OLM Bixenon Low / High Beam Projector Fog Lights Installation - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Spocknasty · 11-02-2017, 08:36 PM

I picked up the OLM Bixenon Low / High Beam Projector Fog Lights to reveal the wooded surroundings at night on the way back from mountain biking - almost hitting deer every time is far from ideal.

I did some searching and haven't been able to find the locations for the following plugs:

"To stock high beam"
"High beam input from vehicle"
"Fog light input from vehicle"

If someone could shine some light on the locations for me I'll happily post up a review after.

mrderp · 11-03-2017, 06:00 PM

Here's the headlight harness pinout for a '13 BRZ.

White = Turn signal +
Green = Boomerang LED +
Thin Black = Common Ground
Yellow = High beam +
Red = Low beam +
Thick Black = Low beam ground
Blue = High beam ground

You will need to tap your hi beam input connector into the YELLOW and BLUE wires.
As for the stock fogs, if you didn't have any, look at the fog installation howto to get the wiring details. http://www.ft86club.com/forums/showthread.php?t=27581

Spocknasty · 11-03-2017, 06:03 PM

Are those harness plugs not intended to plug directly into the factory plugs?

mrderp · 11-03-2017, 06:17 PM

Can you show us the actual harness kit you got with the fogs?

mrderp · 11-03-2017, 06:21 PM

If you mean you have this harness: http://www.ft86speedfactory.com/olm-...2013-ft86.html

Your BRZ has factory HID, you don't have the hi beam plug that this kit is for.
It's not going to be plug and play.

Spocknasty · 11-03-2017, 08:06 PM

Quote:

Originally Posted by mrderp

If you mean you have this harness: http://www.ft86speedfactory.com/olm-...2013-ft86.html

Your BRZ has factory HID, you don't have the hi beam plug that this kit is for.
It's not going to be plug and play.

So I'm basically tapping in to the factory high beam wiring and running to the connector coming off of the rear of the foglights to control the mechanical flaps?

Where am I tapping in to the "fog light input from vehicle" as I'm not seeing a matching plug - or will that require custom wiring as well?

Poodles · 11-04-2017, 01:24 AM

Quote:

Originally Posted by Spocknasty

Are those harness plugs not intended to plug directly into the factory plugs?

No, as it's meant for the FRS.

Spocknasty · 11-08-2017, 12:03 AM

At this point I just need to know where to tap for the "fog light input from vehicle"

Spocknasty · 11-16-2017, 10:05 PM

Quote:

Originally Posted by Spocknasty

At this point I just need to know where to tap for the "fog light input from vehicle"

Can anyone answer this question? I'd like to install this weekend.

11-02-2017, 08:36 PM	#1
Spocknasty Member Join Date: Aug 2015 Drives: 2013 BRZ Limited / 1990 Turbo Miata Location: Philadelphia Posts: 59 Thanks: 9 Thanked 33 Times in 19 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	OLM Bixenon Low / High Beam Projector Fog Lights Installation I picked up the OLM Bixenon Low / High Beam Projector Fog Lights to reveal the wooded surroundings at night on the way back from mountain biking - almost hitting deer every time is far from ideal. I did some searching and haven't been able to find the locations for the following plugs: "To stock high beam" "High beam input from vehicle" "Fog light input from vehicle" If someone could shine some light on the locations for me I'll happily post up a review after. __________________ Automotive photo and video www.mikespock.com

11-03-2017, 06:03 PM	#3
Spocknasty Member Join Date: Aug 2015 Drives: 2013 BRZ Limited / 1990 Turbo Miata Location: Philadelphia Posts: 59 Thanks: 9 Thanked 33 Times in 19 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Are those harness plugs not intended to plug directly into the factory plugs? __________________ Automotive photo and video www.mikespock.com

11-08-2017, 12:03 AM	#8
Spocknasty Member Join Date: Aug 2015 Drives: 2013 BRZ Limited / 1990 Turbo Miata Location: Philadelphia Posts: 59 Thanks: 9 Thanked 33 Times in 19 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	At this point I just need to know where to tap for the "fog light input from vehicle" __________________ Automotive photo and video www.mikespock.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OLM bixenon fog light and wiring harness for fog with high beams	NahumCC	Cosmetic Modification (Interior/Exterior/Lighting)	42	08-10-2016 01:46 PM
Dash lights and high beam icon are on but..	GT 86 Brah	Issues \| Warranty \| Recalls / TSB	3	06-28-2016 12:18 AM
OLM Bixenon Projector Foglights:Review	15limited	Cosmetic Modification (Interior/Exterior/Lighting)	7	10-31-2015 10:48 PM
Scion FRS H11 Projector Low beam CREE LED replacement	dssence	Cosmetic Modification (Interior/Exterior/Lighting)	23	04-08-2014 11:18 PM
PHASTEK High / Low Beam Fog Lights for the FR-S & BRZ	PhastekSport	Exterior Parts - Lighting	35	01-06-2014 10:23 AM

11-03-2017, 06:00 PM	#2
mrderp ಠ_ಠ Join Date: Jan 2016 Drives: 860 SansOverspray Location: CA Posts: 209 Thanks: 164 Thanked 146 Times in 99 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Here's the headlight harness pinout for a '13 BRZ. White = Turn signal + Green = Boomerang LED + Thin Black = Common Ground Yellow = High beam + Red = Low beam + Thick Black = Low beam ground Blue = High beam ground You will need to tap your hi beam input connector into the YELLOW and BLUE wires. As for the stock fogs, if you didn't have any, look at the fog installation howto to get the wiring details. http://www.ft86club.com/forums/showthread.php?t=27581

11-03-2017, 06:17 PM	#4
mrderp ಠ_ಠ Join Date: Jan 2016 Drives: 860 SansOverspray Location: CA Posts: 209 Thanks: 164 Thanked 146 Times in 99 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can you show us the actual harness kit you got with the fogs?

11-03-2017, 06:21 PM	#5
mrderp ಠ_ಠ Join Date: Jan 2016 Drives: 860 SansOverspray Location: CA Posts: 209 Thanks: 164 Thanked 146 Times in 99 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	If you mean you have this harness: http://www.ft86speedfactory.com/olm-...2013-ft86.html Your BRZ has factory HID, you don't have the hi beam plug that this kit is for. It's not going to be plug and play.

User Name		Remember Me?
Password