Innovate (Sprintex) Supercharger Owners Topic - Page 431 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

R3NIK · 02-12-2015, 04:41 PM

Quote:

Originally Posted by SpeedWi

Anyone have a resource to acquire replacement parts for the 210 kit? Contacted Sprintex and nothing. Specifically this part.

Did you contact Sprintex USA at 405.607.2202?

SpeedWi · 02-12-2015, 04:44 PM

Yes and sent an email through their website. I have tried to contact them regarding something else and never got a response back.

R3NIK · 02-12-2015, 05:09 PM

Quote:

Originally Posted by SpeedWi

Yes and sent an email through their website. I have tried to contact them regarding something else and never got a response back.

I emailed them this afternoon to get a copy of their latest revision of the install guide, since I'm doing an install tomorrow. I had a response back with the attachment within 5 minutes. Sorry to hear your experience isn't going as smoothly. You could try calling Moto-East since they're a Sprintex dealer. I'm sure they can find you something.
And as an FYI for everyone, if you want the Rev. 1.10 of the install guide, let me know and I can send you the pdf. It's a bit more detailed than the 1.3 guide listed on their website.

SpeedWi · 02-12-2015, 05:22 PM

I'll try again tomorrow afternoon and see if I have any luck. If not ill try moto-east. If you can email that updated guide that would be great. I'll pm you with my email.

SpeedWi · 02-12-2015, 05:41 PM

Well I did get a call just a bit ago and they took care of my questions. I must have been a little impatient.

blown · 02-12-2015, 05:59 PM

have you tried calling?

I was told its a over the counter part.

TemeCal · 02-12-2015, 11:46 PM

Quote:

Originally Posted by SpeedWi

Anyone have a resource to acquire replacement parts for the 210 kit? Contacted Sprintex and nothing. Specifically this part.

I needed replacement parts, called twice, sent 4 emails...nothing. Just when I was about to give up, I called one more time. I got in touch with Gary Turner, and he priced out the parts for me. Try calling and asking for Gary Turner. PM me for his email address, if you prefer emailing him.

However, the part you need is a standard bypass actuator you can buy from many shops. Look at the part number, and just buy it online. Sprintex will probably be higher priced anyway.

Check the part number, but I believe this is what you need:
https://jonbondperformance.com/index...roducts_id=672

Edit: On a side note, I hope you never need any of their special parts (throttle body harness, inlet tube, etc...). Those parts are nearly impossible to get from them. I was having to buy them from Sprintex Australia and pay for the shipping to the U.S. It's very frustrating. You'd think they would stock some of the parts.

Chad86 · 02-13-2015, 12:50 AM

How many whp can I expected when running the 210 on 93/94 octane with all stock internals?

jflogerzi · 02-13-2015, 01:07 AM

Quote:

Originally Posted by Chad86

How many whp can I expected when running the 210 on 93/94 octane with all stock internals?

probally 215-230HP depending on pulley size selection.

Chad86 · 02-13-2015, 01:10 AM

Quote:

Originally Posted by jflogerzi

probally 215-230HP depending on pulley size selection.

That is disappointing for power figures. There is no E85 where I live.
Moto-East said I would need to run the 335 to hit 300 whp on 94 octane. I just need to know how reliable and safe this is. Waiting to hear back.

jflogerzi · 02-13-2015, 01:14 AM

Quote:

Originally Posted by Chad86

That is disappointing for power figures. There is no E85 where I live...
Moto-East said I would need to run the 335 to hit 300 whp on 94 octane. I just need to know how reliable and safe this is. Waiting to hear back.

If you are looking for power numbers, your better off getting a turbo if you have 93/94 in your area. JDL's base kit with a bit of extra boost should be perfect

EAGLE5 · 02-13-2015, 02:06 AM

To get big FA20 HP on 91/93 takes dropping compression. That's life.

ft86socal · 02-13-2015, 02:26 AM

Hey guys, I'm taking off my charger, How do I flash to stock tune? Where do I get the stock tune? Thanks.

tahdizzle · 02-13-2015, 01:00 PM

No news on sprintex getting CARB?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 10:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 06:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 12:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-17-2012 11:38 PM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 05:14 PM

02-12-2015, 05:59 PM	#6026
blown Senior Member Join Date: Sep 2014 Drives: ft86 Location: ft86 Posts: 232 Thanks: 3 Thanked 25 Times in 21 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	have you tried calling? I was told its a over the counter part.

02-13-2015, 02:26 AM	#6033
ft86socal Member Join Date: Sep 2013 Drives: frs Location: United States Posts: 21 Thanks: 1 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey guys, I'm taking off my charger, How do I flash to stock tune? Where do I get the stock tune? Thanks.

User Name		Remember Me?
Password