Drift-Office : BRZ vs FRS Dyno Day ~ Mini Meet 6/30/12 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Drift-Office · 05-23-2012, 03:19 AM

Date : 30th June 2012
Time : 1PM - Whenever?
Location : Drift-Office, LLC | 1535 Auburn Way North, Auburn, WA 98002

So I was thinking it would be a good opportunity for us here in the NW to have a get together and what better way is there than to have a meet-n-greet event over a dyno session? Besides, there will be a free flow of NOS Energy drinks on site.

It would also be a good time for a few of us to baseline our vehicles and see if there's any appreciable differences between the FR-Ss and the BRZs performance wise.

Dyno sessions are FREE for the 3 other participants :

1) BRZ 6AT ~ OPEN!!!
2) BRZ 6MT ~ OPEN!!! / WastaCamel (Tentative)
3) FRS 6AT ~ CNC Joel Staab (Confirmed)
4) FRS 6MT ~ DO virtual_bob (Confirmed)

The BRZ 6MT / 6AT spots are still open so if you're interested, LMK ASAP and I'll pen you in!

All vehicles attending above need to be 100% stock, engine and wheel wise - this way we get an apples to apples comparison. 6MT vehicles will go WOT in 5th gear while 6ATs will do so in 4th. (That's the 1:1 gear) Naturally, we'll do a run or two with the 4th and 3rd gears respectively too!

Naturally, there's going to be at least 2 non-stock BRZs and 1 FRS on stat...

BRZ AT : mechaghost (Confirmed)
BRZ MT : Tainen (Confirmed)
FRS MT : detainu (Confirmed)

There's a certain PRINT MEDIA guy on site coming too to cover what could be THE FIRST BRZ / FRS Dyno Day here in the US...

That said, who's down to come by and check this out?

Regards,

DeepHunta · 05-23-2012, 10:31 AM

I'm a noob when it comes to dyno requirements. I could fill in the BRZ 6MT but what is the maxium revs needed for a proper dyno read? I am hearing that I shouldn't redline the BRZ until after 1,000 miles driven.

Sport-Tech · 05-23-2012, 11:39 AM

Quote:

Originally Posted by DeepHunta

I'm a noob when it comes to dyno requirements. I could fill in the BRZ 6MT but what is the maxium revs needed for a proper dyno read? I am hearing that I shouldn't redline the BRZ until after 1,000 miles driven.

What the hell, go for it. Just be sure to capture the data before your engine grenades so you can post it here! Inquiring minds want to know!

Drift-Office · 05-23-2012, 02:18 PM

Quote:

Originally Posted by DeepHunta

I'm a noob when it comes to dyno requirements. I could fill in the BRZ 6MT but what is the maxium revs needed for a proper dyno read?

Well, we are doing WOT (Wide Open Throttle) pulls, so it will be straight to rev limit. Typical dyno run... I know there are 2 trains of thought, one where you baby it and the other where you go all out - and consider this : if this brand new car can't go WOT without hurting itself, maybe we should not even be considering it's purchase.

Besides, that's the other reason why I made it on the 16th, so people would have had some time to 'break' there motor in (pun half-intended!)

Cheers!

DeepHunta · 05-23-2012, 03:25 PM

I see. Very tempting. I just re-checked my calendar and looks like I almost double booked myself. Sorry but can't fill the 6MT spot.

MarkRacerX · 05-24-2012, 07:01 PM

Sounds like a fun lil' meet. I will be over to the West side for Forum Fest following wknd.

Get pics of event !!

Be curious to see what MT vs AT put down.

Drift-Office · 05-24-2012, 09:10 PM

Quote:

Originally Posted by MarkRacerX

Sounds like a fun lil' meet. I will be over to the West side for Forum Fest following wknd.

Come by and say hi, I run the drift portion of FF. Don't be surprised to see my ride there!

Cheers!

Drift-Office · 05-24-2012, 11:44 PM

Anyone know of a STOCK 6MT BRZ that can come do the baseline?

