BRZ Ts parts

[Jfheisenberg]

Originally Posted by switchlanez

The 1st set of links I posted (shipping from WA) that you clicked cost slightly more to ship to me than the 2nd set of links I posted (shipping from TX):

https://www.subaruwarehousedirect.co...ing-j1210ca301
https://www.subaruwarehousedirect.co...per-j1210ca401

That still may be expensive for you to ship from TX to NY. I'd look for parts websites based near your area. The parts may cost a little more than the two sites I posted (and definitely cheaper than dealerships) but shipping should be a lot less.

Thanks , is this the same strip you have in your brz? i saw the pics in your build thread and looks great.

[Jordan Silveira]

Originally Posted by norcalpb

Because shipping is $50 for each item and it’ll take like 2 weeks to get. If there’s a USDM version I bet I could save some money. And the new versions are black with a black sti logo. I want as few visible sti logos on my car as possible.

As crazy as people may think this sounds. I actually second this. While I have no problem getting the Flexible V Bars and Flexible Draw Stiffener from Japan I would really like to find the USDM STi V Bars for my build. Black accentuates my HyperBlue and the V Bars maintain that black look

[DSOmegaX]

For the front stripe, just a heads up that if you have the older bumper, you'll see small notches on the backside of it when installed. This is because the grille on the newer bumper sticks out further than the older one, which requires the notches to be there.

[JeremyR]

Originally Posted by DSOmegaX

For the front stripe, just a heads up that if you have the older bumper, you'll see small notches on the backside of it when installed. This is because the grille on the newer bumper sticks out further than the older one, which requires the notches to be there.

Good to know! I've got a '15 and plan on doing this so thanks for the info.

[switchlanez]

Originally Posted by Jfheisenberg

Thanks , is this the same strip you have in your brz? i saw the pics in your build thread and looks great.

Thanks, I actually used 3M red reflective tape but removed it because it didn't match an STI cherry blossom red skirt I added under the front lip. I don't expect these tS strips to color match exactly because they're different materials but should be close.


Here are the notches @DSOmegaX was referring to with grille slats protruding from grille frame:


Versus zenki grille slats being flush with the grille frame not needing notches:


The notches seem small enough to not bother me from standing distance. If I'm lucky they'll line up with the zenki slats and, despite not actually touching, won't look too out of place.

[DSOmegaX]

Can always do it with the EU chrome stripe repainted if it does bother you in the end regardless!

[Jfheisenberg]

I checked with a friend that i have at the subaru dealer near me and the price for the TS stripes are as follow:

Stripe Rear Bumper - Part #J1210CA401 – 175 + tax

Bumper Molding - Part #J1210CA301 – 288 + tax

Still expensive for two red stripes TBH.

[JonRZ]

Just a quick note! I placed an order for the tS Red Trim (Front and Back) and tS/STI 18x7.5 wheels successfully (at least for now)! So I'll be able to confirm to those wanting these parts. Here are the part numbers for reference. Pics to come!

28111CA130 - 18" tS/STI Wheels
J1210CA301 - Front Red/Cherry Stripe tS Molding
J1210CA401 - Rear Red/Cherry Stripe tS Molding

[stlgrym3]

anyone has the part number for the Brembo BBK comes with the TS or PP?

[trippinbillies40]

Originally Posted by stlgrym3

anyone has the part number for the Brembo BBK comes with the TS or PP?

There are several parts numbers as it's not sold as a kit and the whole thing will set you back over $4k all in. You're better off buying aftermarket IMO. But, if you really want the part numbers, let me know and I'll look them up for you when I get a chance.

[stlgrym3]

$4k is still cheaper than getting front and rear Brembo or Stoptech BBK right?

[illmatic]

Originally Posted by stlgrym3

anyone has the part number for the Brembo BBK comes with the TS or PP?

http://www.ft86club.com/forums/showthread.php?t=109786

[trippinbillies40]

Ok let's do this...

Front Caliper Mounting Bracket: 26261FE000, $53.25 x2
Front Mounting Bolt: 901120131, $4.32 x 4
Front Left Caliper: 26292CA060, $699.95
Front Right Caliper: 26292CA070, $699.95
Front Pads: 26296FE100, $299.95
Front Rotors: 26300FE001, $433.77 x2
Front Rotor Shield Right: 26290CA020, $22.27
Front Rotor Shield Left: 26290CA030, $22.27
Rotor Shield Bolts: 901000162, $1.08 x6

Front total: $2742.19

Rear Caliper Right: 26692CA060, $649.95
Rear Caliper Left: 26692CA070, $649.95
Rear Pads: 26696FG000, $239.95
Rear Mounting Bolts: 901000326, $3.37 x4

Rear Total: 1553.33

Front and rear total:$4295.52

It appears that hoses and rear brackets and rotors are the same. This is all MSRP, so you could probably get it all a bit cheaper by shopping around. Keep in mind you'll need wheels that clear the calipers, as well as a couple quarts of brake fluid.

[derekbrz24]

Does anyone have part numbers for the mesh grills on the tS?