JDL turbo kit owners thread - Page 56 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Amputechture · 01-21-2017, 08:32 PM

Quote:

Originally Posted by stevo585

Anyone here run the 5431 turbo? I just ordered my kit with the one size up from base.

Also are the spal fans necessary?

They are, I have their fan shroud and my turbo blanket rubs against the fan motor. No way in hell the factory fan setup will fit.

stevo585 · 01-21-2017, 11:19 PM

Quote:

Originally Posted by Amputechture

They are, I have their fan shroud and my turbo blanket rubs against the fan motor. No way in hell the factory fan setup will fit.

Wonder could you notch it? I really dont want to have to buy one more thing lol . I hear the spal fan have to be tapped into the fan harness...is there a wiring diagram for that? Thanks

Alltezza · 02-15-2017, 11:28 PM

Uh oh!

Saw this on IG.

stevo585 · 02-18-2017, 10:22 PM

So I have my kit from JDL. Couple questions:

1. How do I know I have everything?
2. Is the kit supposed to come with a turbine gasket? Mines a 4 bolt don't have it.
3. I only have 3 metal intake piping pieces. I expected more with the no cut option?
4. Is there an instruction manual or diagram at least to get an idea of the routing and order of steps?

Thanks.

ft86me · 02-18-2017, 10:23 PM

Quote:

Originally Posted by stevo585

So I have my kit from JDL. Couple questions:

1. How do I know I have everything?
2. Is the kit supposed to come with a turbine gasket? Mines a 4 bolt don't have it.
3. I only have 3 metal intake piping pieces. I expected more with the no cut option?
4. Is there an instruction manual or diagram at least to get an idea of the routing and order of steps?

Thanks.

I think your first step would've been to contact jdl rather than post here.

Sent from my iPhone using Tapatalk

Amputechture · 03-01-2017, 05:05 PM

Got her on the dyno yesterday
4854
EL Manifold
10 PSI
286/228 on a Mustang Dyno

Waiting on tuner to send the graphs. There is a weird torque dip that I'm hoping he can figure out and correct remotely. Bob Richards, Circuit Motorsports in Orlando FL.

PandaSPUR · 03-01-2017, 09:48 PM

Quote:

Originally Posted by Amputechture

Got her on the dyno yesterday
4854
EL Manifold
10 PSI
286/228 on a Mustang Dyno

Waiting on tuner to send the graphs. There is a weird torque dip that I'm hoping he can figure out and correct remotely. Bob Richards, Circuit Motorsports in Orlando FL.

That on 93?

Amputechture · 03-02-2017, 03:27 PM

Quote:

Originally Posted by PandaSPUR

That on 93?

Yes. Peak torque at 4,200.

Alltezza · 03-06-2017, 09:07 PM

Anyone running the new GT2860RS kit yet?

Amputechture · 03-17-2017, 04:08 PM

Version 2.0/Equal Length/Base Turbo/Mustang Dyno

ATL BRZ · 03-28-2017, 01:20 PM

Haven't posted in here yet. I recently ordered a new UEL kit with a GTX2860R Gen 2, both sides fully coated with oil pan and bumper bar. Should be shipping this week, hopefully!

Collecting supporting mods in the meantime.

MattTheGinge · 03-31-2017, 04:25 PM

Quote:

Originally Posted by ATL BRZ

Haven't posted in here yet. I recently ordered a new UEL kit with a GTX2860R Gen 2, both sides fully coated with oil pan and bumper bar. Should be shipping this week, hopefully!

Collecting supporting mods in the meantime.

turbos on the smaller side, no plan of going e85? should sp0ol up quick though!

Rybot · 03-31-2017, 04:29 PM

Quote:

Originally Posted by Alltezza

Hey man....you ever install that turbo(;

Sorry to be catching up on this after so long. I was super busy getting things installed at the end of last summer and then tuning it. I then forgot everything I said I'd do because I'm a doofus (as my post history portrays).

You should check out the update I just did to my build thread for some more info (and legit idiocy). If you have any questions, let me know.

