Front Camber Bolts option - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

hanabie · 11-07-2013, 04:23 PM

Does anyone know the part number for OEM camber bolts?

What's the maximum setting? What other good options beside OEM camber bolts?

Thank you much

Fizz · 11-07-2013, 08:59 PM

OEM upper camber bolt: SU003-02805

Another option is Whiteline upper camber bolt: KCA416 (or SPC 81280)

I believe both would give you approx -1.3 or thereabouts?

solidONE · 11-07-2013, 11:18 PM

SPC 81280 and/or 81260. I run both.

hanabie · 11-08-2013, 01:27 AM

two bolts per side or just one bolt? thanks

solidONE · 11-08-2013, 04:07 PM

Quote:

Originally Posted by hanabie

two bolts per side or just one bolt? thanks

Both sets. 2 on each side. 4 bolts replaced total.

hanabie · 11-08-2013, 09:27 PM

Quote:

Originally Posted by solidONE

Both sets. 2 on each side. 4 bolts replaced total.

Why running both? I thought lower hole gives more neg camber per manual statement. Are you looking for more camber? How many neg camber can u get? Thanks. Spc bolts apparently are significantly cheaper than whiteline.

Sent from my SGH-T999 using Tapatalk

solidONE · 11-08-2013, 10:42 PM

Quote:

Originally Posted by hanabie

Why running both? I thought lower hole gives more neg camber per manual statement. Are you looking for more camber? How many neg camber can u get? Thanks. Spc bolts apparently are significantly cheaper than whiteline.

Sent from my SGH-T999 using Tapatalk

Whiteline bolts are reboxed SPC bolts. They will have SPC logo cast into the bolt heads. Yes I was looking for as close to -3* of camber as I could without camber plates. I got -2.6* with the bolts. Although if you had to pick one to use the upper 16mm bolts would be a safer bet as they are a thicker diameter thus stronger. Also, my 81280 SPC bolts were zinc coated as well. Some that got the whiteline bolts did not have zinc plating and reported corrosion.

hanabie · 11-09-2013, 10:27 PM

I got the silver ones from amazon. Looks like those are the new ones.

Sent from my SGH-T999 using Tapatalk

whataboutbob · 11-10-2013, 12:28 AM

Whiteline ones gave me -1 3/8.

11-07-2013, 04:23 PM	#1
hanabie Senior Member Join Date: Feb 2012 Drives: WRB LMTD '13 Location: Phillips Ranch Posts: 1,246 Thanks: 184 Thanked 242 Times in 158 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Front Camber Bolts option Does anyone know the part number for OEM camber bolts? What's the maximum setting? What other good options beside OEM camber bolts? Thank you much Last edited by hanabie; 11-07-2013 at 05:44 PM.

11-07-2013, 08:59 PM	#2
Fizz Senior Addict Join Date: Jan 2013 Drives: 86 GT Location: Perth, Australia Posts: 1,217 Thanks: 249 Thanked 336 Times in 215 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	OEM upper camber bolt: SU003-02805 Another option is Whiteline upper camber bolt: KCA416 (or SPC 81280) I believe both would give you approx -1.3 or thereabouts? Last edited by Fizz; 11-07-2013 at 10:41 PM.

11-07-2013, 11:18 PM	#3
solidONE Senior Member Join Date: Dec 2012 Drives: FR-S Whiteout Location: California Posts: 2,863 Thanks: 1,808 Thanked 790 Times in 611 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	SPC 81280 and/or 81260. I run both. __________________ Intent > Content cowardice is the mother of cruelty.

11-09-2013, 10:27 PM	#8
hanabie Senior Member Join Date: Feb 2012 Drives: WRB LMTD '13 Location: Phillips Ranch Posts: 1,246 Thanks: 184 Thanked 242 Times in 158 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I got the silver ones from amazon. Looks like those are the new ones. Sent from my SGH-T999 using Tapatalk __________________ My BRZ's Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Softening coils.	Chen	Northwest	3	10-29-2013 03:36 PM
Anyone running HSD coils??	PB-GT86	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	2	09-01-2013 10:21 AM
Used set of BC coils for sale	Astra^EC	AFRICA	0	08-22-2013 09:55 AM
Need help picking coils	WolfsFang	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	23	03-11-2013 09:31 PM
Coils vs Coilovers	trish07	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	9	08-17-2012 10:41 AM

11-08-2013, 01:27 AM	#4
hanabie Senior Member Join Date: Feb 2012 Drives: WRB LMTD '13 Location: Phillips Ranch Posts: 1,246 Thanks: 184 Thanked 242 Times in 158 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	two bolts per side or just one bolt? thanks

User Name		Remember Me?
Password