Weederr's Series.Yellowbird tS - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

spike021 · 10-11-2017, 06:14 PM

Quote:

Originally Posted by weederr33

I think it's amazing! About the same weight as oem so no light knob or heavy. But I like the partial leather topping. I have a baby sock I use to protect it from the heat and cold too. It does raise the height by a mm or two, though...

That sounds pretty nice! Where'd you buy it from?

weederr33 · 10-11-2017, 07:06 PM

Quote:

Originally Posted by spike021

That sounds pretty nice! Where'd you buy it from?

I found it on japanparts.com. It's a bit pricy though

weederr33 · 10-23-2017, 10:44 PM

Shift knob cover and STI push button start

weederr33 · 11-25-2017, 08:34 PM

Soon...

weederr33 · 12-01-2017, 03:37 PM

SubiSpeed intake sound/ resonator delete kit!

iLuveKetchup · 12-01-2017, 04:16 PM

Nice! That is my favorite knob for the Subaru. I have it for my GD STi and couldn't be happier.

weederr33 · 12-31-2017, 03:45 PM

Got the exhaust installed yesterday/ today (sorry no cool pictures since I was too busy and it was balls cold by Texas standards). Spent today checking for leaks. I will point out that the mating between the Cosworth/ Nameless header and the JDL overpipe/ frontpipe combo is a bit difficult. Also found the whole V-band clamps strange. I do need to adjust the overpipe portion up slightly as it's hitting the sub frame. As well, the donut gasket that came with the combo pipe is... well odd. I also suspect a leak from it but I have the bolts tight as can be. Drove the car around a total of 30 miles and didn't throw a CEL, so I'll see if one appears in the coming days.

Tuned the car via ECUTEK with the Cosworth Stage 1.3 tune that I requested from @Matt@Cosworth. I'll get some logs to make sure all is well once I have more free time and it's slightly warmer.

nikitopo · 01-01-2018, 06:56 AM

Happy New Year!

Sorry to hear that you had fitting issues. Keep us posted and if you see any considerable differences on top end in comparison to the '+17 stock header and stock tune.

weederr33 · 01-01-2018, 01:59 PM

Quote:

Originally Posted by nikitopo

Happy New Year!

Sorry to hear that you had fitting issues. Keep us posted and if you see any considerable differences on top end in comparison to the '+17 stock header and stock tune.

I plan on adjusting it later this week when it warms up a little bit. Shouldn't be too hard of an issue to fix!

kuczynskika · 01-01-2018, 02:55 PM

Quote:

Originally Posted by weederr33

Got the exhaust installed yesterday/ today (sorry no cool pictures since I was too busy and it was balls cold by Texas standards). Spent today checking for leaks. I will point out that the mating between the Cosworth/ Nameless header and the JDL overpipe/ frontpipe combo is a bit difficult. Also found the whole V-band clamps strange. I do need to adjust the overpipe portion up slightly as it's hitting the sub frame. As well, the donut gasket that came with the combo pipe is... well odd. I also suspect a leak from it but I have the bolts tight as can be. Drove the car around a total of 30 miles and didn't throw a CEL, so I'll see if one appears in the coming days.

Tuned the car via ECUTEK with the Cosworth Stage 1.3 tune that I requested from @Matt@Cosworth. I'll get some logs to make sure all is well once I have more free time and it's slightly warmer.

Ya know... as time goes on all I seem to hear and experience myself and from others are problems with the nameless/Cosworth components when it comes to welds and fitment issues. Really is a shame.

Things seem to be coming along for the build tho!

weederr33 · 01-01-2018, 03:37 PM

Quote:

Originally Posted by kuczynskika

Ya know... as time goes on all I seem to hear and experience myself and from others are problems with the nameless/Cosworth components when it comes to welds and fitment issues. Really is a shame.

Things seem to be coming along for the build tho!

