Hanakuso's Whiteout FR-S

[Hanakuso]

This will basically be my timeline of mods that I add over time.

Exterior

• JDM Toyota/Subaru Underpanel set (4 pieces)
• JDM Toyota 86 Clear Sidemarkers
• Grimmspeed License Relocation Kit
• Drilled OEM Tow Hook cover

Interior

• JDM Toyota 86 Frameless Mirror
• Scion Bespoke Headunit
• OEM Armrest
• Subaru BRZ Premium Front Seats
• Subaru BRZ E-Brake/Boot
• Subaru STi Titanium Shift Knob (Burnt by WC Lathe)

Power

• TRD USA Intake
• Berk Muffler Delete
• Perrin Overpipe
• Perrin Frontpipe
• Saikou Michi Catch Can

Brakes

• Track - Front AP Racing C300 pads
• Street - Front Hawk HPS pads
• Centric Premium Rear Rotors for Track
• Essex AP Racing Sprint Brake System
• Goodridge SS Brakelines
• Motiv Master Cylinder Brace

Suspension

• Eibach Multi-Pro R2 400/500 lbs springs
• Front Camber Crash Bolts
• TRD Door Stabilizer Kit
• TIC Steering Rack Bushings
• Silver Enkei RPF1 17x8 +45

Drivetrain

• Perrin Rear Shifter Bushing
• Kartboy Transmission Insert Bushing

Miscellaneous

• JDM Toyota Key Cover
• Mine's Keychain

Here's an old picture of my S2000. This picture was taken in 2006

[Hanakuso]

Ended up buying a member's Bespoke headunit. Hopefully I get it within the week and i'll have pictures up.

My GF is in Japan right now and I might make her bring me back a recaro seat.

[BRZer86]

Nice seats but your waist size can't exceed 28 to fit in those. They seem to be very narrow.

[Hanakuso]

Originally Posted by BRZer86

Nice seats but your waist size can't exceed 28 to fit in those. They seem to be very narrow.

They're narrow but not that narrow. Well at least 3 years ago when I tried them they fit snug and I'm a 34. I would say that is the max width

[Hanakuso]

Side by side comparison of the JDM optional frameless mirror. The one really thing about it is the 2 pivots that would let the mirror sit much higher or lower. I basically have it sitting at it's max height and it gives me about 1-2 inches more of viewing space

[wallace03]

Originally Posted by Hanakuso

Side by side comparison of the JDM optional frameless mirror. The one really thing about it is the 2 pivots that would let the mirror sit much higher or lower. I basically have it sitting at it's max height and it gives me about 1-2 inches more of viewing space

where did you get the mirror?

[Hanakuso]

Originally Posted by wallace03

where did you get the mirror?

Nigel, he had some in stock as of last week

http://www.ft86club.com/forums/showthread.php?t=10731

[wallace03]

Originally Posted by Hanakuso

Nigel, he had some in stock as of last week

http://www.ft86club.com/forums/showthread.php?t=10731

ah, thanks. a little more than i want to pay :/

[Hanakuso]

My GF's father surprised me with a very nice present, the Tamiya 86 model. He's from an small island with a population of only 50 and he usually works on RC airplanes models, so i'm sure he was glad I did get happy from his present. He also mentions if I need any car parts from Japan he could help me out

It should look like this after paint/installing

[Turbowned]

Cool model! What is the name of that Recaro seat? That thing looks amazing! I've never seen it before. It looks like a mix between my Profi SPG and the Evo X seat.

[Hanakuso]

Originally Posted by Turbowned

Cool model! What is the name of that Recaro seat? That thing looks amazing! I've never seen it before. It looks like a mix between my Profi SPG and the Evo X seat.

Top one is the TS-G and the bottom is the RS-G. Very similar with the exception of the seat angle is slightly different. Just be warned you have to have a small waist. Probably 34 and lower is best.

[Turbowned]

Oh yeah, I'm really skinny. I have the Profi SPG right now which is at most designed for a 36 waist.

[Hanakuso]

Originally Posted by Turbowned

Oh yeah, I'm really skinny. I have the Profi SPG right now which is at most designed for a 36 waist.

It is a little smaller then the SPG at the waist, but if you have room to spare then you should be fine.


Small update/purchase. I accidentally chipped my door in my garage, so I went ahead and bought the Dr Colorchip kit and things came out better then excepted. There still is a very small indent but the actual paint is sealed up and it the color matching is good. Better then my OEM Honda touch up paint in the past at least.

Before


After applying paint and smearing it


After cleaning it up

[Hanakuso]

Installed the Grimmspeed License Relocation Kit and drilled the tow hook cover. I made a DIY here.


http://www.ft86club.com/forums/showthread.php?t=15922