OmarGC's 2JZ Street/Track Toy - Video in later post - Page 10 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OmarGC · 09-07-2014, 08:00 PM

Quote:

Originally Posted by SnapOv3st3r

So Chase Bays makes a harness for the 2jz? Do they also do swaps there?

Yes they do build a harness to run dual ecu/stand alone for our chassis. They do swaps there as well... They actually fab/mass produce a lot of cool helpful things. I'm not sure if they've completed a FRS/brz 2jz swap or not but they do have all the knowledge there.

SnapOv3st3r · 09-08-2014, 09:11 AM

Cool. I still haven't decided if I want to go this route or build the FA20 bottom end and boost it.

Ball park cost of this project, if you are just using a stock 2jz?

Fresh86 · 09-08-2014, 09:29 AM

Very jealous of this build! looks amazing.

OmarGC · 09-08-2014, 03:44 PM

Quote:

Originally Posted by SnapOv3st3r

Cool. I still haven't decided if I want to go this route or build the FA20 bottom end and boost it.

Ball park cost of this project, if you are just using a stock 2jz?

My cost is looking like <$8000

SnapOv3st3r · 09-08-2014, 05:42 PM

Quote:

Originally Posted by OmarGC

My cost is looking like <$8000

Not bad.

Chase Bays · 09-08-2014, 05:58 PM

Quote:

Originally Posted by Drift&Drag

Chase is pretty good with their ETAs. Send them a quick email and check the status bro. Is this the only thing that you're waiting on?

Thanks!

Quote:

Originally Posted by OmarGC

I'm putting things on hold until I get the harness.

Quote:

Originally Posted by OmarGC

Yes they do build a harness to run dual ecu/stand alone for our chassis. They do swaps there as well... They actually fab/mass produce a lot of cool helpful things. I'm not sure if they've completed a FRS/brz 2jz swap or not but they do have all the knowledge there.

We've got about 2 - 2.5 more weeks left on this one. Thank you for the kind words and the support.

OmarGC · 09-09-2014, 06:12 PM

SrtWtF · 09-09-2014, 07:35 PM

Hey Omar what ship is doing this swap for you?

OmarGC · 09-09-2014, 08:21 PM

Quote:

Originally Posted by SrtWtF

Hey Omar what ship is doing this swap for you?

I'm in the STL area now, and some friends at a shop called Nocturnal Motorworks are handling the fabrication and what not. If I had the skills and resources that they do it would be in my garage like everything else...

I'm sure you might find some really cool stuff online about them.

SrtWtF · 09-10-2014, 07:10 PM

Nice, my main reason for asking is I'm a local and I've been looking for a credible shop to do eeither a Ls swap or 2jz but I want the experience and affordable price. Not the typical oh 20 k shit for that I'll do the shit myself lol

OmarGC · 09-10-2014, 08:05 PM

Quote:

Originally Posted by SrtWtF

Nice, my main reason for asking is I'm a local and I've been looking for a credible shop to do eeither a Ls swap or 2jz but I want the experience and affordable price. Not the typical oh 20 k shit for that I'll do the shit myself lol

Local to St. Louis or Orlando? And yeah I'm lucky enough to be around an awesome group of guys that have 1jz, 2jz, LS, and RB swapped just about every chassis you could think of... And don't rape you on pricing just because it's a "not so typical" thing to do aka what you find most shops in California, NY/other tristate areas, and FL.

This will be the first FR-S swap they'll be performing, but they have no lack of confidence and I have nothing but trust and confidence in their fabrication work from what I've witnessed personally throughout my time living in the Midwest.

I'll likely have them cage or partially cage my car as their cage work and pricing is second to none.

SrtWtF · 09-11-2014, 05:26 PM

Quote:

Originally Posted by OmarGC

Local to St. Louis or Orlando? And yeah I'm lucky enough to be around an awesome group of guys that have 1jz, 2jz, LS, and RB swapped just about every chassis you could think of... And don't rape you on pricing just because it's a "not so typical" thing to do aka what you find most shops in California, NY/other tristate areas, and FL.

This will be the first FR-S swap they'll be performing, but they have no lack of confidence and I have nothing but trust and confidence in their fabrication work from what I've witnessed personally throughout my time living in the Midwest.

I'll likely have them cage or partially cage my car as their cage work and pricing is second to none.

Yea bro sounds good an I'm in Miami but use yo make the drive for tuning so a swap is no biggie I'd make the drive for it lol

OmarGC · 09-11-2014, 09:15 PM

First time on the ground in months... #wheelgap

eyedeez · 09-11-2014, 09:26 PM

I need those wheels. LAWD HAVE MURCY!

09-08-2014, 09:29 AM	#129
Fresh86 Senior Member Join Date: Feb 2013 Drives: 2013 Scion FRS Location: Windsor Ontario Canada Posts: 149 Thanks: 9 Thanked 49 Times in 47 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Very jealous of this build! looks amazing. __________________ http://www.ft86club.com/forums/showthread.php?t=30348

09-09-2014, 06:12 PM	#133
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	__________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

09-11-2014, 09:15 PM	#139
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	First time on the ground in months... #wheelgap __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BRZ- Lemon?	laxfogo	Issues \| Warranty \| Recalls / TSB	24	04-05-2013 05:15 PM
So my FR-S is officially a lemon...	frsinpa	Scion FR-S / Toyota 86 GT86 General Forum	90	01-19-2013 11:50 AM
Anyone thinking about lemon law?	Accurate Race Shop	Issues \| Warranty \| Recalls / TSB	16	10-18-2012 09:11 AM
Lemon?	grgonium	Scion FR-S / Toyota 86 GT86 General Forum	13	10-08-2012 10:13 AM

09-08-2014, 09:11 AM	#128
SnapOv3st3r Senior Member Join Date: Apr 2012 Drives: 400whp Scion tC Location: TN Posts: 1,310 Thanks: 676 Thanked 323 Times in 213 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Cool. I still haven't decided if I want to go this route or build the FA20 bottom end and boost it. Ball park cost of this project, if you are just using a stock 2jz?

09-09-2014, 07:35 PM	#134
SrtWtF Member Join Date: Jun 2014 Drives: stock Location: florida Posts: 42 Thanks: 3 Thanked 7 Times in 7 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Hey Omar what ship is doing this swap for you?

09-10-2014, 07:10 PM	#136
SrtWtF Member Join Date: Jun 2014 Drives: stock Location: florida Posts: 42 Thanks: 3 Thanked 7 Times in 7 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Nice, my main reason for asking is I'm a local and I've been looking for a credible shop to do eeither a Ls swap or 2jz but I want the experience and affordable price. Not the typical oh 20 k shit for that I'll do the shit myself lol

09-11-2014, 09:26 PM	#140
eyedeez Senior Member Join Date: Mar 2014 Drives: 2014 Firestorm FR-S 6MT Location: East Bay, CA Posts: 176 Thanks: 211 Thanked 238 Times in 83 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I need those wheels. LAWD HAVE MURCY!

User Name		Remember Me?
Password