Will I be able to fit a FR-S/BRZ bumper in my trunk?

[Brndn704]

Originally Posted by Simplicity

Off topic, but how come you're on your 2nd bumper now? o.O

Via Note 4 using Tapatalk.

Well technically third. My car sits maybe half an inch from the ground right now, I'm close to laying frame and scrape on everything. I've got 3 cracks on the bottom of my bumper

[Touge_ninja]

Originally Posted by jblmr2

No offense OP, but you can probably answer this yourself if you would just get out a measuring tape.

Problem with this board is that people here want to be spoon fed the answers.

[Tcoat]

Originally Posted by jblmr2

No offense OP, but you can probably answer this yourself if you would just get out a measuring tape.

Originally Posted by Touge_ninja

Problem with this board is that people here want to be spoon fed the answers.

This is actually one of the more reasonable questions there has been in a while. With the shape of the bumper a simple measurement is meaningless and there has to be somebody that has tried it before and knows if it works. Not like the OP asked "what is that chirping noise I hear from the front of my car" or "I have this weird smell when I start the car does anybody else have that?"

[Touge_ninja]

Majority is just based on common sense tho.

[Tcoat]

Originally Posted by Touge_ninja

Majority is just based on common sense tho.

There is no such thing!
If there were I would have been out of work years ago.

[xuimod]

Originally Posted by Brndn704

I'm on my second front bumper, and I'm about to pick up another from the Toyota dealer this week. It fits with some work. Lean passenger seat all the way down, take head rest off, and put the bumper in with the front of the bumper facing towards the front windshield. Hopefully you don't have a long drive cause you can't see shit afterwards.

Off-topic: who's the chick in your avatar? Someone you know personally or a celebrity?

[pushrod]

Originally Posted by xuimod

Off-topic: who's the chick in your avatar? Someone you know personally or a celebrity?

http://forum.bodybuilding.com/showth...hp?t=159729221

[Brndn704]

Originally Posted by xuimod

Off-topic: who's the chick in your avatar? Someone you know personally or a celebrity?

Thats me bruh.


Nah, her name is Donnah Pham. In my top 10 of girls I'd give away all my shit to have sex with.

[xuimod]

Originally Posted by Brndn704

Thats me bruh.


Nah, her name is Donnah Pham. In my top 10 of girls I'd give away all my shit to have sex with.

Um, I was kind of hoping it was you or your girlfriend.

Yeah, she's pretty damn hot.

I'm looking at pics of her. I think she got a nosejob done (among other things)..... noses of Vietnamese people usually aren't so pointy. They are usually a bit on the wide side. The plastic surgeon who did it though did a great job, can hardly tell.

[fika84]

I also fit the front bumper in the car. Luckily it is pretty maluable just be careful not to scrape up the interior with the sharp edges!

[Brndn704]

Originally Posted by xuimod

Um, I was kind of hoping it was you or your girlfriend.

Yeah, she's pretty damn hot.

I'm looking at pics of her. I think she got a nosejob done (among other things)..... noses of Vietnamese people usually aren't so pointy. They are usually a bit on the wide side. The plastic surgeon who did it though did a great job, can hardly tell.

lol, nah. I date an asian girl, but she doesn't look like Donnah Pham

But shhh, we won't tell her.

[jblmr2]

Originally Posted by Tcoat

This is actually one of the more reasonable questions there has been in a while. With the shape of the bumper a simple measurement is meaningless and there has to be somebody that has tried it before and knows if it works. Not like the OP asked "what is that chirping noise I hear from the front of my car" or "I have this weird smell when I start the car does anybody else have that?"

@Tcoat, actually simple measurement will tell you that you can't get it in and still close the trunk lid. In less than 5 minutes I discovered that at its most constricted the FRS trunk 13" high. Both the width and the depth of the bumper are over 20". I suppose if the OP isn't going to far with it the open trunk lid is an option, but to my point he could have discovered this himself in less time than it took to write the post.

[Brndn704]

Originally Posted by jblmr2

@Tcoat, actually simple measurement will tell you that you can't get it in and still close the trunk lid. In less than 5 minutes I discovered that at its most constricted the FRS trunk 13" high. Both the width and the depth of the bumper are over 20". I suppose if the OP isn't going to far with it the open trunk lid is an option, but to my point he could have discovered this himself in less time than it took to write the post.

Uhm, I think we all established it can fit in the PASSENGER SEAT.

[Tcoat]

Originally Posted by jblmr2

@Tcoat, actually simple measurement will tell you that you can't get it in and still close the trunk lid. In less than 5 minutes I discovered that at its most constricted the FRS trunk 13" high. Both the width and the depth of the bumper are over 20". I suppose if the OP isn't going to far with it the open trunk lid is an option, but to my point he could have discovered this himself in less time than it took to write the post.

I disagree that it is a simple measurement. With the weird shape just twisting a bit one way or the other could make a huge difference. It is not a nice liner, regular shaped object. Add in all the variables in how you can move seats back and forth and reclined or folded forward and you get into some pretty heavy duty math.
May need to pull the spare and open up that much more space though if the trunk height is only 13".