Toyota TechStream Ver GTS_10.10.018 - Diagnostic Tools for FR-S/GT86/BRZ - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

el-guapin · 08-02-2018, 02:52 PM

Quote:

Originally Posted by nkobns

Does anyone know if there are some drivers to make the cable work with win10 32bits ?

Thanks !

Not sure about 32bit but there is a hack for the W10 64bit. That’s what I’m running. Search online you will find it.

misterfly · 08-02-2018, 03:09 PM

Quote:

Originally Posted by nkobns

Does anyone know if there are some drivers to make the cable work with win10 32bits ?

Thanks !

I have bought one cable with techstream 13 and it's work on win 10 64 and 32

ermax · 08-02-2018, 04:19 PM

Quote:

Originally Posted by nkobns

Does anyone know if there are some drivers to make the cable work with win10 32bits ?

Thanks !

Why do you need it to work on Win10-32? It's not hard to get it working in Win10-64. What cable do you have? I had a cheap Mini VCI cable and with some registry changes (moving some keys from \SOFTWARE to \SOFTWARE\WOW6432Node) it worked fine on Win10-64. Now I have a Tactrix and the installer for it's drivers put the registry entries in the correct place so you don't have to mess around to get it to work.

kiki2015 · 09-12-2018, 03:41 AM

Quote:

Originally Posted by misterfly

I have bought one cable with techstream 13 and it's work on win 10 64 and 32

Hello, where did you buy from? You mean VXDIAG NANO Toyota interface?

misterfly · 03-07-2019, 05:03 PM

Quote:

Originally Posted by kiki2015

Hello, where did you buy from? You mean VXDIAG NANO Toyota interface?

I bought it on amazon .com

it's a generic cable

Gunman · 03-13-2019, 12:09 PM

Is this the latest version "available"? looking to pick up a cable soon.

ermax · 03-13-2019, 12:19 PM

13.30.018 is the latest

Gunman · 03-13-2019, 04:16 PM

So, what's a good cable, since they are all clearly knockoffs from china?

ermax · 03-13-2019, 04:47 PM

Quote:

Originally Posted by Gunman

So, what's a good cable, since they are all clearly knockoffs from china?

I got a cheap one for $18 and it worked but later got a Tactrix because I wanted to be able to flash. If I did it all over I would skip right over the cheap one and go directly for a Tactrix.

https://www.tactrix.com/index.php?op...ed=1&Itemid=53

durtdonthurt · 03-19-2019, 12:18 AM

Quote:

Originally Posted by ermax

Why do you need it to work on Win10-32? It's not hard to get it working in Win10-64. What cable do you have? I had a cheap Mini VCI cable and with some registry changes (moving some keys from \SOFTWARE to \SOFTWARE\WOW6432Node) it worked fine on Win10-64. Now I have a Tactrix and the installer for it's drivers put the registry entries in the correct place so you don't have to mess around to get it to work.

I need some help....I am trying to get this to work on my 2018 BRZ and I have tried installing version 13.00.022 on both my windows 10 x64 and windows 7 x64 using this method and continue to get the error code: "unable to connect to VIM"

I am using this cable and it is firmware ver. 1.4.1. When I run the Xhorse firmware update tool, I get the status as "connected"

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

When you say "moving some keys from \SOFTWARE to \SOFTWARE\WOW6432Node) it worked fine on Win10-64" What exactly are you doing with this? I made sure the registry file matched the one that was in the guide I was following, added it to the desktop and "merged" it successfully.

Thanks!!

ermax · 03-25-2019, 12:48 PM

Quote:

Originally Posted by ermax

13.30.018 is the latest

14.00.019 is the latest now.

You can always see what the latest version is by going here:
https://techinfo.toyota.com/techInfo..._features.html

xkenx1995 · 07-15-2019, 11:40 PM

Any mirror links for the drivers and software? It seems dead.

Windycity · 09-08-2022, 09:13 PM

I have an ECU that has no VIN associated to it. I bought a tune from Delicious Tune and now I can't use it because the car has no VIN in the ECU.. Can I use Techstream to put a VIN on the ECU??

HotRodPA · 07-08-2023, 03:08 PM

Quote:

Originally Posted by Windycity

I have an ECU that has no VIN associated to it. I bought a tune from Delicious Tune and now I can't use it because the car has no VIN in the ECU.. Can I use Techstream to put a VIN on the ECU??

My old Delicious tune had no vin attached to it, so I'm having this exact issue, how did you resolve it?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPMS Tools	developer	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	27	10-04-2021 01:28 PM
anyone with a shop or tools	Tylub	Southern California	0	05-14-2013 11:03 AM
Tools?	Gost	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	35	04-03-2013 03:46 PM
Tools for DIY maintenance?	F1point4	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	19	08-08-2012 07:47 PM

03-13-2019, 12:19 PM	#217
ermax Senior Member Join Date: Sep 2017 Drives: 2022 BRZ Limited Silver Location: Jacksonville, FL Posts: 2,532 Thanks: 882 Thanked 2,045 Times in 1,188 Posts Mentioned: 68 Post(s) Tagged: 0 Thread(s)	13.30.018 is the latest

07-15-2019, 11:40 PM	#222
xkenx1995 Member Join Date: Jun 2015 Drives: 2013 Subaru BRZ Location: California Posts: 43 Thanks: 8 Thanked 8 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Any mirror links for the drivers and software? It seems dead.

09-08-2022, 09:13 PM	#223
Windycity Member Join Date: Apr 2016 Drives: 2013 Scion frs Location: Chicago Posts: 55 Thanks: 1 Thanked 9 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I have an ECU that has no VIN associated to it. I bought a tune from Delicious Tune and now I can't use it because the car has no VIN in the ECU.. Can I use Techstream to put a VIN on the ECU??

User Name		Remember Me?
Password