What you HATE the most on your FR-S/BRZ/GT86/FT86?

[RustySocket]

Originally Posted by Impureclient

Try this: Amazon.com: Mario & Luigi Design Multi Use Auto Car seat belt cover Plush Seat Shoulder Pad Cushion 2 pcs One Pair: Automotive

Picked up those and got some new driving shoes as well

[ame="http://www.amazon.com/Adult-Super-MARIO-LUIGI-Slipper/dp/B004FD0FM6/ref=pd_sim_236_2?ie=UTF8&refRID=0F92MZ7TTDT7CWJG43 Q7"]Amazon.com : (Adult) Super MARIO & LUIGI Plush Slipper One Size Fits All for Adult Feet up to 11" : Everything Else[/ame]

[Impureclient]

Might as well get the whole package, Rustysocket: http://www.tvstoreonline.com/costume...endo-costumes/

[Uplink]

Originally Posted by Impureclient

Might as well get the whole package, Rustysocket: http://www.tvstoreonline.com/costume...endo-costumes/

Guys, you're missing the most important mod for the car's lack of power to level the playing field: [ame="http://www.amazon.com/Little-Buddy-Super-Mario-Pillow/dp/B00YQLJ8NO/"]www.amazon.com[/ame]

[SisterBlue22]

Originally Posted by Uplink

Guys, you're missing the most important mod for the car's lack of power to level the playing field: www.amazon.com

That's what you toss out the back to take out the tailgaters!!!

[Kana]

shaking!

[Tcoat]

Originally Posted by Kana

shaking!

Shaking? What kind of shaking?

[Sapphireho]

The way the rear hatch and side mirrors hold about a gallon of water after you wash it.

everthing else I didn't like I believe I have fixed.

[Tcoat]

Originally Posted by Sapphireho

The way the rear hatch and side mirrors hold about a gallon of water after you wash it.

everthing else I didn't like I believe I have fixed.

I have to believe there is some sort of reservoir in those things that lets a carefully controlled stream of water run down the side of the car for hours.
Hell, it doesn't even have to be clean water!

[Doubletap]

Probably already been said in a 200+ page topic, but I hate that they made the stock wheels a 2-tone color. Either make it all silver, or all gun metal gray. The BRZ series blue got it right with all black.

[Packofcrows]

Originally Posted by Sapphireho

The way the rear hatch and side mirrors hold about a gallon of water after you wash it.

everthing else I didn't like I believe I have fixed.

haha my problem right here!

[user4815]

I hate(d) the factory reverse lockout.

For one it felt like it came off a 1998 Pontiac Grand Am or some other GM garbage from that era. Secondly it ended up rattling like crazy. I put the Raceseng lockout on and problem solved.

[Ultramaroon]

Originally Posted by Kana

shaking!

Originally Posted by Tcoat

Shaking? What kind of shaking?

This! ^^^

Welcome to the forum, Kana. Now learn to be more descriptive in your original posts! Sheesh!

[Tokay444]

The other people who own them.

[notout86]

Originally Posted by Sapphireho

The way the rear hatch and side mirrors hold about a gallon of water after you wash it.

everthing else I didn't like I believe I have fixed.

I solved the rear hatch problem by forming a black silicone rubber gasket to stop water getting in.
Clean and put masking tape on the body around where the plastic bit with the number plate lights touches, removing the plastic bit , clean the plastic surfaces that touch the metal with alcohol, clean the body/paint where the plastic touches, put a very light smear of petroleum jelly on the body, put masking tape all around the plastic as far as the edge that touches, put a bead of silicone rubber around the edge of the plastic. Re-attach the plastic lightly, ensuring it touches the jelly all round, and allow the silicone to cure.
The jelly stops the rubber sticking to the bodypaint so you can get the plastic off later if needed. Tighten up the plastic/rubber to the metal, peel off the masking tape, trim the rubber neatly taking care not to cut through the paint.

Do the same gasket thing around the number plate.

I also fixed in "window panes" of colorless clear plastic with silicone to stop water getting in via the light holes, and sealed around the key-hole. It is best to do that part while the plastic is off the car.