Will this fit? (width, offset and tire size Qs) - Page 267 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Leonardo · 03-17-2018, 12:50 PM

Quote:

Originally Posted by carlovestela

Do i still need camber bolt?

Yes.

carlovestela · 03-22-2018, 02:29 PM

How about lca to adjust rear to -1 camber?

Quote:

Originally Posted by Leonardo

Yes.

Leonardo · 03-22-2018, 02:38 PM

Quote:

Originally Posted by carlovestela

How about lca to adjust rear to -1 camber?

I have lowered my car on Eibach Prokit springs (TRD Springs). I have -2 of natural rear camber and even tire wear.

Unless you have money to burn for LCA, they are not necessary for your setup.

Tristor · 03-26-2018, 12:34 AM

I was originally planning to get a second set of aftermarket wheels this summer so I could have separate tires for street and track and just shelve my stock wheels since they won't fit my BBK directly. It looks like I may need to do some other mods first, but I still want to get my tire situation sorted.

Does anyone know what size of spacer I need to run in order to fit an AP Sprint Kit BBK w/ the stock wheels?

churchx · 03-26-2018, 01:31 AM

First hit on googling for "site:ft86club.com essex sprint stock wheels spacer"

RainEG · 03-27-2018, 02:12 AM

i have a question that I bet everyone asks and answered, but I got 17x9 +45 wheels and don't have enough money to buy tires yet. What or will I have clearance issues if I use the stock tires? Do I need at least 3mm spacers or even more? I will be getting 245/40 in the near future. I'm just dying to slap on these wheels. Thank you for your time.

JustSomeGuy · 03-27-2018, 11:06 AM

Quote:

Originally Posted by RainEG

i have a question that I bet everyone asks and answered, but I got 17x9 +45 wheels and don't have enough money to buy tires yet. What or will I have clearance issues if I use the stock tires? Do I need at least 3mm spacers or even more? I will be getting 245/40 in the near future. I'm just dying to slap on these wheels. Thank you for your time.

im no expert buuttt youre gonna have a hard time with stock 215 tires on a 9" wheel, it may be doable but it will be quite stretched

if youre going that wheel size, save for proper tires

http://www.ft86club.com/forums/showthread.php?t=13824
http://www.ft86club.com/forums/showthread.php?t=103171
http://www.ft86club.com/forums/showthread.php?t=56309
http://www.ft86club.com/forums/showthread.php?t=92314

Leonardo · 03-27-2018, 12:27 PM

Quote:

Originally Posted by RainEG

i have a question that I bet everyone asks and answered, but I got 17x9 +45 wheels and don't have enough money to buy tires yet. What or will I have clearance issues if I use the stock tires? Do I need at least 3mm spacers or even more? I will be getting 245/40 in the near future. I'm just dying to slap on these wheels. Thank you for your time.

Read through this thread. It has info on the clearance of a 17x9+45

http://www.ft86club.com/forums/showthread.php?t=48453

Stock tires on 17x9 wheels. This has been done lots of times in your situation.

RiPS2K · 03-28-2018, 04:01 PM

will 18x9.5 +45 on 235/40 potenza all season rub the oem suspension?

ItsLomain · 04-04-2018, 11:30 AM

Ok guys so I just got some Motegi mr127s (18x8 +32). I plan on getting some eibach sportline lowering springs. Would I end up rubbing if I get these springs?

Leonardo · 04-04-2018, 03:55 PM

Quote:

Originally Posted by ItsLomain

Ok guys so I just got some Motegi mr127s (18x8 +32). I plan on getting some eibach sportline lowering springs. Would I end up rubbing if I get these springs?

No rub with 225/40/18's

FRarriS · 04-07-2018, 04:20 PM

What wheels are those

Quote:

Originally Posted by Leonardo

Read through this thread. It has info on the clearance of a 17x9+45

http://www.ft86club.com/forums/showthread.php?t=48453

Stock tires on 17x9 wheels. This has been done lots of times in your situation.

Leonardo · 04-07-2018, 09:03 PM

Quote:

Originally Posted by FRarriS

What wheels are those

17x9 Nissan Skyline wheels + adapters

Renegade · 04-09-2018, 06:36 PM

18x9 +33 lowered on BC Coilovers, no other supporting mods. How bad/much poke would this be?

03-27-2018, 02:12 AM	#3730
RainEG MTXclusive Join Date: Oct 2012 Drives: 2017 Toyota 86 Location: Las Vegas Posts: 43 Thanks: 2 Thanked 18 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i have a question that I bet everyone asks and answered, but I got 17x9 +45 wheels and don't have enough money to buy tires yet. What or will I have clearance issues if I use the stock tires? Do I need at least 3mm spacers or even more? I will be getting 245/40 in the near future. I'm just dying to slap on these wheels. Thank you for your time. __________________ 2017 Toyota 86 l Progress/Build/Update Thread

03-28-2018, 04:01 PM	#3733
RiPS2K Junior Member Join Date: Sep 2014 Drives: WRB BRZ Series.Blue Location: El Monte ca Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	18x9.5 +45 on oem suspension will 18x9.5 +45 on 235/40 potenza all season rub the oem suspension?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Determining the proper width size of the tire	CyberFormula	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	49	05-23-2014 09:11 AM
Correct tire width for each wheel width	DarrenDriven	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	10	08-16-2012 02:03 PM
TIRE SIZE CALCULATOR	White64Goat	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	6	08-15-2012 02:31 AM
Tire Width vs Wheel Width	Synack	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	40	08-12-2012 11:21 PM

03-26-2018, 01:31 AM	#3729
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,333 Thanks: 696 Thanked 2,085 Times in 1,436 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	First hit on googling for "site:ft86club.com essex sprint stock wheels spacer"

04-04-2018, 11:30 AM	#3734
ItsLomain Junior Member Join Date: Mar 2018 Drives: Asphalt Scion FR-S Location: Dallas, Tx Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Ok guys so I just got some Motegi mr127s (18x8 +32). I plan on getting some eibach sportline lowering springs. Would I end up rubbing if I get these springs?

04-09-2018, 06:36 PM	#3738
Renegade Junior Member Join Date: Sep 2017 Drives: Asphalt 2015 FR-S Location: Hawaii Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	18x9 +33 lowered on BC Coilovers, no other supporting mods. How bad/much poke would this be?

User Name		Remember Me?
Password