BBK Fitment Database? - Page 10 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SkAsphalt · 11-25-2015, 03:30 PM

Quote:

Originally Posted by liquidsky44

Thanx but now I gotta add spacers. The wheel does not flush with the fenders with the cambers I'm running.

Well that is another problem and that is more due to the offset of the wheels than the BBK

lamawithonel · 11-28-2015, 12:04 AM

Sparco Terra
16x7 +50: http://www.ft86club.com/forums/showthread.php?t=57975

Essex/AP Sprint Front

Looks like it will fit! Clearance is about 2 or 3mm to the spokes and a good 6-10mm to the wheel weights (sorry, I didn't measure).*

*The template's hub looks like it was designed for a slightly larger bore, so this may be off by a millimeter or two. The right side bent a little more than the left, so the true measurement should shift outward, giving a little more room to the spokes and a little less to the wheel weights. If anybody can confirm this, it would be appreciated.

Essex/AP Endurance Front

Will not fit. The barrel is too narrow.

(Both pictures feature the Sprint template.)

ThatBlueBRZ · 11-29-2015, 03:52 PM

I've got front and rear Stoptechs BBK. Front is 328x28mm and rears are 345x28mm. I'm sure the fronts with 328x28mm will fit over a 17" wheel diameter without any rubbing from the callipers to the inner wheel well of the rims. I am just worried about the rears with 345x28mm. Has anyone tried the rears over a 17" wheel? Thanks in advance!

Race · 05-10-2016, 10:53 AM

I can confirm that the StopTech 328x28 ST40 front brakes clears the following two rims without spacer.

O.Z. Leggera HLT 17x7.5 ET35
http://www.tirerack.com/wheels/Wheel...ight+Race+Grey

Enkei Fujin 17x7.5 ET40
http://www.tirerack.com/wheels/Wheel...=Black+Painted

I didn't take pictures but there are adequate rim clearance and lots of spoke clearance for both wheels.

asnatlas · 06-04-2016, 01:22 PM

Quote:

Originally Posted by F1point4

OEM Wheel
17x7 ET48: http://www.ft86club.com/forums/showp...39&postcount=3

Stoptech Front 328x28 ST40M Kit

20121012-86OEMWheelBBKTemplates-4 by VictorN07, on Flickr

Would 5mm spacers work or would I need 10mm (or larger)? Also would I just need need spacers on the front or should I do all 4 corners with the same spacer size ?

asnatlas · 06-07-2016, 10:36 AM

Anyone know the minimum spacer size needed for the Stoptech Front 328x28 ST40M kit with OEM wheels ?

Eazy-V · 08-06-2016, 03:22 AM

Anyone running BBK on 17x9.5 +40 TE-37RT?

pcuerpo · 11-07-2016, 11:31 AM

anybody here has the Project Mu brake kit (FS44-F103B)? or anybody knows how they make those templates? need to find out how is fitment with the RPF1 18x8 +35 since i just placed an order on the PMU.. need to know if i should order another set of wheels if there will be fitment issues

byun · 11-07-2016, 11:37 AM

Quote:

Originally Posted by Eazy-V

Anyone running BBK on 17x9.5 +40 TE-37RT?

I test fitted the those on my Stoptech 355 BBK Front and it clears with a few mm of clearance, would definitely have to be careful where you place the wheel weights.

eromsdal · 02-22-2017, 08:28 PM

I'm not sure if I missed it or not, I'm still getting used to using the forums on my iPhone but has anyone confirmed fitment of the STI Brembo BBK with enkei rpf1's 18"x9.5" +38? Thank you

akatosh · 04-03-2017, 08:09 AM

AP sprint kit with 2017 OEM wheel (17x7 +48). Would fit with > 15mm spacer.

jbailey8748 · 06-26-2017, 12:24 PM

Rpf1 17x9 +45 do fit the AP Sprint kit with 10mm spacers. On extended lugs of course.
3mm clearance

Sent from my Pixel using Tapatalk

Stang70Fastback · 06-26-2017, 01:42 PM

AP Racing 4-Pot Factory BBK clears both the 18x9+40 FF15 (HRE), and the 17x9+40 6UL (949 Racing) with room to spare. It also clears the stock wheels, as designed.

SpartaEvolution · 09-19-2017, 03:25 PM

Thank you for making this thread! I'd like to add our fitment templates to the list:

Front:
4 piston 330mm
86 Front 4P 330mm Fitment Template.pdf

6 piston 355mm
86 Front 6p 355mm Firtment Template.PDF

Rear:
4 piston 355mm
86 Rear 4p 355mm Fitment Template.PDF

11-28-2015, 12:04 AM	#128
lamawithonel Member Join Date: Mar 2014 Drives: 2014 Subaru BRZ Ltd. Location: Mid-Atlantic Posts: 53 Thanks: 131 Thanked 36 Times in 20 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	Sparco Terra 16x7 +50: http://www.ft86club.com/forums/showthread.php?t=57975 Essex/AP Sprint Front Looks like it will fit! Clearance is about 2 or 3mm to the spokes and a good 6-10mm to the wheel weights (sorry, I didn't measure).* The template's hub looks like it was designed for a slightly larger bore, so this may be off by a millimeter or two. The right side bent a little more than the left, so the true measurement should shift outward, giving a little more room to the spokes and a little less to the wheel weights. If anybody can confirm this, it would be appreciated. Essex/AP Endurance Front* Will not fit. The barrel is too narrow. (Both pictures feature the Sprint template.) Attached Images __________________ question everythinglearn somethinganswer nothing Last edited by lamawithonel; 11-28-2015 at 04:33 AM. Reason: clarification