Cheers!

Jordo! · 05-25-2012, 12:05 AM

What kind of dyno?

Everyone be sure to get SAE correction.

Looking forward to the results

mechaghost · 05-30-2012, 04:26 PM

I just hit 1k today so I can definitely do a WOT

ESBjiujitsu · 05-30-2012, 05:45 PM

this meet will have so much WIN!!! wish i could be there

DCT223 · 06-05-2012, 04:09 PM

doh.. ill be out of town when this happens

Drift-Office · 06-06-2012, 08:12 PM

So how many of you guys are coming?

Tainen · 06-07-2012, 02:32 PM

I am.

05-23-2012, 03:19 AM	#1
Drift-Office Senior Member Join Date: May 2012 Drives: AE86 / FRS / FC3S / GC8 / S14 / R32 Location: Auburn, WA Posts: 789 Thanks: 633 Thanked 1,431 Times in 372 Posts Mentioned: 169 Post(s) Tagged: 2 Thread(s)	Drift-Office : BRZ vs FRS Dyno Day ~ Mini Meet 6/30/12 Date : 30th June 2012 Time : 1PM - Whenever? Location : Drift-Office, LLC \| 1535 Auburn Way North, Auburn, WA 98002 So I was thinking it would be a good opportunity for us here in the NW to have a get together and what better way is there than to have a meet-n-greet event over a dyno session? Besides, there will be a free flow of NOS Energy drinks on site. It would also be a good time for a few of us to baseline our vehicles and see if there's any appreciable differences between the FR-Ss and the BRZs performance wise. Dyno sessions are FREE for the 3 other participants : 1) BRZ 6AT ~ OPEN!!! 2) BRZ 6MT ~ OPEN!!! / WastaCamel (Tentative) 3) FRS 6AT ~ CNC Joel Staab (Confirmed) 4) FRS 6MT ~ DO virtual_bob (Confirmed) The BRZ 6MT / 6AT spots are still open so if you're interested, LMK ASAP and I'll pen you in! All vehicles attending above need to be 100% stock, engine and wheel wise - this way we get an apples to apples comparison. 6MT vehicles will go WOT in 5th gear while 6ATs will do so in 4th. (That's the 1:1 gear) Naturally, we'll do a run or two with the 4th and 3rd gears respectively too! Naturally, there's going to be at least 2 non-stock BRZs and 1 FRS on stat... BRZ AT : mechaghost (Confirmed) BRZ MT : Tainen (Confirmed) FRS MT : detainu (Confirmed) There's a certain PRINT MEDIA guy on site coming too to cover what could be THE FIRST BRZ / FRS Dyno Day here in the US... That said, who's down to come by and check this out? Regards, Last edited by Drift-Office; 06-27-2012 at 02:38 AM. Reason: Continually Updating...

05-23-2012, 10:31 AM	#2
DeepHunta Senior Member Join Date: Mar 2012 Drives: '05 Outback Wgn, '05 Lotus Elise Location: WA Posts: 543 Thanks: 21 Thanked 99 Times in 67 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	I'm a noob when it comes to dyno requirements. I could fill in the BRZ 6MT but what is the maxium revs needed for a proper dyno read? I am hearing that I shouldn't redline the BRZ until after 1,000 miles driven. __________________ Proud ex-owner of GBS 6MT BRZ Limited. Pre-ordered on Feb-29-2012, got VIN on 5/19 with ETA 6/6, arrived early on 6/2, but still didn't pick it up until Jun-6-2012. Recently sold the Buuurz as of 4/21/2014

05-23-2012, 03:25 PM	#5
DeepHunta Senior Member Join Date: Mar 2012 Drives: '05 Outback Wgn, '05 Lotus Elise Location: WA Posts: 543 Thanks: 21 Thanked 99 Times in 67 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	I see. Very tempting. I just re-checked my calendar and looks like I almost double booked myself. Sorry but can't fill the 6MT spot. __________________ Proud ex-owner of GBS 6MT BRZ Limited. Pre-ordered on Feb-29-2012, got VIN on 5/19 with ETA 6/6, arrived early on 6/2, but still didn't pick it up until Jun-6-2012. Recently sold the Buuurz as of 4/21/2014

