Dead RB25 Swap, Alive 2jz swap - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

-Phil · 12-02-2017, 09:46 AM

Quote:

Originally Posted by Zer0

I have my old Vorshlag plate if you want it pm me. It's brand new I made my own to move my master cylinder. Over 3 inches closer to the brake master cylinder so I won't be using it.

Absolutely shoot me a pm!

all4spl · 12-02-2017, 11:42 AM

Quote:

Originally Posted by Zer0

I have my old Vorshlag plate if you want it pm me. It's brand new I made my own to move my master cylinder. Over 3 inches closer to the brake master cylinder so I won't be using it.

If he doesn't take it, I could really use this.

Zer0 · 12-07-2017, 03:35 PM

Quote:

Originally Posted by -Phil

Absolutely shoot me a pm!

Sent you a PM

Greg555 · 12-27-2017, 11:45 AM

Quote:

Originally Posted by -Phil

We will be using haltech engine management which shaves off quite a bit of cost over the motec.
Mind you we will still have can bus with the haltech. I will be able to go into more detail on overall costs later in the process.

can you tell me some more? I was not aware there were other options

Greg

-Phil · 02-07-2018, 04:47 PM

If anyone was interested in the MRS Box / Cable it is for sale as I have gone in a different direction. Hopefully i will update the thread in a couple of days with new information on the changes I've made and where we are at.

Mrs box is 200 take it off my hands

-Phil · 02-21-2018, 05:09 PM

Welp Unfortunately I will be giving up on this swap in particular, Spearheading these swaps is always a pain and unfortunately on the electronic side of things i have taken too many losses to move forward. Instead I will be Moving forward with a Swap kit from @PureAutomotive featuring their cd009 swap kit/products they offer for these swaps. I will Update you guys more as things happen.

Zer0 · 02-21-2018, 08:16 PM

Sorry to hear that. I love the RB was looking forward to hearing it run. Thanks for letting us know about your new direction.

Harey · 02-25-2018, 09:30 PM

Quote:

Originally Posted by OmarGC

Took the time to make it as equal as possible, why not go divided?

Divided is good for response and mid range but sacrifices top end.

-Phil · 03-12-2018, 12:23 PM

Small update from Pure, Motor is in the car. Everything is mocked up. Getting all the good stuff. Going with a stock bottom end and a fully built head.

Pure Automotive · 04-10-2018, 12:58 PM

Engine Bae

IMG_4992 by Brady Johnson, on Flickr

IMG_4932 by Brady Johnson, on Flickr

Clash0901 · 04-11-2018, 09:06 AM

Can somebody do me a favor? Measure from the head where the intake manifold bolts up, to the abs module?

I would greatly appreciate it. This will help me prepare by knowing if my intake manifold will fit.

spitfire481 · 04-11-2018, 01:10 PM

Quote:

Originally Posted by Clash0901

Can somebody do me a favor? Measure from the head where the intake manifold bolts up, to the abs module?

I would greatly appreciate it. This will help me prepare by knowing if my intake manifold will fit.

12.5"

Clash0901 · 04-11-2018, 02:22 PM

Quote:

Originally Posted by spitfire481

12.5"

Looks like way more in the picture lol. My intake mani is 12" long so it's gonna be damn close, but should fit like a glove!

Thank you!!

Pure Automotive · 04-11-2018, 02:37 PM

Quote:

Originally Posted by Clash0901

Can somebody do me a favor? Measure from the head where the intake manifold bolts up, to the abs module?

I would greatly appreciate it. This will help me prepare by knowing if my intake manifold will fit.

Your problem won't be there, it will be does it clear the boost and clutch master cylinder, I haven't found another that does, that's why we ended up making our own.

02-07-2018, 04:47 PM	#61
-Phil Senior Member Join Date: Nov 2015 Drives: Rb25 neo brz Location: NJ Posts: 210 Thanks: 129 Thanked 292 Times in 98 Posts Mentioned: 16 Post(s) Tagged: 5 Thread(s)	If anyone was interested in the MRS Box / Cable it is for sale as I have gone in a different direction. Hopefully i will update the thread in a couple of days with new information on the changes I've made and where we are at. Mrs box is 200 take it off my hands Last edited by -Phil; 02-26-2018 at 01:08 PM.

04-11-2018, 09:06 AM	#67
Clash0901 2 ugga dugga's Join Date: Nov 2017 Drives: Nike Location: Detroit Posts: 230 Thanks: 56 Thanked 189 Times in 106 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	Can somebody do me a favor? Measure from the head where the intake manifold bolts up, to the abs module? I would greatly appreciate it. This will help me prepare by knowing if my intake manifold will fit. __________________ Want to 2JZ swap your 86? Click here first!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pentosin Trans Fluid Swap \| Motul 300 Diff Swap \| Impressions	Dezoris	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	15	06-06-2017 10:54 PM
Ls or 2jz swap?	sgoldberg01	BRZ First-Gen (2012+) -- General Topics	13	03-22-2016 03:07 PM
Rod Swap	protpibe	Engine, Exhaust, Transmission	6	10-21-2015 11:38 PM
LED swap	Skorov	AUSTRALIA	28	09-23-2014 09:46 PM
Ej Swap	koyv90	Engine Swaps	50	11-14-2013 07:59 PM

02-21-2018, 05:09 PM	#62
-Phil Senior Member Join Date: Nov 2015 Drives: Rb25 neo brz Location: NJ Posts: 210 Thanks: 129 Thanked 292 Times in 98 Posts Mentioned: 16 Post(s) Tagged: 5 Thread(s)	Welp Unfortunately I will be giving up on this swap in particular, Spearheading these swaps is always a pain and unfortunately on the electronic side of things i have taken too many losses to move forward. Instead I will be Moving forward with a Swap kit from @PureAutomotive featuring their cd009 swap kit/products they offer for these swaps. I will Update you guys more as things happen.

02-21-2018, 08:16 PM	#63
Zer0 Senior Member Join Date: Sep 2015 Drives: 2015 frs Location: Ca Posts: 511 Thanks: 426 Thanked 196 Times in 148 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Sorry to hear that. I love the RB was looking forward to hearing it run. Thanks for letting us know about your new direction.

03-12-2018, 12:23 PM	#65
-Phil Senior Member Join Date: Nov 2015 Drives: Rb25 neo brz Location: NJ Posts: 210 Thanks: 129 Thanked 292 Times in 98 Posts Mentioned: 16 Post(s) Tagged: 5 Thread(s)	Small update from Pure, Motor is in the car. Everything is mocked up. Getting all the good stuff. Going with a stock bottom end and a fully built head.

04-10-2018, 12:58 PM	#66
Pure Automotive Join Date: Nov 2012 Drives: 2013 FRS Whiteout Location: Millersville, MD Posts: 2,035 Thanks: 735 Thanked 1,952 Times in 650 Posts Mentioned: 147 Post(s) Tagged: 0 Thread(s)	Engine Bae IMG_4992 by Brady Johnson, on Flickr IMG_4932 by Brady Johnson, on Flickr

User Name		Remember Me?
Password