11-07-2016, 11:31 AM	#134
pcuerpo Senior Member Join Date: Jun 2013 Drives: Toyota 86 Location: Philippines Posts: 334 Thanks: 278 Thanked 228 Times in 100 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	anybody here has the Project Mu brake kit (FS44-F103B)? or anybody knows how they make those templates? need to find out how is fitment with the RPF1 18x8 +35 since i just placed an order on the PMU.. need to know if i should order another set of wheels if there will be fitment issues __________________ 2013 Toyota 86 Sterling Silver Metallic IG: @pcuerpo.images

04-03-2017, 08:09 AM	#137
akatosh Junior Member Join Date: Mar 2017 Drives: Toyota 86/2017 & Volvo S60 T6 Location: South Korea Posts: 1 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	AP sprint kit with 2017 OEM wheel (17x7 +48). Would fit with > 15mm spacer. Attached Images Last edited by akatosh; 04-03-2017 at 08:32 PM.

06-26-2017, 01:42 PM	#139
Stang70Fastback A.K.A. Starlord Join Date: Oct 2013 Drives: 2015 Series.Blue Location: Illinois Posts: 1,842 Thanks: 845 Thanked 2,099 Times in 834 Posts Mentioned: 30 Post(s) Tagged: 3 Thread(s)	AP Racing 4-Pot Factory BBK clears both the 18x9+40 FF15 (HRE), and the 17x9+40 6UL (949 Racing) with room to spare. It also clears the stock wheels, as designed. __________________ . Check out my blog, read all about my BRZ adventures, and oogle my sweet cell-phone photos! You can also find me on Instagram, and on Facebook. Last edited by Stang70Fastback; 08-01-2018 at 04:01 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyno Database	E92M3Guy	Engine, Exhaust, Transmission	33	04-17-2013 10:20 AM
The Official BRZ Pre-Ordered Database Thread	Zaku	BRZ First-Gen (2012+) -- General Topics	727	03-17-2013 07:29 AM
We should start a dealer BRZ order database	eikond	BRZ First-Gen (2012+) -- General Topics	13	03-01-2012 12:56 PM

11-29-2015, 03:52 PM	#129
ThatBlueBRZ Senior Member Join Date: Mar 2015 Drives: 2015 Subaru BRZ Location: Toronto, Ontario Posts: 171 Thanks: 21 Thanked 19 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	I've got front and rear Stoptechs BBK. Front is 328x28mm and rears are 345x28mm. I'm sure the fronts with 328x28mm will fit over a 17" wheel diameter without any rubbing from the callipers to the inner wheel well of the rims. I am just worried about the rears with 345x28mm. Has anyone tried the rears over a 17" wheel? Thanks in advance!

05-10-2016, 10:53 AM	#130
Race Junior Member Join Date: Jun 2015 Drives: 2015 BRZ Limited 6MT Location: Motor City, Michigan Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 35 Post(s) Tagged: 1 Thread(s)	I can confirm that the StopTech 328x28 ST40 front brakes clears the following two rims without spacer. O.Z. Leggera HLT 17x7.5 ET35 http://www.tirerack.com/wheels/Wheel...ight+Race+Grey Enkei Fujin 17x7.5 ET40 http://www.tirerack.com/wheels/Wheel...=Black+Painted I didn't take pictures but there are adequate rim clearance and lots of spoke clearance for both wheels.

06-07-2016, 10:36 AM	#132
asnatlas Senior Member Join Date: Sep 2015 Drives: 2013 - BRZ - SWP Location: Grove City, Ohio Posts: 159 Thanks: 27 Thanked 24 Times in 20 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Anyone know the minimum spacer size needed for the Stoptech Front 328x28 ST40M kit with OEM wheels ?

08-06-2016, 03:22 AM	#133
Eazy-V Senior Member Join Date: Mar 2013 Drives: 2013 Scion FR-S Whiteout Location: Vancouver, BC Posts: 137 Thanks: 9 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anyone running BBK on 17x9.5 +40 TE-37RT?

02-22-2017, 08:28 PM	#136
eromsdal ERO Join Date: Jan 2014 Drives: '16 Subaru BRZ Series Hyperblue T Location: Staunton, VA Posts: 26 Thanks: 13 Thanked 6 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	I'm not sure if I missed it or not, I'm still getting used to using the forums on my iPhone but has anyone confirmed fitment of the STI Brembo BBK with enkei rpf1's 18"x9.5" +38? Thank you

09-19-2017, 03:25 PM	#140
SpartaEvolution Member Join Date: Aug 2017 Drives: NSX, G35, E36 328i racecar Location: Redmond, WA Posts: 15 Thanks: 2 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thank you for making this thread! I'd like to add our fitment templates to the list: Front: 4 piston 330mm 86 Front 4P 330mm Fitment Template.pdf 6 piston 355mm 86 Front 6p 355mm Firtment Template.PDF Rear: 4 piston 355mm 86 Rear 4p 355mm Fitment Template.PDF

User Name		Remember Me?
Password