325 HP w/ Ptuning Turbo Kit & defective JDL header - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SON1C · 05-28-2016, 09:10 PM

Hey guys just wanted to share my results, which I am really happy with

I'll save the full story for my build thread . . so here is my car with the ptuning turbo kit & a defective JDL header that no matter what we could not get it to seal properly ( it has been two months and still waiting on the replacement from JDL. . it was supposed to be ready two weeks ago, and this week, fingers crossed for next week . . )

Performance mods include. . simply jdl uel header & full exhaust + bigger injectors + Ptuning 93 octane dyno tune.

Anyway check it out!

[ame="https://www.youtube.com/watch?v=uSiyHlGwlFk"]325 HP Turbo Subaru BRZ Dyno Pull @ PTuning - Virginia - YouTube[/ame]

Dyno sheet

Subaru BRZ Ptuning turbo kit 325 hp dyno sheet by Drew Elias, on Flickr

COO86L · 05-29-2016, 08:09 AM

The ptuning kit is probably my favourite of the turbo kits. Makes amazing torque. Shame it isn't available for RHD :'(

GsxrMe · 05-29-2016, 09:23 AM

I gotta asked. How much boost are you running?

SON1C · 05-29-2016, 09:59 AM

Quote:

Originally Posted by COO86L

The ptuning kit is probably my favourite of the turbo kits. Makes amazing torque. Shame it isn't available for RHD :'(

I imagine with enough interest they would make a RHD version? Perhaps its worth shooting them an email?

Quote:

Originally Posted by GsxrMe

I gotta asked. How much boost are you running?

How much boost would you guess?

Northwest86 · 05-29-2016, 10:20 AM

Quote:

Originally Posted by COO86L

The ptuning kit is probably my favourite of the turbo kits. Makes amazing torque. Shame it isn't available for RHD :'(

There are much better options but I think we've already talked about that. A shame really.

SON1C · 05-29-2016, 01:36 PM

Quote:

Originally Posted by Northwest86

There are much better options but I think we've already talked about that. A shame really.

what would you recommend and why just out of curiosity?

GsxrMe · 05-29-2016, 03:39 PM

Quote:

Originally Posted by SON1C

I imagine with enough interest they would make a RHD version? Perhaps its worth shooting them an email?

How much boost would you guess?

9? With good tune?

SON1C · 05-29-2016, 07:08 PM

Quote:

Originally Posted by GsxrMe

9? With good tune?

10.5 on ptunings dyno tune

GsxrMe · 05-29-2016, 10:20 PM

Are you running an oil cooler? Catchcans? Underwood shoot please!

SON1C · 05-30-2016, 08:22 AM

Quote:

Originally Posted by GsxrMe

Are you running an oil cooler? Catchcans? Underwood shoot please!

I have the ptuning oil cooler and a dual catch can setup + bigger mishimoto radiator setup . . . still need to install them

will update you when it's done

Brzzee · 05-30-2016, 09:42 AM

What size and manufacturer of your bigger fuel injectors?

Nice build, like the blue tubes matching the car color.

Northwest86 · 05-30-2016, 10:17 AM

Quote:

Originally Posted by SON1C

what would you recommend and why just out of curiosity?

The Coyoda Turbo kit. The most efficient and no corners cut. Difficult to get outside of Australia at this point. One of the few/only kits I've seen that can handle track abuse without massive upgrades to cooling/much worse throttle response. Nothing can compete on throttle response apart from a JRSC.

COO86L · 05-30-2016, 02:14 PM

Quote:

Originally Posted by Northwest86

There are much better options but I think we've already talked about that. A shame really.

I'd love to meet up one day and go for a drive in yours, just so you can prove me wrong

haha.

Quote:

Originally Posted by SON1C

I imagine with enough interest they would make a RHD version? Perhaps its worth shooting them an email?

I already have my forced induction at this stage but this kit was a major consideration until I read "at this time this isn't available for RHD vehicles" somewhere deep in the FAQs.
I just love how what I've seen of it, it reaalllyyy comes on but there is lag. Happy fun time at 4k RPM

Calum · 05-30-2016, 02:47 PM

Quote:

Originally Posted by Northwest86

The Coyoda Turbo kit. The most efficient and no corners cut. Difficult to get outside of Australia at this point. One of the few/only kits I've seen that can handle track abuse without massive upgrades to cooling/much worse throttle response. Nothing can compete on throttle response apart from a JRSC.

