OpenFlash Tablet: OTS v2.0 Beta (132 new maps, 12 new XMLs) Available for Download

[riboyster]

Hey guys. Is it possible to add more boost to the Vortech kit in the future? Would it be hard? I'd ideally like to be at at least 280hp. Is it as easy as installing a stiffer spring and tuning?

[swarb]

Originally Posted by riboyster

Hey guys. Is it possible to add more boost to the Vortech kit in the future? Would it be hard? I'd ideally like to be at at least 280hp. Is it as easy as installing a stiffer spring and tuning?

ask in the Vortech thread?

[Ryder86]

Originally Posted by steve99

looks like you getting old page data ,clear you browser cache it will probably be ok

current tunes are 2.07

or try here

http://openflashtablet.com/Automotiv...S%20v2.070.zip


http://openflashtablet.com/Automotiv...ads/index.html

Getting this thread back on track. Is the above zip file the beta tune for 91 UEL stage 2?
If not, when will it be openly available??

[steve99]

Originally Posted by Ryder86

Getting this thread back on track. Is the above zip file the beta tune for 91 UEL stage 2?
If not, when will it be openly available??

the 2.070 tunes are full release not beta, their will be a stage 2 91 tunes in the zip file

the new beta tunes have not been released yet and are only for open flash headers on 91/92 petrol, not sure when they will be released probably a few weeks away

[riboyster]

Tune for 89 Octane 0 ethanol finalized. Let me know if you or anyone you know wants the tune.
Virtual dyno should be up at some point this week.

http://www.datazap.me/u/riboyster/fi...&data=1-3-9-10

[winsometang]

i recently installed the crawford bpbs and im trying change my tune from stage 1 to the beta bpb tunes provided on the openflash website. however, whenever i try to load any new tune onto the tablet it it says "incorrect checksum". anyone have any ideas as to whats going on?

[riboyster]

Originally Posted by winsometang

i recently installed the crawford bpbs and im trying change my tune from stage 1 to the beta bpb tunes provided on the openflash website. however, whenever i try to load any new tune onto the tablet it it says "incorrect checksum". anyone have any ideas as to whats going on?

Maybe if there's any way to wipe your OFT to factory, and update again? Sounds to me like it could have been a problem in the updates. If not, then possibly a problem with your bin files. If the bins that come from the website don't work as well, my money would be up corrupted update files.

[riboyster]

Also, has anyone heard anything new on speed density development? Getting close to committing on a supercharger that isn't the one of my dreams.

[Kodename47]

Originally Posted by riboyster

Also, has anyone heard anything new on speed density development? Getting close to committing on a supercharger that isn't the one of my dreams.

http://www.ft86club.com/forums/showthread.php?t=86521

[n8dog11914]

Hey Guys,

New to the OFT. I just need the Stage 1 tune but was looking for the 93 octane version. However, my device only shows B01C without the 91 or 93 octane designation. Any thoughts? Do I just need to re-download the latest files?

Thanks,

[n8dog11914]

Originally Posted by n8dog11914

Hey Guys,

New to the OFT. I just need the Stage 1 tune but was looking for the 93 octane version. However, my device only shows B01C without the 91 or 93 octane designation. Any thoughts? Do I just need to re-download the latest files?

Thanks,

Well..answered my own question...I just decided to go ahead and download the latest 93 tune and simply flashed it to the car in place of the old tune.

[Mad1723]

Originally Posted by n8dog11914

Well..answered my own question...I just decided to go ahead and download the latest 93 tune and simply flashed it to the car in place of the old tune.

Good thing, it's always better to just get the latest version

[riboyster]

Highly suggest using romraider and waynos tables. Look into it. It looks a lot more intimidating than it actually is.

[kill4rice]

Link?

Sent from my SAMSUNG-SM-N910A using Tapatalk