FR-S Release Series 1.0 Registry

[chanklins]

Hi!

#466 unit here in Washington DC metro area! purchased new on May/22/2015 and loving it!

These guys at the dealer did a disaster with the front plate, I already fixed it but I had to make a new hole :/

[Datcrazyeric]

#1157 was purchased last night to a Mr. Hernandez. Very happy owner

[shadoken]

Originally Posted by dylannguyener

Yes exactly what Auror said.

Sometimes it just cant be avoided .... Any rubber or plastic cover we can install in the bottom?

Well it honestly doesnt matter since nobody is even going to look under the front lip. But Sometimes those scratches come up to the front too.

[Slowmotion]

Originally Posted by shadoken

Sometimes it just cant be avoided .... Any rubber or plastic cover we can install in the bottom?

Well it honestly doesnt matter since nobody is even going to look under the front lip. But Sometimes those scratches come up to the front too.

You could just get a splitter and have that take the grunt of being hit and save the paint. But as long as it's just scratched in the satin black section of the lip, there is no clear coat so just paint more satin black over it. I've hit mine a few times and that's what I'm planning to do once I have time.

[shadoken]

Originally Posted by Slowmotion

You could just get a splitter and have that take the grunt of being hit and save the paint.

Wouldnt that look a bit weird on the RS1.0?

I was thinking maybe sticking some kind of black vinyl or something , idk

[Slowmotion]

Originally Posted by shadoken

Wouldnt that look a bit weird on the RS1.0?

I was thinking maybe sticking some kind of black vinyl or something , idk

Maybe? I was thinking the opposite. After doing some snooping, I found this:


It is interesting, maybe not for everyone, but I want something more extreme.

Though, if that isn't an option, this is something that was made for the MKIV Jetta GLI's where the front lip sat extremely low.



If you made something like that (a template, laser cutter and a countersink bit is all you need) you could protect the lip while not having it take away from the look.

[shadoken]

Originally Posted by Slowmotion

Maybe? I was thinking the opposite. After doing some snooping, I found this:

It is interesting, maybe not for everyone, but I want something more extreme.

If you made something like that (a template, laser cutter and a countersink bit is all you need) you could protect the lip while not having it take away from the look.

oddly enough I just saw this thread. Is this what you are looking for?

Although I dont know how this might fit in the RS1.0 , the thing is our bumper never really gets scraped its the front lip. Mostly right underneath the fog lights.
http://www.ft86club.com/forums/showthread.php?t=89084

But it seems a bit pricey , I have no idea how much the RS1.0 front splitter alone costs. So it might not be worth the investment if its the same price to just replace the splitter entirely.

http://www.protektskidplates.com/buy-now.html

[Slowmotion]

Originally Posted by shadoken

oddly enough I just saw this thread. Is this what you are looking for?

Although I dont know how this might fit in the RS1.0 , the thing is our bumper never really gets scraped its the front lip. Mostly right underneath the fog lights.
http://www.ft86club.com/forums/showthread.php?t=89084

But it seems a bit pricey , I have no idea how much the RS1.0 front splitter alone costs. So it might not be worth the investment if its the same price to just replace the splitter entirely.

http://www.protektskidplates.com/buy-now.html

Haha, yup that is exactly what I was thinking. Though, I'm not sure how much protection you get with the strips that far back, though they may fit the RS1.0 because they are that far back.

Idk if anyone has looked up the price of the lip yet, but I can't imagine it'll be cheap being made for a limited quantity vehicle.

[Sky Hawk Texas]

[
Location unknown in Texas

[Tcoat]

Originally Posted by Sky Hawk Texas

[
Location unknown in Texas

SHHHH let's not spook them...
As you can see both parents share responsibilities in protecting the young. The bright colours of the new born will fade as it ages until it more closely matches the parents.

[TRD-X]

Originally Posted by Sky Hawk Texas

Location unknown in Texas

Awesome photo buddy..!!

[Fish]

Originally Posted by shadoken

oddly enough I just saw this thread. Is this what you are looking for?

Although I dont know how this might fit in the RS1.0 , the thing is our bumper never really gets scraped its the front lip. Mostly right underneath the fog lights.
http://www.ft86club.com/forums/showthread.php?t=89084

But it seems a bit pricey , I have no idea how much the RS1.0 front splitter alone costs. So it might not be worth the investment if its the same price to just replace the splitter entirely.

http://www.protektskidplates.com/buy-now.html

I was with @Moto-P a few months ago when were hanging out at Cusco and we test fit the Protekt skid plates on my RS. The plates did fit. However, they were about flush with the lip from what I remember so they didn't do too much.

[Reign]

1. Grazio&Co. Front Toyota Emblem - Matte Black
2. SuperTek 86 Logo Center Caps
3. Diode Dynamics FRS Fog Lights
4. Lamin-X Fog Light Covers - Yellow
5. OLM LED Interior Dome Light
6. Carsmo Armrest
7. Rho-plate V1 Tow Hook License Plate Mount
8. Broadway 270mm Flat Rear View Mirror
9. 86 Logo Steering Wheel Emblem - Matte Black
10. Yospeed Custom Center Console Plaque
11. Custom License Plate
12. Razo RA24 Onyx Aluminum Shift Knob 140g
13. Dota 2 TI4 Embroidered Logo
14. Fallout 3 Collector's Edition Vault Boy Bobblehead
15. LED License Plate Light
16. Clear Tuf Flat License Plate Shield





I'm liking how it looks with the rear debadged.

[Akrkwk310]

Nice RSs everyone
I just installed TRD intake and wrapped my TRD usa wheels with tires but havent put them on yet Will post pics once i do'