Any chance you could share a little more info, a web site for the company or a retailer even?

05-28-2016, 09:10 PM	#1
SON1C Senior Member Join Date: Feb 2015 Drives: 2015 Series Blue BRZ WRB Location: Northern Virginia Posts: 129 Thanks: 0 Thanked 53 Times in 27 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	325 HP w/ Ptuning Turbo Kit & defective JDL header Hey guys just wanted to share my results, which I am really happy with I'll save the full story for my build thread . . so here is my car with the ptuning turbo kit & a defective JDL header that no matter what we could not get it to seal properly ( it has been two months and still waiting on the replacement from JDL. . it was supposed to be ready two weeks ago, and this week, fingers crossed for next week . . ) Performance mods include. . simply jdl uel header & full exhaust + bigger injectors + Ptuning 93 octane dyno tune. Anyway check it out! [ame="https://www.youtube.com/watch?v=uSiyHlGwlFk"]325 HP Turbo Subaru BRZ Dyno Pull @ PTuning - Virginia - YouTube[/ame] Dyno sheet Subaru BRZ Ptuning turbo kit 325 hp dyno sheet by Drew Elias, on Flickr

05-29-2016, 09:23 AM	#3
GsxrMe Senior Member Join Date: Jul 2015 Drives: Late 2014 Subaru BRZ Location: Cape Coral, FL Posts: 557 Thanks: 20 Thanked 183 Times in 139 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	I gotta asked. How much boost are you running? __________________ 2014 Subaru BRZ FBM Turbokit: GTX3076R - ECUTEK HRI FlexFuel tune - FBM 3" Turboback Exhaust - 550cc Injectors - Walbro 485 Fuel Pump - 4bar Map Sensor - FBM Oil Pan - ACT SB7-XTSS - AMSOIL all fluids - Forester XT Oil Cooler - Cusco engine, trans mounts - Whiteline rear differential bushings - Perrin shifter bushing - Firehawk 235/45/17 - AEM Failsafe

05-29-2016, 10:20 PM	#9
GsxrMe Senior Member Join Date: Jul 2015 Drives: Late 2014 Subaru BRZ Location: Cape Coral, FL Posts: 557 Thanks: 20 Thanked 183 Times in 139 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	Are you running an oil cooler? Catchcans? Underwood shoot please! __________________ 2014 Subaru BRZ FBM Turbokit: GTX3076R - ECUTEK HRI FlexFuel tune - FBM 3" Turboback Exhaust - 550cc Injectors - Walbro 485 Fuel Pump - 4bar Map Sensor - FBM Oil Pan - ACT SB7-XTSS - AMSOIL all fluids - Forester XT Oil Cooler - Cusco engine, trans mounts - Whiteline rear differential bushings - Perrin shifter bushing - Firehawk 235/45/17 - AEM Failsafe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: PTuning turbo kit	smacdon	Engine, Exhaust, Bolt-Ons	19	07-22-2015 09:53 AM
Sold - Ptuning EL Header	Andrew025	Engine, Exhaust, Bolt-Ons	9	03-13-2015 11:34 PM
PTuning 4-1 header	xwd	Want-To-Buy Requests	0	11-26-2014 02:44 PM
PTUNING: 501WHP 377WTQ 20psi Stock Motor PTUNING Spec-SS GTX3076R Turbo System	ptuning	Forced Induction	47	06-16-2014 03:52 PM

05-29-2016, 08:09 AM	#2
COO86L Senior Member Join Date: Dec 2015 Drives: 2015 86 GTS + Mitsi Lancer GSR Location: Lismore AUS Posts: 215 Thanks: 127 Thanked 93 Times in 68 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	The ptuning kit is probably my favourite of the turbo kits. Makes amazing torque. Shame it isn't available for RHD :'(

05-30-2016, 09:42 AM	#11
Brzzee Senior Member Join Date: Feb 2013 Drives: 2015 Subaru BRZ WRBP Limited 6MT. Location: Dallas, TX Posts: 441 Thanks: 271 Thanked 108 Times in 88 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	What size and manufacturer of your bigger fuel injectors? Nice build, like the blue tubes matching the car color.

User Name		Remember Me?
Password