05-24-2012, 07:01 PM	#6
MarkRacerX Senior Member Join Date: Jan 2012 Drives: 12' Evo X , prior 1st 86 FR-S Location: Spokane, WA Posts: 545 Thanks: 697 Thanked 176 Times in 72 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Sounds like a fun lil' meet. I will be over to the West side for Forum Fest following wknd. Get pics of event !! Be curious to see what MT vs AT put down. __________________ Autocross & Drift = my Anti Drug!! I have Car A.D.D prior few: 12' Evo GSR, 13' FR-S, 11' STi, 08' 135i, 07' 335Xi, 08' STi, 04' 350Z, 04' STi, 02' WRX. 96' GSR, 04' SE-R/SpecV

06-05-2012, 04:09 PM	#12
DCT223 Member Join Date: May 2012 Drives: S14, ZN6 Location: CA/WA Posts: 33 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 2 Post(s) Tagged: 0 Thread(s)	doh.. ill be out of town when this happens __________________ 1995 S14, 2013 ZN6

05-24-2012, 11:44 PM	#8
Drift-Office Senior Member Join Date: May 2012 Drives: AE86 / FRS / FC3S / GC8 / S14 / R32 Location: Auburn, WA Posts: 789 Thanks: 633 Thanked 1,431 Times in 372 Posts Mentioned: 169 Post(s) Tagged: 2 Thread(s)	Anyone know of a STOCK 6MT BRZ that can come do the baseline? Cheers!

05-25-2012, 12:05 AM	#9
Jordo! Enjoy it, destroy it. Join Date: Oct 2009 Drives: Datsun Racing Hen Location: Blank Generation Posts: 820 Thanks: 6 Thanked 61 Times in 48 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	What kind of dyno? Everyone be sure to get SAE correction. Looking forward to the results

05-30-2012, 04:26 PM	#10
mechaghost Senior Member Join Date: May 2012 Drives: Silver AT Limited Location: Seattle Posts: 823 Thanks: 145 Thanked 344 Times in 159 Posts Mentioned: 17 Post(s) Tagged: 0 Thread(s)	I just hit 1k today so I can definitely do a WOT

06-06-2012, 08:12 PM	#13
Drift-Office Senior Member Join Date: May 2012 Drives: AE86 / FRS / FC3S / GC8 / S14 / R32 Location: Auburn, WA Posts: 789 Thanks: 633 Thanked 1,431 Times in 372 Posts Mentioned: 169 Post(s) Tagged: 2 Thread(s)	So how many of you guys are coming?

06-07-2012, 02:32 PM	#14
Tainen Senior Member Join Date: Nov 2011 Drives: First SWP BRZ-L Location: Washington Posts: 809 Thanks: 154 Thanked 350 Times in 174 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	I am. __________________ First white BRZ in the country Limited SWP BRZ, 35% tint, clear bra, Nameless Performance downpipe, axelback, headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NW Shop Review: Drift Office (Auburn WA)	DarrenDriven	Northwest	20	12-30-2017 07:18 PM
Marin Mini Meet 6/20	86_ZN6	Southern California	4	07-12-2012 02:31 AM
It's here!! I just walked out of my office...	Indestruct	BRZ First-Gen (2012+) -- General Topics	13	06-01-2012 01:32 AM
Video: HKS 86 drift car + first 86/FR-S/BRZ dyno = 170 rwhp!!!	madfast	Scion FR-S / Toyota 86 GT86 General Forum	301	03-26-2012 05:22 AM
My office is almost complete	Laika	Off-Topic Lounge [WARNING: NO POLITICS]	22	06-27-2011 11:09 PM

User Name		Remember Me?
Password