Chinese Ca-Fi knockoff has been rooted! Torque works!

[nzer]

Originally Posted by Tobz

That's good to know. When he installs the inline
Amp, see if he can confirm where to connect the blue wire too so we can add these in for the future.

That's really good news!

Sent from my HTC_PN071 using Tapatalk 2

Seems to me that in USA etc the inline amp may not be required - just the adapter wired in. I will try and get a photo of where it is wired for you. I think your Oz frequencies are similar to ours.

I wonder if it is due to the range of FM frequencies we use here that the inline amp may be required - then again, don't know if it is going to work yet! Tuesday is the day.

[pheoxs]

Got the unit woot. Now to sort out how to wire it all up, don't suppose someone has a write up of what they did?

Do only two of the three connectors on the harness line up? Mines four pins short on the largest white connector

Sent from my Nexus 4 using Tapatalk 2

[nzer]

Originally Posted by pheoxs

Got the unit woot. Now to sort out how to wire it all up, don't suppose someone has a write up of what they did?

Do only two of the three connectors on the harness line up? Mines four pins short on the largest white connector

Sent from my Nexus 4 using Tapatalk 2

Which unit?

[pheoxs]

Originally Posted by nzer

Which unit?

T7019A
@2forme

Is the root files for this unit the same as your first post? I'm on page 20 trying to find them

Sent from my Nexus 4 using Tapatalk 2

[Trap63]

Originally Posted by Pacific

My T7019A was shipped at HK on monday and received/delivered wednesday afternoon in France.
To minimize customs it was declared "monitor" with a value of 80$.
DHL, as usual, applied what they call VAT a lumpsum without any detail or explication and without any reference to customs regulation an amount of 29€. Taking into consideration the total amount involved it was not necessary to contest this amount.
The package is perfect and the connections complete for the Toyota harness.Just prepare the wiring for the reverse camera and the brake contact.
I'm just waiting to receive the antenna harness to mount the headunit in the car. During this time I will have a look on the light to see if it remain possible to change the color.

which cable, wiring solution for the rear camera on T7019. ?

I don't understand the meanings of "brake wire" and "reverse" wire on T7019A harness.
I have a rear camera with RCA (OK) red/black 12v/ground cable: where to wire? and near RCA plug (on each side) a short wire (red):where to wire them? My rear camera comes with poor install sheet.

Maybe this..... http://www.ft86club.com/forums/showp...&postcount=111

"cameras have dual taps on their power wire -- one near the camera and another near the HU. Rydeen's intention was that you power the camera by tapping your reverse lights wire (near the camera). The second lead would be available to provide the reverse gear signal to an aftermarket HU or monitor screen. But you can simply use the lead near the HU to power the camera (and insulate the lead near the camera)."

[Bigmaxy]

Has anyone had a look at what is involved in changing the leds to red on the 7019?

Sent from my GT-I9505 using Tapatalk 2

[Trap63]

Originally Posted by Bigmaxy

Has anyone had a look at what is involved in changing the leds to red on the 7019?

Sent from my GT-I9505 using Tapatalk 2

UHm..I open the back panel to verify DVB-T module (there isn't of course )...I saw a wide mainboard (horizontal) and a panel board. I think that the job isn't complex...on front panel.

[Tobz]

Originally Posted by Trap63

which cable, wiring solution for the rear camera on T7019. ?

I don't understand the meanings of "brake wire" and "reverse" wire on T7019A harness.
I have a rear camera with RCA (OK) red/black 12v/ground cable: where to wire? and near RCA plug (on each side) a short wire (red):where to wire them? My rear camera comes with poor install sheet.

Maybe this..... http://www.ft86club.com/forums/showp...&postcount=111

"cameras have dual taps on their power wire -- one near the camera and another near the HU. Rydeen's intention was that you power the camera by tapping your reverse lights wire (near the camera). The second lead would be available to provide the reverse gear signal to an aftermarket HU or monitor screen. But you can simply use the lead near the HU to power the camera (and insulate the lead near the camera)."

This is how I have installed my camera on the stock GPS unit. Not sure if this is the correct wire to use for the T7019A

http://www.carboncarsystems.com.au/m...20Tutorial.pdf

Sent from my HTC_PN071 using Tapatalk 2

[nzer]

@pheoxs I rooted my device using the same files @2forme posted. The root files are in post 1 on page 1 mate. Just follow his instructions EXCEPT you need to use a micro SD card and put it into the LEFT micro SD slot as the right one has nothing in it and you'll lose the micro SD card inside the unit like I did!

To wire it in just plug the stock plugs into the back of the unit. You only really need the main power one and antenna adapter (buy separately) plugged in with the blue antenna 12V wire connected to power from the adapter too.

I have plugged in the two plugs with all the RCA plugs and iPod connection in as well but other than the iPod connector I have nothing connected to the RCAs etc but have left them plugged in for safe keeping.

[pheoxs]

Originally Posted by nzer

@pheoxs I rooted my device using the same files @2forme posted. The root files are in post 1 on page 1 mate. Just follow his instructions EXCEPT you need to use a micro SD card and put it into the LEFT micro SD slot as the right one has nothing in it and you'll lose the micro SD card inside the unit like I did!

To wire it in just plug the stock plugs into the back of the unit. You only really need the main power one and antenna adapter (buy separately) plugged in with the blue antenna 12V wire connected to power from the adapter too.

I have plugged in the two plugs with all the RCA plugs and iPod connection in as well but other than the iPod connector I have nothing connected to the RCAs etc but have left them plugged in for safe keeping.

Thanks! I have that rom just wanted to make sure it was the right before I flash it. Also I already lost the sd card there haha had to take it apart to get it back.

Sent from my Nexus 4 using Tapatalk 2

[nzer]

Originally Posted by pheoxs

Thanks! I have that rom just wanted to make sure it was the right before I flash it. Also I already lost the sd card there haha had to take it apart to get it back.

Sent from my Nexus 4 using Tapatalk 2

You did better than me, I left mine inside!

[Skippman]

Originally Posted by nzer

You did better than me, I left mine inside!

That'll void your warrenty mate!

[nzer]

Originally Posted by Skippman

That'll void your warrenty mate!

LOL.

Got a friend that is an electronics whiz, @Tech, that may look at swapping out the green LEDs for me. If he does I'll make sure I get lots of photos as that will definitely void the warranty!!!

[Tobz]

Originally Posted by pheoxs

Got the unit woot. Now to sort out how to wire it all up, don't suppose someone has a write up of what they did?

Do only two of the three connectors on the harness line up? Mines four pins short on the largest white connector

Sent from my Nexus 4 using Tapatalk 2

Got it installed yet? Let us know how u went!

Sent from my HTC One using Tapatalk 2