Nameless Performance Equal Length Stepped Header - Page 105 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FR-S Matt · 03-18-2013, 04:26 PM

Quote:

Originally Posted by Tainen

I will. just a matter of time.

I'm sure the 8" offset, with 2.5" OP/DP, and the longtube design will sound pretty good. Jason also mentioned he's messing with midpipe options with different resonators to combat the sound as well and keep the full system 2.5 or 3". Just so much work to do... I can see why they are so busy all of the time.

Captain Insano · 03-18-2013, 04:29 PM

I am willing to wait for quality. The header is the most anticipated part on my car I want to modify so this is the pinnacle for me. :-)

I really want to see the long tube iteration #3 above with 2.5" exhaust. I'll be using a 2.5" exhaust.

Gary in NJ · 03-18-2013, 04:38 PM

I'm interested in seeing an integrated solution of intake, intake manifold, header (w/cat), full exhaust and ECU tune. I'd be willing to wait for something that has been designed and tested as a system.

OrbitalEllipses · 03-18-2013, 04:46 PM

Let's just ship our cars to Nameless and have them rework everything. Blank cheque and all.

Sportsguy83 · 03-18-2013, 04:48 PM

Quote:

Originally Posted by OrbitalEllipses

Let's just ship our cars to Nameless and have them rework everything. Blank cheque and all.

+1

FR-S Matt · 03-18-2013, 05:00 PM

Quote:

Originally Posted by OrbitalEllipses

Let's just ship our cars to Nameless and have them rework everything. Blank cheque and all.

I'll just get up 2 hours earlier and walk 13 miles for headers. Makes sense to me!

Calum · 03-18-2013, 05:33 PM

Quote:

Originally Posted by FR-S Matt

I'll just get up 2 hours earlier and walk 13 miles for headers. Makes sense to me!

I have three cars. If they want mine until they are done, and I get to keep the final products, I'll drive my car to them and take a bus home. I have tomorrow off if they need me to start driving tonight.

Ok, so I just checked the map. It's a few days drive. Maybe not tonight.

Chewie4299 · 03-18-2013, 05:42 PM

Quote:

Originally Posted by Calum

I have three cars. If they want mine until they are done, and I get to keep the final products, I'll drive my car to them and take a bus home. I have tomorrow off if they need me to start driving tonight.

Ok, so I just checked the map. It's a few days drive. Maybe not tonight.

I was gonna say.... that's clear across the continent for you.

Calum · 03-18-2013, 05:46 PM

Quote:

Originally Posted by Chewie4299

I was gonna say.... that's clear across the continent for you.

Yeah... I didn't realize just how far it was until I looked up their location. Google says 55 hours of driving... So I humbly renege my previous claim.

Chewie4299 · 03-18-2013, 06:10 PM

I recently checked out what the driving route from my house to Anchorage, Alaska would be.

3d 6h driving 4444 miles.

And, of course, I'd need to get a Pasport first. Though I really gotta get on that for work anyway.

chanomatik · 03-18-2013, 06:34 PM

Quote:

Originally Posted by Chewie4299

I recently checked out what the driving route from my house to Anchorage, Alaska would be.

3d 6h driving 4444 miles.

And, of course, I'd need to get a Pasport first. Though I really gotta get on that for work anyway.

I approve this sentiment. haha Just got the passport and heading down to the states in May. I'm REALLY hoping I can stop by the Nameless shop while I'm in Seattle.

Bonburner · 03-18-2013, 06:38 PM

they might be almost done/done with the header .. their facebook said something about starting intake development!
"These are the new filters for our WRX, STi, BRZ & FR-S Intakes. Also FXT, LGT and OBXT."
https://sphotos-b.xx.fbcdn.net/hphot...41291323_n.jpg

LeeMaster · 03-18-2013, 06:50 PM

Quote:

Originally Posted by Chewie4299

I recently checked out what the driving route from my house to Anchorage, Alaska would be.

3d 6h driving 4444 miles.

And, of course, I'd need to get a Pasport first. Though I really gotta get on that for work anyway.

I was down on vacation in Florida a few months back and saw a car from Alaska, damn I feel bad for the car, lol.

back to topic....

Calum · 03-18-2013, 07:30 PM

Quote:

Originally Posted by Chewie4299

I recently checked out what the driving route from my house to Anchorage, Alaska would be.

3d 6h driving 4444 miles.

And, of course, I'd need to get a Pasport first. Though I really gotta get on that for work anyway.

So what's in Anchorage that you drive there for?

03-18-2013, 06:10 PM	#1466
Chewie4299 Spaceman Join Date: Jun 2012 Drives: 2013 Firestorm Scion FR-S Location: Wallingford, CT Posts: 1,581 Thanks: 854 Thanked 860 Times in 468 Posts Mentioned: 25 Post(s) Tagged: 0 Thread(s)	I recently checked out what the driving route from my house to Anchorage, Alaska would be. 3d 6h driving 4444 miles. And, of course, I'd need to get a Pasport first. Though I really gotta get on that for work anyway. __________________ 2013 Firestorm Scion FR-S - Car Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nameless Performance BRZ Axleback Exhaust	ESBjiujitsu	Engine, Exhaust, Transmission	1377	04-21-2020 02:23 AM
Nameless Performance Axleback is available for pre-order.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	114	07-23-2012 10:38 PM
Nameless Performance Downpipe is available for pre-order.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	4	07-12-2012 04:57 PM
We are Nameless Performance.	John@Nameless	Announcements, Contests, Giveaways	22	06-18-2012 11:32 PM
Nameless Performance is here.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	16	06-06-2012 04:32 AM

03-18-2013, 04:29 PM	#1458
Captain Insano Senior Member Join Date: Sep 2012 Drives: 2014 Jeep Wrangler RubiconX Location: Midwest, USA Posts: 1,282 Thanks: 110 Thanked 292 Times in 224 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	I am willing to wait for quality. The header is the most anticipated part on my car I want to modify so this is the pinnacle for me. :-) I really want to see the long tube iteration #3 above with 2.5" exhaust. I'll be using a 2.5" exhaust.

03-18-2013, 04:38 PM	#1459
Gary in NJ Senior Member Join Date: Feb 2013 Drives: WR Blue BRZ, 240Z Location: Amongst the twisty roads Posts: 587 Thanks: 21 Thanked 412 Times in 206 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	I'm interested in seeing an integrated solution of intake, intake manifold, header (w/cat), full exhaust and ECU tune. I'd be willing to wait for something that has been designed and tested as a system.

03-18-2013, 04:46 PM	#1460
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,889 Times in 2,902 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	Let's just ship our cars to Nameless and have them rework everything. Blank cheque and all.

User Name		Remember Me?
Password