Drambeenie Risers MEGATHREAD. - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Drambeenie · 05-10-2017, 08:47 AM

FT86SpeedFactory are now selling the Drambeenie Risers!! Check it out!

http://www.ft86speedfactory.com/dram...17-86-brz.html

_______

ORIGINAL POST

I removed my spoiler but the green pop clips didn't come along with it. I tried pushing in the sides but it's difficult because the other flap is inside of the trunk. This spoiler is different than the prior years.

Thoughts? First image is inside of the trunk opened, second is ontop of the trunk. Black oval is a decal I put to cover the hole.

Summerwolf · 05-10-2017, 09:35 AM

You selling the 2017 spoilerr?

Gunman · 05-10-2017, 11:44 AM

Looks like you pinch the clip on the inside, and push it out of the car.

8RZ · 05-10-2017, 11:47 AM

Yeah try using a flathead to push in the tabs and remove the clip.

Drambeenie · 05-10-2017, 12:33 PM

Quote:

Originally Posted by Summerwolf

You sellibg the 2017 spoilerr?

No, I'm disassembling the spoiler - Going to 3D print larger pylons so that the wing sits higher.

Quote:

Originally Posted by Gunman

Looks like you pinch the clip on the inside, and push it out of the car.

Quote:

Originally Posted by 8RZ

Yeah try using a flathead to push in the tabs and remove the clip.

Ok I just tried that. Half of the clip seems like it's coming out but there's another tab on the underside of the green piece that I can't reach due to the trunk hole size and clip placement. Suggestions?

8RZ · 05-10-2017, 12:34 PM

Quote:

Originally Posted by Drambeenie

Ok I just tried that. Half of the clip seems like it's coming out but there's another tab on the underside of the green piece that I can't reach due to the hole opening size and clip placement. Suggestions?

Can you twist the cap so the other tab faces you?

Drambeenie · 05-10-2017, 01:05 PM

Quote:

Originally Posted by 8RZ

Can you twist the cap so the other tab faces you?

Unfortunately I can't. The clips are rectangular and require both flaps (or pins) to be pushed in to be removed.

I'll try using my pic tool and see if it'll get to the underside and fit.

trippinbillies40 · 05-10-2017, 01:17 PM

Quote:

Originally Posted by Drambeenie

Unfortunately I can't. The clips are rectangular and require both flaps (or pins) to be pushed in to be removed.

I'll try using my pic tool and see if it'll get to the underside and fit.

Pic tool was going to be my suggestion.

Also, subscribed for pics of finished product. If it looks good, there could be a market for it

Drambeenie · 05-10-2017, 01:25 PM

Quote:

Originally Posted by trippinbillies40

Pic tool was going to be my suggestion.

Also, subscribed for pics of finished product. If it looks good, there could be a market for it

Will do! I'm also excited to make it and see what the finished higher spoiler looks like.

Summerwolf · 05-10-2017, 03:08 PM

Quote:

Originally Posted by Drambeenie

No, I'm disassembling the spoiler - Going to 3D print larger pylons so that the wing sits higher.

Oh. That sounds.....interesting.

tacos · 05-10-2017, 03:33 PM

Quote:

Originally Posted by Drambeenie

No, I'm disassembling the spoiler - Going to 3D print larger pylons so that the wing sits higher.

!!!!!!! ive been thinking about how someone should do this since i got the car, i cant wait to see how it looks

spike021 · 05-10-2017, 05:25 PM

Quote:

Originally Posted by Drambeenie

No, I'm disassembling the spoiler - Going to 3D print larger pylons so that the wing sits higher.

Will whatever you print be durable enough to be back there?

Drambeenie · 05-10-2017, 06:22 PM

Quote:

Originally Posted by spike021

Will whatever you print be durable enough to be back there?

Yes. We're going to be using industrial 3D printers. This isn't a HomeKit 3D printer. There are many 3D printing processes and machines and materials. We'll test the parts thoroughly and build it for structural considerations. Given the amount of wind resistance that can be generated at high speeds, we'll be very thorough.

My cousin is a robotics engineer so we're going to make sure it's structurally sound, sturdy, durable and most importantly safe!

Gunman · 05-10-2017, 06:27 PM

Needle nose pliers won't fit up in there?

05-10-2017, 08:47 AM	#1
Drambeenie Senior Member Join Date: Oct 2016 Drives: Black 17 BRZ LT MT PP Location: NYC Posts: 470 Thanks: 499 Thanked 518 Times in 202 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Drambeenie Risers MEGATHREAD. FT86SpeedFactory are now selling the Drambeenie Risers!! Check it out! http://www.ft86speedfactory.com/dram...17-86-brz.html _______ ORIGINAL POST I removed my spoiler but the green pop clips didn't come along with it. I tried pushing in the sides but it's difficult because the other flap is inside of the trunk. This spoiler is different than the prior years. Thoughts? First image is inside of the trunk opened, second is ontop of the trunk. Black oval is a decal I put to cover the hole. Last edited by Drambeenie; 05-17-2018 at 05:59 AM.

05-10-2017, 09:35 AM	#2
Summerwolf Panda Trueno Join Date: Jan 2015 Drives: No twin now. Location: North Indiana Posts: 3,347 Thanks: 2,113 Thanked 2,407 Times in 1,332 Posts Mentioned: 17 Post(s) Tagged: 2 Thread(s)	You selling the 2017 spoilerr? Last edited by Summerwolf; 10-19-2017 at 03:15 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remove trunk spoiler clips?	Drambeenie	Member's Car Journals	0	05-09-2017 11:31 PM
2017 BRZ Limited Spoiler	Chayce808	Cosmetic Modification (Interior/Exterior/Lighting)	6	01-04-2017 12:49 AM
2017 BRZ without spoiler?	vroomvroom1	BRZ First-Gen (2012+) -- General Topics	9	07-18-2016 10:46 AM
Remove spoiler for Rocket Bunny one?	xrinnenganx	Cosmetic Modification (Interior/Exterior/Lighting)	7	10-21-2014 10:28 AM
Is there a way to remove the spoiler?	rapier7	BRZ First-Gen (2012+) -- General Topics	15	08-21-2013 10:58 PM

User Name		Remember Me?
Password