Inexpensive Exhaust! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Squido3J · 03-09-2014, 05:51 AM

What do you guys think?
My Scion FRS 2014 Top Speed Pro-1 Dual Catback Exhaust System
Sounds great,great price and a perfect fit. Welding is excellent aswell

This 400$ Top Speed cat back system for the frs/brz was the best bang for the buck I've ever spent on an exhaust. The fitment was spot on! Hardware was all included. Even the flanges were ported. The welds were top notch.

Install was as simple as it gets. Put it up on race ramps, spray wd-40 on the rubber bushings to get them out, unbolt old exhaust, install new exhaust. It took about 10 minutes.
Thank You h4nh and top speed pro!

Exhaust Link:
http://www.ebay.com/itm/Scion-FRS-Su...e5a991&vxp=mtr

[ame="https://www.youtube.com/watch?v=-Ie5dtPGtCo"]Scion FRS Top Speed Auto Race Cat Exhaust - YouTube[/ame]

Muskokan · 03-09-2014, 06:30 AM

I think it sounds too positive for a $400 catback, let's see the welds, and is there any drone at all?

Squido3J · 03-09-2014, 06:33 AM

Quote:

Originally Posted by Muskokan

I think it sounds too positive for a $400 catback, let's see the welds, and is there any drone at all?

http://www.ft86club.com/forums/showt...31#post1392331

Would take a picture of them but already on my car..and nope! I mean unless you really tolerant to sound.

subiestyle · 03-09-2014, 01:46 PM

im ocd with this stuff.

but the exhaust tips don't lineup with the cutoffs.

Squido3J · 03-09-2014, 02:43 PM

Quote:

Originally Posted by subiestyle

im ocd with this stuff.

but the exhaust tips don't lineup with the cutoffs.

That was my fault. Just need to adjust them

Sent from my SCH-I535 using Tapatalk

woode · 03-09-2014, 02:47 PM

Quote:

Originally Posted by subiestyle

im ocd with this stuff.

but the exhaust tips don't lineup with the cutoffs.

That is what I immediately noticed as well. I would fix that or return the exhaust if it were me.

Sounds good though. How are the welds and bends? Weight?

Squido3J · 03-09-2014, 02:53 PM

Quote:

Originally Posted by woode

That is what I immediately noticed as well. I would fix that or return the exhaust if it were me.

Sounds good though. How are the welds and bends? Weight?

Yeah It fit perfectly fine. I just didn't align the rubber hangings correctly. Meant to get that fixed but haven't had time yet. I'll keep you guys updated :]
Overall good cat.

Name: uploadfromtaptalk1394391109845.jpg
Views: 1697
Size: 34.5 KB

Name: uploadfromtaptalk1394391109845.jpg
Views: 1697
Size: 34.5 KB

Name: uploadfromtaptalk1394391120586.jpg
Views: 1763
Size: 36.4 KB

Name: uploadfromtaptalk1394391130046.jpg
Views: 1766
Size: 50.1 KB

Name: uploadfromtaptalk1394391155935.jpg
Views: 1776
Size: 44.8 KB

Sent from my SCH-I535 using Tapatalk

raven1231 · 03-09-2014, 02:58 PM

Quote:

Originally Posted by Squido3J

What do you guys think?
My Scion FRS 2014 Top Speed Pro-1 Dual Catback Exhaust System
Sounds great,great price and a perfect fit. Welding is excellent aswell

This 400$ Top Speed cat back system for the frs/brz was the best bang for the buck I've ever spent on an exhaust. The fitment was spot on! Hardware was all included. Even the flanges were ported. The welds were top notch.

Install was as simple as it gets. Put it up on race ramps, spray wd-40 on the rubber bushings to get them out, unbolt old exhaust, install new exhaust. It took about 10 minutes.
Thank You h4nh and top speed pro!