Outside the header, I cannot comment on the exhaust. I figured Nameless made quality parts so I'm not sure what the whole issue was with them. But I did like the Nameless headers I had on my FRS so I wanted to get them again so that I could take advantage of the Cosworth stage 1 set up.

kuczynskika · 01-01-2018, 04:12 PM

Quote:

Originally Posted by weederr33

Outside the header, I cannot comment on the exhaust. I figured Nameless made quality parts so I'm not sure what the whole issue was with them. But I did like the Nameless headers I had on my FRS so I wanted to get them again so that I could take advantage of the Cosworth stage 1 set up.

Ah man did you buy new again? Didn't save those from the old car?

weederr33 · 01-01-2018, 04:22 PM

Quote:

Originally Posted by kuczynskika

Ah man did you buy new again? Didn't save those from the old car?

I left the headers on my FRS (like a moron) when I traded it in but found someone on the forums who was selling the proper Cosworth manifold for a reasonable price.

kuczynskika · 01-01-2018, 04:23 PM

Quote:

Originally Posted by weederr33

I left the headers on my FRS (like a moron) when I traded it in but found someone on the forums who was selling the proper Cosworth manifold for a reasonable price.

Well there ya go!

10-23-2017, 10:44 PM	#31
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,325 Thanks: 4,528 Thanked 5,586 Times in 2,928 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Shift knob cover and STI push button start __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

11-25-2017, 08:34 PM	#32
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,325 Thanks: 4,528 Thanked 5,586 Times in 2,928 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Soon... __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

12-01-2017, 03:37 PM	#33
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,325 Thanks: 4,528 Thanked 5,586 Times in 2,928 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	SubiSpeed intake sound/ resonator delete kit! __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

12-31-2017, 03:45 PM	#35
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,325 Thanks: 4,528 Thanked 5,586 Times in 2,928 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Got the exhaust installed yesterday/ today (sorry no cool pictures since I was too busy and it was balls cold by Texas standards). Spent today checking for leaks. I will point out that the mating between the Cosworth/ Nameless header and the JDL overpipe/ frontpipe combo is a bit difficult. Also found the whole V-band clamps strange. I do need to adjust the overpipe portion up slightly as it's hitting the sub frame. As well, the donut gasket that came with the combo pipe is... well odd. I also suspect a leak from it but I have the bolts tight as can be. Drove the car around a total of 30 miles and didn't throw a CEL, so I'll see if one appears in the coming days. Tuned the car via ECUTEK with the Cosworth Stage 1.3 tune that I requested from @Matt@Cosworth. I'll get some logs to make sure all is well once I have more free time and it's slightly warmer. __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Weederr's Cosworth Supercharged Raven	weederr33	Member's Car Journals	232	03-25-2024 10:09 PM
FS: DRL Mod for Monogram/10-Series/Release Series 1.0	leoh007	Audio/Visual, Electronics, Infotainment, NAV	0	05-12-2015 12:14 PM
10 Series / Series.Blue rear view mirror	86-ADL	Cosmetic Modification (Interior/Exterior/Lighting)	4	11-16-2014 07:32 PM
BRZ series.blue/FRS Series 1.0 photos	Johnny	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	08-25-2014 11:23 PM

12-01-2017, 04:16 PM	#34
iLuveKetchup My VTEC fluid is full Join Date: Jan 2012 Drives: EFF JAY Location: NYC Posts: 935 Thanks: 149 Thanked 268 Times in 183 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Nice! That is my favorite knob for the Subaru. I have it for my GD STi and couldn't be happier.

01-01-2018, 06:56 AM	#36
nikitopo Senior Member Join Date: Mar 2014 Drives: '15 BRZ RA Location: Greece Posts: 3,787 Thanks: 2,416 Thanked 1,944 Times in 1,261 Posts Mentioned: 29 Post(s) Tagged: 0 Thread(s)	Happy New Year! Sorry to hear that you had fitting issues. Keep us posted and if you see any considerable differences on top end in comparison to the '+17 stock header and stock tune.

User Name		Remember Me?
Password