Meaty Tire Thread - Page 73 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

pleong · 11-26-2014, 08:58 AM

I have 18x10 +40 ZE40s and running 285/30/18 tires -2 camber up front and -2.5 camber in the rear.. Running KWV3 coilovers, whiteline adjustable toe arms, camber bolts and LCAs, HVT Camber Plates

I just lowered the car back down last night after installing the stoptechs.. So the springs haven't settled in yet, but the rears poke out like crazy..

As far as tire to spring clearance it seems to be ok, until I put some load on it.. Wanted to ask before I hit the road and cause some damage to my wheels and/or springs...

Anyone have any rubbing issues? @Jive Turkey @OmarGC @AutoRnD

Passenger rear

Passenger front

OmarGC · 11-26-2014, 03:06 PM

Man that is a lot of rear poke, mine are no where near that and I'm currently -1.7ish out back.

As far as rubbing I personally have no issues, but am also only on 265/35's both front and rear. I cant recall the username at the moment but there is someone rubbing under full lock up front on the inner brake line bracket/mount...

s2d4 · 11-26-2014, 05:54 PM

Rear camber doesn't look like -2.5 if front was -2.
Front should always poke more on a square setup as the back has extra ~10-15mm.

fstlane · 11-27-2014, 10:34 PM

Something meaty for Thanksgiving!

255/40/17 R-S3s, 17x9+42 Rota Titans, front 10mm spacers, RCE Yellow springs, -1.8° rear and -3.1° front camber.

Pure Automotive · 11-30-2014, 02:22 PM

Check out our new Drag86 wheel package!

TylerLieberman · 11-30-2014, 02:46 PM

More pics. Still need something better to take pictures with

pleong · 11-30-2014, 02:52 PM

Quote:

Originally Posted by OmarGC

Man that is a lot of rear poke, mine are no where near that and I'm currently -1.7ish out back.

As far as rubbing I personally have no issues, but am also only on 265/35's both front and rear. I cant recall the username at the moment but there is someone rubbing under full lock up front on the inner brake line bracket/mount...

I just checked, I don't have any issues rubbing on the brake line braket/mount

Quote:

Originally Posted by s2d4

Rear camber doesn't look like -2.5 if front was -2.
Front should always poke more on a square setup as the back has extra ~10-15mm.

I think you're right.. I'll probably need to get an alignment again.. I did corner balance the car and the rear raised up a lot when I did it.. Thanks for the reminder!

OmarGC · 11-30-2014, 05:06 PM

Quote:

Originally Posted by TylerLieberman

More pics. Still need something better to take pictures with

Looking good Tyler. I been on the fence with getting these fenders and last night I seen a pic of a swp FRS with them and it had me sold. Now I'm torn again... This is the first pic that I've seen that shows a good angle of the differences in front and rear track. As much as it would benefit with an steering angle kit and sliding, I'm not sure if I could live without bringing the rear out.

Thank you for making me struggle again :'(

TylerLieberman · 11-30-2014, 05:26 PM

Quote:

Originally Posted by OmarGC

Looking good Tyler. I been on the fence with getting these fenders and last night I seen a pic of a swp FRS with them and it had me sold. Now I'm torn again... This is the first pic that I've seen that shows a good angle of the differences in front and rear track. As much as it would benefit with an steering angle kit and sliding, I'm not sure if I could live without bringing the rear out.

Thank you for making me struggle again :'(

Lol thanks.

The front is about the same as the rear now as far as width goes. Think of it like an s14 running stock rear quarters and origin 20mm fronts.

SavEvoIX · 12-08-2014, 01:39 PM

I just purchased some Enkei RS05-RR 18x9.5 +43 square wheels for my wife's FRS. She has TRD springs. What is the max width I can go with before I hit the spring perch?

Jive Turkey · 12-08-2014, 06:00 PM

probably a 245, you sure those will clear as is without spacers up front?

TylerLieberman · 12-08-2014, 06:09 PM

Quote:

Originally Posted by SavEvoIX

I just purchased some Enkei RS05-RR 18x9.5 +43 square wheels for my wife's FRS. She has TRD springs. What is the max width I can go with before I hit the spring perch?

Quote:

Originally Posted by Jive Turkey

probably a 245, you sure those will clear as is without spacers up front?

Yeah, as Jive said. You NEED a slip on spacer up front to clear the perch with that wheel. I know people here have run it without and it rubs.

I think a 3mm slip on is what people are using.

SavEvoIX · 12-08-2014, 07:17 PM

Quote:

Originally Posted by Jive Turkey

probably a 245, you sure those will clear as is without spacers up front?