Exhaust Link:
http://www.ebay.com/itm/Scion-FRS-Su...e5a991&vxp=mtr

I'm getting a Top Speed as well....Nothing wrong with saving $300-$900

Squido3J · 03-09-2014, 02:59 PM

Quote:

Originally Posted by raven1231

I'm getting a Top Speed as well....Nothing wrong with saving $300-$900

Nothing wrong with saving couple bucks brotha :]
Keep me posted whenever you install yours!

Sent from my SCH-I535 using Tapatalk

raven1231 · 03-09-2014, 03:00 PM

Quote:

Originally Posted by Squido3J

Nothing wrong with saving couple bucks brotha :]
Keep me posted whenever you install yours!

Sent from my SCH-I535 using Tapatalk

Will do! I should be installing all my mods this upcoming week! I am mobile again lol

h4nh · 03-09-2014, 03:42 PM

Quote:

Originally Posted by subiestyle

im ocd with this stuff.

but the exhaust tips don't lineup with the cutoffs.

Quote:

Originally Posted by woode

That is what I immediately noticed as well. I would fix that or return the exhaust if it were me.

Sounds good though. How are the welds and bends? Weight?

It aligns fine. It just needs to set in with the hangers. 5000 miles on it so far with no issues. I even took it out to the track and it holds up fine.

boredom.is.me · 03-09-2014, 03:46 PM

It sounds goo, but the tips are too close together. I'm with the other OCD posters.

86-tundra · 03-09-2014, 04:12 PM

he'll be able to adjust them into position with the right hangers.

jamesm · 03-09-2014, 04:17 PM

The thing to know about these 'cheap' exhaust is that they all use small piping, usually 60mm. Fine for any NA application, but you'll be buying twice if you decide to go FI in the future.

03-09-2014, 04:12 PM	#13
86-tundra Troll Hunter Join Date: Aug 2013 Drives: fr-s, tundra Location: Somewhere Posts: 1,424 Thanks: 1,695 Thanked 922 Times in 470 Posts Mentioned: 39 Post(s) Tagged: 0 Thread(s)	he'll be able to adjust them into position with the right hangers. __________________ DIY Winjet Retrofit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inexpensive shocks dyno'd...	CSG Mike	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	60	03-09-2014 06:59 PM
Inexpensive lip+skirts+spats?	mike_ekim1024	Cosmetic Modification (Interior/Exterior/Lighting)	5	03-07-2013 01:05 PM
Inexpensive suggestion for better sound??	ngabdala	Electronics \| Audio \| NAV \| Infotainment	28	08-24-2012 12:05 PM
Inexpensive spare wheel	Captain Snooze	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	07-05-2012 06:36 AM
I'm afraid the FT86 might be too inexpensive.	BRZrkr	Scion FR-S / Toyota 86 GT86 General Forum	30	02-24-2010 02:45 PM

03-09-2014, 06:30 AM	#2
Muskokan Senior Member Join Date: Aug 2013 Drives: white Sport-tech Location: Ontario Posts: 676 Thanks: 204 Thanked 320 Times in 149 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	I think it sounds too positive for a $400 catback, let's see the welds, and is there any drone at all?

03-09-2014, 01:46 PM	#4
subiestyle Senior Member Join Date: Feb 2014 Drives: 2014 Monogram FR-S White MT Location: San Francisco Posts: 433 Thanks: 62 Thanked 106 Times in 68 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	im ocd with this stuff. but the exhaust tips don't lineup with the cutoffs.

03-09-2014, 04:17 PM	#14
jamesm Banned Join Date: Mar 2013 Drives: 2013 FR-S Location: Orlando, FL Posts: 2,929 Thanks: 1,166 Thanked 2,293 Times in 1,180 Posts Mentioned: 313 Post(s) Tagged: 4 Thread(s)	The thing to know about these 'cheap' exhaust is that they all use small piping, usually 60mm. Fine for any NA application, but you'll be buying twice if you decide to go FI in the future.

User Name		Remember Me?
Password