FS: JE 13.5:1 pistons used 200 miles - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ft86me · 07-06-2017, 07:46 PM

I'm selling my used JE 13.5:1 pistons that I had in my motor before having it rebuilt again for about 200 miles. I had these for a turbo build. You can use them for NA also. Nothing is wrong with them. I had them inspected by outfront Motorsports to make sure they are in great condition. Slight scratches from cleaning the carbon off, but no damage.

P/N for these are 315121
86.5 bore.
.50 oversize
86 stroke mm
129.3 rod mm
39 head CCs
2.0 dome CC
V footnote
FSR skirt

I would highly advise you order new rings.
These comes with all 4 piston pins but need one extra piston pin collar. Most are in the pistons except for three and missing one. You can replace all piston pin collars if you like but I was told everything here is good.

I am asking $250 and I will ship them to you for that price. I have seen these anywhere in the range from 530-600. If you have an offer you would like to make , ask away.

Sent from my iPhone using Tapatalk

ADebelius · 07-06-2017, 10:29 PM

Holy crap, 13.5 CR on a turbo build? How'd that go?

These sound like they would be bad ass for a NA build. GLWS

ft86me · 07-06-2017, 10:31 PM

Well, if it wasn't for the builder messing up the heads and providing possibly a bad motor , it was nice when things were good. The low end was really nice. Spooled up really quick. I couldn't push it though since I was on break in.

Thanks !

Sent from my iPhone using Tapatalk

elitegunslinger · 07-07-2017, 12:47 AM

Wait so super high compression and high boost? Did you use E100? What magical unicorn power was this chooching?

ft86me · 07-07-2017, 12:55 AM

Quote:

Originally Posted by elitegunslinger

Wait so super high compression and high boost? Did you use E100? What magical unicorn power was this chooching?

E85 and a magical tuner. 91 is also possible. Just gotta have someone with the right skills

Sent from my iPhone using Tapatalk

ft86me · 07-08-2017, 04:25 PM

Bump

Sent from my iPhone using Tapatalk

ft86me · 07-13-2017, 02:00 AM

bump

ft86me · 07-15-2017, 11:01 AM

reduced pricing

ft86me · 07-23-2017, 10:58 AM

bump

07-06-2017, 07:46 PM	#1
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	FS: JE 13.5:1 pistons used 200 miles I'm selling my used JE 13.5:1 pistons that I had in my motor before having it rebuilt again for about 200 miles. I had these for a turbo build. You can use them for NA also. Nothing is wrong with them. I had them inspected by outfront Motorsports to make sure they are in great condition. Slight scratches from cleaning the carbon off, but no damage. P/N for these are 315121 86.5 bore. .50 oversize 86 stroke mm 129.3 rod mm 39 head CCs 2.0 dome CC V footnote FSR skirt I would highly advise you order new rings. These comes with all 4 piston pins but need one extra piston pin collar. Most are in the pistons except for three and missing one. You can replace all piston pin collars if you like but I was told everything here is good. I am asking $250 and I will ship them to you for that price. I have seen these anywhere in the range from 530-600. If you have an offer you would like to make , ask away. Sent from my iPhone using Tapatalk Last edited by ft86me; 07-14-2017 at 08:32 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RR racing BBK - 4 pistons	Lorico	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	9	01-31-2017 02:55 AM
Ej25 pistons?	ChandlerSwyng	Other Vehicles & General Automotive Discussions	2	06-19-2014 01:46 PM
13.5:1 Pistons	woode	Forced Induction	13	04-27-2014 11:06 PM
CP Pistons for FA20	MattR	Engine, Exhaust, Transmission	1	10-04-2012 07:22 PM

07-06-2017, 10:29 PM	#2
ADebelius Taking Corners Join Date: Nov 2012 Drives: 2014 FR-S Whiteout Monogram Location: New Mexico Posts: 33 Thanks: 0 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Holy crap, 13.5 CR on a turbo build? How'd that go? These sound like they would be bad ass for a NA build. GLWS

07-06-2017, 10:31 PM	#3
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	Well, if it wasn't for the builder messing up the heads and providing possibly a bad motor , it was nice when things were good. The low end was really nice. Spooled up really quick. I couldn't push it though since I was on break in. Thanks ! Sent from my iPhone using Tapatalk

07-07-2017, 12:47 AM	#4
elitegunslinger Senior Member Join Date: Oct 2016 Drives: 2014 BRZ Limited Location: NJ Posts: 120 Thanks: 10 Thanked 24 Times in 22 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Wait so super high compression and high boost? Did you use E100? What magical unicorn power was this chooching?

07-08-2017, 04:25 PM	#6
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	Bump Sent from my iPhone using Tapatalk

07-13-2017, 02:00 AM	#7
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	bump

07-15-2017, 11:01 AM	#8
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	reduced pricing

07-23-2017, 10:58 AM	#9
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	bump

User Name		Remember Me?
Password