Not sure from what I've found everybody that has these has Coilovers not springs. So even going from a 245/40 or 255/35 should be the same then?

Jive Turkey · 12-08-2014, 08:34 PM

you won't fit a 255. hell some meaty 245's won't even fit.

11-26-2014, 08:58 AM	#1009
pleong Senior Member Join Date: Nov 2012 Drives: 2013 Whiteout FR-S Location: Texas Posts: 815 Thanks: 163 Thanked 273 Times in 146 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Meaty Tire Thread I have 18x10 +40 ZE40s and running 285/30/18 tires -2 camber up front and -2.5 camber in the rear.. Running KWV3 coilovers, whiteline adjustable toe arms, camber bolts and LCAs, HVT Camber Plates I just lowered the car back down last night after installing the stoptechs.. So the springs haven't settled in yet, but the rears poke out like crazy.. As far as tire to spring clearance it seems to be ok, until I put some load on it.. Wanted to ask before I hit the road and cause some damage to my wheels and/or springs... Anyone have any rubbing issues? @Jive Turkey @OmarGC @AutoRnD Passenger rear Passenger front __________________ TEAM NEMESIS \| NEM 86 \| IG: @NEM_86 PTE5858 Turbo \| Integrated Engineering Fuel Surge Tank \| 1300cc Injectors \| Exedy Twin Disc \| RAYS Volk ZE40 \| 295/30/18 \| 522whp @ 6,600 Dyno Dynamics The NEM86 Build Thread Last edited by pleong; 11-26-2014 at 09:41 AM.

11-26-2014, 03:06 PM	#1010
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	Man that is a lot of rear poke, mine are no where near that and I'm currently -1.7ish out back. As far as rubbing I personally have no issues, but am also only on 265/35's both front and rear. I cant recall the username at the moment but there is someone rubbing under full lock up front on the inner brake line bracket/mount... __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

11-26-2014, 05:54 PM	#1011
s2d4 Senior Member Join Date: Mar 2013 Drives: R32 GTR, AW11 MR2 SC, GTS86 R Location: OZ Posts: 2,615 Thanks: 603 Thanked 1,223 Times in 708 Posts Mentioned: 35 Post(s) Tagged: 0 Thread(s)	Rear camber doesn't look like -2.5 if front was -2. Front should always poke more on a square setup as the back has extra ~10-15mm. __________________

11-30-2014, 02:46 PM	#1014
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,676 Thanks: 655 Thanked 3,344 Times in 1,577 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	More pics. Still need something better to take pictures with __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Winter Tire Review Thread (Please contribute)	pastuch	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	344	03-13-2024 05:49 PM
Wheel Directory: Forgestar F14 18x8.5 +38/18x9.5 +38	ScionFR-S	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	97	09-09-2015 06:32 PM
Meaty rubber on flush spoke rims?	red_comet	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	16	06-14-2013 12:21 PM
Official wheel/tire fitment thread needed	empower-auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	06-22-2012 01:40 AM
The Wheel and Tire Fitting Thread	EvoFanatic	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	2	03-15-2012 03:05 PM

11-27-2014, 10:34 PM	#1012
fstlane Senior Member Join Date: Apr 2013 Drives: BRZ Limited Location: Las Vegas, NV Posts: 289 Thanks: 742 Thanked 314 Times in 148 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Something meaty for Thanksgiving! 255/40/17 R-S3s, 17x9+42 Rota Titans, front 10mm spacers, RCE Yellow springs, -1.8° rear and -3.1° front camber.

11-30-2014, 02:22 PM	#1013
Pure Automotive Join Date: Nov 2012 Drives: 2013 FRS Whiteout Location: Millersville, MD Posts: 2,035 Thanks: 735 Thanked 1,952 Times in 650 Posts Mentioned: 147 Post(s) Tagged: 0 Thread(s)	Check out our new Drag86 wheel package!

12-08-2014, 01:39 PM	#1018
SavEvoIX Member Join Date: Aug 2013 Drives: Evolution IX, 13' FR-S White Out Location: Bay Area Posts: 49 Thanks: 2 Thanked 6 Times in 5 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I just purchased some Enkei RS05-RR 18x9.5 +43 square wheels for my wife's FRS. She has TRD springs. What is the max width I can go with before I hit the spring perch?

12-08-2014, 06:00 PM	#1019
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	probably a 245, you sure those will clear as is without spacers up front?

12-08-2014, 08:34 PM	#1022
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	you won't fit a 255. hell some meaty 245's won't even fit.

User Name		Remember Me?
Password