Will a 2017 86 TRD exhaust fit on a 2013 FRS - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ABGHUNTER_86 · 09-21-2019, 03:04 AM

Ok this is a dumb question but I’m new to owning these cars. As the title says I was wondering if a TRD Exhaust from a 2017 86 will fit on a 2013 FRS. I tried looking for answers but got nothing, and I know both the cars are mostly the same but also saw that there were some revisions to the 2017 and up 86’s in regards to headers and some parts of the exhausts. Also it’s not the quad tip trd exhaust.

Tcoat · 09-21-2019, 09:20 AM

Quote:

Originally Posted by ABGHUNTER_86

Ok this is a dumb question but I’m new to owning these cars. As the title says I was wondering if a TRD Exhaust from a 2017 86 will fit on a 2013 FRS. I tried looking for answers but got nothing, and I know both the cars are mostly the same but also saw that there were some revisions to the 2017 and up 86’s in regards to headers and some parts of the exhausts. Also it’s not the quad tip trd exhaust.

The bolts at the header flange are spaced a bit differently. People managed to get them to work by widening the holes a bit.

DarkPira7e · 09-21-2019, 10:25 AM

If you bolt on from the catback position it will fit perfectly. I have a 2017 stock catback for my 2013 and it fits without issue.

ABGHUNTER_86 · 09-21-2019, 12:08 PM

Awesome thanks for the answers, I initially thought that the whole exhaust system was revised but it was just the headers that were revised so that makes me relieved.

nikitopo · 09-21-2019, 01:19 PM

Quote:

Originally Posted by Tcoat

The bolts at the header flange are spaced a bit differently. People managed to get them to work by widening the holes a bit.

This is the fist time to hear this. I have the revised exhaust manifold (header) and when I installed it in the shop they didn't tell me anything about fitting issues.

@ABGHUNTER_86 Is this TRD exhaust an axleback or a catback? If it is a catback, then you won't have any fitting issues.

mrg666 · 09-21-2019, 01:22 PM

Quote:

Originally Posted by Tcoat

The bolts at the header flange are spaced a bit differently. People managed to get them to work by widening the holes a bit.

I installed a 2019 MT header on my 2014 AT without any issue using the stock 2014 overpipe. There was no hole adjustment needed.

Tcoat · 09-21-2019, 01:29 PM

Quote:

Originally Posted by nikitopo

This is the fist time to hear this. I have the revised exhaust manifold (header) and when I installed it in the shop they didn't tell me anything about fitting issues.

@ABGHUNTER_86 Is this TRD exhaust an axleback or a catback? If it is a catback, then you won't have any fitting issues.

Quote:

Originally Posted by mrg666

I installed a 2019 MT header on my 2014 AT without any issue using the stock 2014 overpipe. There was no hole adjustment needed.

There are several threads on this. I personally have not done it but there are enough guys to have the issue to say it is there.

Clutch Dog · 09-21-2019, 01:54 PM

17 muffler that needs narrowing to fit 13-16 mid pipe

had to take a grind off wheel and slot the muffler tos it would accept the wider 17 bolt pattern or the narrower 13-16 bolts

ABGHUNTER_86 · 09-21-2019, 03:16 PM

@nikitopo Correct the trd exhaust I’m bout to purchase is a catback, to be more descriptive it’s the oval type tips.

09-21-2019, 03:04 AM	#1
ABGHUNTER_86 Junior Member Join Date: Sep 2018 Drives: White Scion Frs Location: VA Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Will a 2017 86 TRD exhaust fit on a 2013 FRS Ok this is a dumb question but I’m new to owning these cars. As the title says I was wondering if a TRD Exhaust from a 2017 86 will fit on a 2013 FRS. I tried looking for answers but got nothing, and I know both the cars are mostly the same but also saw that there were some revisions to the 2017 and up 86’s in regards to headers and some parts of the exhausts. Also it’s not the quad tip trd exhaust. Last edited by ABGHUNTER_86; 09-21-2019 at 03:52 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SRS modules - two 2017 and one 2013	FT86Logic	Interior Parts (Incl. Lighting)	4	05-08-2022 02:31 PM
2013 vs 2017	pkolanko	BRZ First-Gen (2012+) -- General Topics	1	10-04-2017 11:52 PM
2013 vs 2017	pkolanko	BRZ First-Gen (2012+) -- General Topics	0	10-04-2017 11:11 PM
2013 FRs vs 2017 WRX	Weasel Soup	FR-S / BRZ vs....	19	08-02-2017 07:49 PM
Beatrush Catless Equal Length Exhaust Manifold Subaru BRZ 2013-2015 / Scion FR-S 2013	RallySport Direct	Engine, Exhaust, Bolt-Ons	21	06-03-2015 02:21 PM

09-21-2019, 10:25 AM	#3
DarkPira7e Rust bucket enthusiast Join Date: Feb 2017 Drives: 2013 Turbo Firestorm FRS Location: Vermont Posts: 3,933 Thanks: 3,200 Thanked 4,095 Times in 2,045 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	If you bolt on from the catback position it will fit perfectly. I have a 2017 stock catback for my 2013 and it fits without issue.

09-21-2019, 12:08 PM	#4
ABGHUNTER_86 Junior Member Join Date: Sep 2018 Drives: White Scion Frs Location: VA Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Awesome thanks for the answers, I initially thought that the whole exhaust system was revised but it was just the headers that were revised so that makes me relieved.

09-21-2019, 01:54 PM	#8
Clutch Dog Senior Member Join Date: Jan 2019 Drives: 2017 BRZ PP , 2005 Saab 97X Location: CA Posts: 1,052 Thanks: 754 Thanked 721 Times in 405 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	17 muffler that needs narrowing to fit 13-16 mid pipe had to take a grind off wheel and slot the muffler tos it would accept the wider 17 bolt pattern or the narrower 13-16 bolts

09-21-2019, 03:16 PM	#9
ABGHUNTER_86 Junior Member Join Date: Sep 2018 Drives: White Scion Frs Location: VA Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	@nikitopo Correct the trd exhaust I’m bout to purchase is a catback, to be more descriptive it’s the oval type tips.

User Name		Remember Me?
Password