|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
01-24-2024, 11:53 PM | #1 |
Senior Member
Join Date: Mar 2020
Drives: 2013 Subaru brz limited
Location: Hampton va
Posts: 105
Thanks: 15
Thanked 32 Times in 16 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Magnus launch control device
I have a twin disk comp clutch w/cd009 and tilton hydro bearing. It’s essentially an on/off switch from hell! So I’ve been on the market for a clutch flow control system like clutch master or tilton. The drawback with those is I don’t want to be slipping my clutch in every gear. So I came across a solenoid type control system which only activates via ecu or micro switch only in first gear. I have a stock ecu and have no plans of a standalone ecu so i need to make some sort of switch. A more convenient option that i want is one close to the shifter itself. When in first gear the shifter is pressed against it activating the solenoid and deactivates out of first like a clutch switch but smaller. Anyone know something that can make that happen.
Sent from my iPhone using Tapatalk Last edited by IsaiahW; 01-25-2024 at 10:09 AM. |
01-25-2024, 04:45 PM | #2 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 907
Thanks: 1,460
Thanked 1,213 Times in 516 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Another route you might consider is handling this with a dev board with a CAN transceiver built in like a Adafruit Feather RP2040.
RPM, speed, calculated gear, and clutch position are available over CAN.
__________________
|
01-25-2024, 05:18 PM | #3 | |
Senior Member
Join Date: Mar 2020
Drives: 2013 Subaru brz limited
Location: Hampton va
Posts: 105
Thanks: 15
Thanked 32 Times in 16 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I wish i was as smart as you honestly lol I get completely lost with that stuff it sounds like a pain. Sent from my iPhone using Tapatalk |
|
01-30-2024, 04:53 PM | #4 |
義理チョコ
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 31,869
Thanks: 52,132
Thanked 36,520 Times in 18,921 Posts
Mentioned: 1107 Post(s)
Tagged: 9 Thread(s)
|
Use a smaller diameter master cylinder. That will give you less travel on the TOB.
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help on Launch control disable speed to control wheel spin during launching | j.boy | Software Tuning | 8 | 02-01-2016 04:58 AM |
Best RPM to set OFT Launch Control to? | Aztec | Software Tuning | 12 | 03-23-2015 08:56 PM |