
Thanked 142 Times in 102 Posts
Mentioned: 5 Post(s)
Tagged: 1 Thread(s)
|
Where did you buy the part?
__________________
|
10-29-2014, 04:03 AM | #5 |
Senior Addict
Join Date: Jan 2013
Drives: 86 GT
Location: Perth, Australia
Posts: 1,217
Thanks: 249
Thanked 336 Times in 215 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
@stevo_12v can you give us a close up picture of the stud/stem (the part that is fastened to the black bracket below the fender) with the bumper off?
|
10-29-2014, 04:37 AM | #6 |
Senior Member
Join Date: Nov 2013
Drives: 14 FRS Whiteout
Location: Vancouver, BC
Posts: 423
Thanks: 159
Thanked 85 Times in 59 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Sub
|
10-30-2014, 02:23 PM | #8 |
Senior Member
Join Date: Feb 2012
Drives: Mazda MX-6 Turbo, Toyota GTS86 37J
Location: Perth, Western Australia
Posts: 1,262
Thanks: 487
Thanked 743 Times in 413 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
|
REAR BUMPER Install
Update: Made a start on my rear bumper quick release setup. You need 4x of these. Pics below show you the mounting locations.
__________________
[CENTER]
Build thread |
10-30-2014, 02:28 PM | #9 |
Senior Member
Join Date: Sep 2012
Drives: 2013 Scion FR-S
Location: Olympia, WA
Posts: 581
Thanks: 230
Thanked 342 Times in 189 Posts
Mentioned: 7 Post(s)
Tagged: 1 Thread(s)
|
Eyebrows?
What is the purpose of the black plastic "eyebrows?" Do you have a pix of your rig that shows this mod from the front?
Re: Quick Latch... very cool! Ditto on parts list, etc.
__________________
2013 Asphalt / MT
Olympia, Washington Last edited by PNW FRS; 10-30-2014 at 04:57 PM. |
10-30-2014, 03:09 PM | #10 |
Member
Join Date: Oct 2013
Drives: '13 GBS BRZ
Location: San Diego
Posts: 87
Thanks: 3
Thanked 30 Times in 21 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Moar downforce brah.
__________________
OFT + e85, Borla catback, header soon...
|
10-31-2014, 03:12 PM | #11 |
Join Date: Aug 2012
Drives: SWP BRZ
Location: NJ
Posts: 3,177
Thanks: 723
Thanked 667 Times in 507 Posts
Mentioned: 15 Post(s)
Tagged: 2 Thread(s)
|
looks great and clean. i am wondering anyone can push and release bumper though. right? i hope it has like locking mechanism key
|
11-02-2014, 06:37 AM | #12 |
SLO NO MO
Join Date: Jul 2012
Drives: '19 Tesla Model 3 Performance
Location: NY, USA
Posts: 2,961
Thanks: 224
Thanked 1,062 Times in 738 Posts
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
|
|
11-02-2014, 01:13 PM | #13 |
Senior Member
Join Date: Jan 2014
Drives: '13 Argento FR-S (Sold)
Location: Ontario
Posts: 2,126
Thanks: 3,209
Thanked 1,439 Times in 855 Posts
Mentioned: 19 Post(s)
Tagged: 2 Thread(s)
|
Sub'd. Looks awesome!
__________________
|
11-05-2014, 11:29 AM | #14 |
Senior Member
Join Date: Mar 2013
Drives: 2013 WhiteOut FR-S
Location: Dublin,CA
Posts: 969
Thanks: 899
Thanked 492 Times in 306 Posts
Mentioned: 67 Post(s)
Tagged: 2 Thread(s)
|
Nice! @mkivsoopra wanna do this?
__________________
2013 Scion FR-S whiteout 2012 Porsche Panamera S carbon grey 2008 Range Rover Sport SS black - sold 2004 BMW M3 alpine wies - sold |
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: TheRetrofitSource/Morimoto Retro-Quik Install in FR-S | civicdrivr | DIY (Do-It-Yourself) Guides | 236 | 07-10-2017 12:04 AM |
FS: WA _Black Anodized Mini Quik-Latches NEW ..Great fix for bumper fitment issues!! | glamcem | Exterior Parts (Aero, Lighting, Etc.) | 6 | 11-26-2014 01:21 PM |
re-install Front bumper to headlight gap fix | BadBRZ | Forced Induction | 27 | 08-19-2014 08:31 PM |
Rear Bumper removal / bumper latch | SmartedPanda | Cosmetic Modification (Interior/Exterior/Lighting) | 3 | 05-01-2014 01:27 PM |
iPad Mini Install | Xonzo | Electronics | Audio | NAV | Infotainment | 11 | 01-24-2014 09:30 AM |