Quote:

Originally Posted by ATL BRZ

Haven't posted in here yet. I recently ordered a new UEL kit with a GTX2860R Gen 2, both sides fully coated with oil pan and bumper bar. Should be shipping this week, hopefully!

Collecting supporting mods in the meantime.

I've had zero spool up issues with the 2867r in mine. Any reason why the 60r instead? Just want the latest and greatest? Did Jesse recommend that based on track metrics?

Btw, was wondering when you'd finally grab a kit.

If you need any info, I've already been through the joy of the install, so ask away.

Teseo · 03-31-2017, 04:39 PM

Quote:

Originally Posted by Rybot

If you need any info, I've already been through the joy of the install, so ask away.

Was plug-n-play? No hack job to get done?

02-18-2017, 10:22 PM	#774
stevo585 Senior Member Join Date: Feb 2014 Drives: White 2014 BRZ Location: Orlando, FL. Posts: 519 Thanks: 131 Thanked 155 Times in 109 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	So I have my kit from JDL. Couple questions: 1. How do I know I have everything? 2. Is the kit supposed to come with a turbine gasket? Mines a 4 bolt don't have it. 3. I only have 3 metal intake piping pieces. I expected more with the no cut option? 4. Is there an instruction manual or diagram at least to get an idea of the routing and order of steps? Thanks. __________________ JDL Turbo kit - Ecutek, HRI tuned.

03-28-2017, 01:20 PM	#781
ATL BRZ Driving Coach Join Date: Jun 2012 Drives: BRZ Location: Atlanta Posts: 3,666 Thanks: 3,723 Thanked 4,137 Times in 1,707 Posts Mentioned: 90 Post(s) Tagged: 6 Thread(s)	Haven't posted in here yet. I recently ordered a new UEL kit with a GTX2860R Gen 2, both sides fully coated with oil pan and bumper bar. Should be shipping this week, hopefully! Collecting supporting mods in the meantime. __________________ __________________________Pure Motorsport: JDL Turbo BRZ Track Build_______________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HKS Supercharger owners thread	wbradley	Forced Induction	1048	10-12-2023 08:03 PM
P&L Turbo kit Owners thread	Hawaiian	Forced Induction	73	07-07-2018 02:31 AM
To Greddy Turbo Owners (or SBD/Zage Turbo).... Melted Radiator Fans? General Opinion?	xuimod	Forced Induction	106	09-01-2016 07:33 PM
Offical 213/323/626/818 owners thread	mr. slim	Southern California	71	10-07-2013 12:58 PM
P&L Turbo Owners Topic Thread	GTB/ZR-1	Forced Induction	4	09-01-2013 06:27 PM

02-15-2017, 11:28 PM	#773
Alltezza Senior Member Join Date: Mar 2014 Drives: WRB Limited BRZ Location: Tennessee Posts: 696 Thanks: 450 Thanked 276 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Uh oh! Saw this on IG.

03-01-2017, 05:05 PM	#776
Amputechture Senior Member Join Date: Aug 2015 Drives: 2014 BRZ Location: FL Posts: 424 Thanks: 49 Thanked 143 Times in 111 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Got her on the dyno yesterday 4854 EL Manifold 10 PSI 286/228 on a Mustang Dyno Waiting on tuner to send the graphs. There is a weird torque dip that I'm hoping he can figure out and correct remotely. Bob Richards, Circuit Motorsports in Orlando FL.

03-06-2017, 09:07 PM	#779
Alltezza Senior Member Join Date: Mar 2014 Drives: WRB Limited BRZ Location: Tennessee Posts: 696 Thanks: 450 Thanked 276 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Anyone running the new GT2860RS kit yet?

03-17-2017, 04:08 PM	#780
Amputechture Senior Member Join Date: Aug 2015 Drives: 2014 BRZ Location: FL Posts: 424 Thanks: 49 Thanked 143 Times in 111 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Version 2.0/Equal Length/Base Turbo/Mustang Dyno

User Name		Remember Me?
Password