Philippines

[dagame]

Originally Posted by NIKDENG

@dagame,

Nice. Those gunmetal Advan RS wheels go well with the red. Saw your car along del monte as I was going to our old house in q.c.. The front wheels look nice and flush but the rear wheels would look better and flush with a 3mm spacer.

By the way, Stivo has already finished their chin spoiler for the BRZ which would look really good on your slammed car and at 12,000 pesos only, you won't feel too bad if you scrape it every now and then.

yeah haha i was thinking of something similar but they didn't have the spacer that i wanted when i had the springs installed. with regard to the chin, i was thinking of purchasing the chargespeed lip para whole wrap around na siya. but i think the addition of the lip would cost me another inch or two of clearance off the ground?

[NIKDENG]

Originally Posted by dagame

yeah haha i was thinking of something similar but they didn't have the spacer that i wanted when i had the springs installed. with regard to the chin, i was thinking of purchasing the chargespeed lip para whole wrap around na siya. but i think the addition of the lip would cost me another inch or two of clearance off the ground?

@dagame,

Just be careful with the use of spacers. For non bolt-on spacers, you should not exceed 5mm. If you are going with bolt on spacers, you can go as high as 20mm but make sure that the spacers are hubcentric otherwise you will have wheel vibration issues. Also do not use those replica aluminum nuts (rays, d1, works, etc. knock-offs) as they loose their threads very easily and can cause you to loose a wheel. The chargespeed lip will remove another 1 1/2 inch from your clearance up front.

[dagame]

Originally Posted by NIKDENG

@dagame,

Just be careful with the use of spacers. For non bolt-on spacers, you should not exceed 5mm. If you are going with bolt on spacers, you can go as high as 20mm but make sure that the spacers are hubcentric otherwise you will have wheel vibration issues. Also do not use those replica aluminum nuts (rays, d1, works, etc. knock-offs) as they loose their threads very easily and can cause you to loose a wheel. The chargespeed lip will remove another 1 1/2 inch from your clearance up front.

i was thinking of going for a 3 or 5mm spacer for the rear, non bolt-on one. yeah, its not safe to go past 5mm for those kinds. 1 1/2 inch? i think i have to think that one through first hehe parang wala nang maiiwan na clearance up front for me to clear the everyday hurdles of speed bumps, potholes, parking inclines, etc.

[abling2]

hello folks baka pwede po matanung how much ang TRD kit sa pinas? and please include the price and what are the included parts with it... thank you!

[NIKDENG]

Originally Posted by abling2

hello folks baka pwede po matanung how much ang TRD kit sa pinas? and please include the price and what are the included parts with it... thank you!

@abling2,

The complete TRD kit as offered by Toyota Motors Philippines:

BODY KIT
* Front skirt - P41,600 ~952.80 USD
* Side skirt - P47,900 ~180.94 USD
* Rear skirt - P41,600 ~952.80 USD
* Rear trunk spoiler - P31,200 ~714.60 USD
* Rear diffuser - P19,200 ~439.75 USD
SUSPENSION
* Shock absorber set - P208,700 ~4,780.03 USD
* Coil spring set - P42,400 ~971.12 USD
* Stabilizer set - P78,400 ~1,795.66 USD
* Front tower bar - P29,500 ~675.66 USD
* Member brace set - P58,700 ~1,344.45 USD
INTAKE AND EXHAUST
* Sports air filter - P10,300 ~235.91 USD
* High-response muffler - P125,600 ~2,876.72 USD
* Muffler garnish - P12,700 ~290.88 USD
ENGINE
* Radiator cap - P3,400 ~77.87 USD
* Oil filler cap - P11,200 ~256.52 USD
* Sports oil filter - P3,600 ~82.45 USD
OTHERS
* Push start switch - P16,100 ~368.75 USD
* Door stabilizer - P15,900 ~364.17 USD
* Fuel cap cover - P4,300 ~98.49 USD

[andrewFT86]

Originally Posted by abling2

hello folks baka pwede po matanung how much ang TRD kit sa pinas? and please include the price and what are the included parts with it... thank you!

The cost of original TRD parts are at least 10% more from aftermarket shops and can be 50% more if you get it from local Toyota dealers.
Price list according to the local Top Gear Philippineshttp://www.topgear.com.ph/news/toyot...e-for-86-coupe

I bought my door stabilizer in Japan for less than 10k. Toyota dealers sell them for 15.9K.
A friend who imports parts from Japan sells them for around 11k.
Copy TRD body kits are around 35k. These are usually sourced from Taiwan.

[abling2]

thanks folks mahal din pla dyan parang mas mura pa dito sa US

[melon]

You could check TRD parts at www.japanparts.com located at Japan. hehe...
It seems parang naka SALE pa sila ngayon. Ang problema lang, pano paparatingin dito sa Pinas.

I like the TRD kit, thou d ko lang type rear skirt and muff combo.
I'm Looking for the Modellista Rear Skirt and Shark Fin. Can't seem to find someone who can supply.
Anyone? ABS Plastic sana.. :/

BTW:
Here's my temporary plate:

[switchlanez]

I saw this BRZ on some Philippine FB pages. Wheels look like Prodrive GC-07G in British Gold. Who's is this?





Also, add me. I'm Filipno, too, but in America. lol

[dagame]

Originally Posted by switchlanez

I saw this BRZ on some Philippine FB pages. Wheels look like Prodrive GC-07G in British Gold. Who's is this?

the owner of the car is the owner of garage one here in the philippines. he's a member in the fb group. im not sure though if he's here though.

https://www.facebook.com/dexter.chiong.71?fref=ts
https://www.facebook.com/GarageOneAu...ceShop?fref=ts

[THRD86]

i saw 2 white brz's in tagaytay last sunday afternoon ^_^
may i just ask how to post a picture in this forum, i use photobucket and i tried several things that i think i should do. but nothing works^^ thanks!

[dagame]

Originally Posted by THRD86

i saw 2 white brz's in tagaytay last sunday afternoon ^_^
may i just ask how to post a picture in this forum, i use photobucket and i tried several things that i think i should do. but nothing works^^ thanks!

try putting "[IMG] and [/IMG]" at the start and end of each url for the picture or for photobucket, go to your album and click on the pic. on the right side of the pic you'll see 4 types of links, copy the 4th/last one and paste it here.

[Alabang BRZ]

Folks, anyone know where I can get my car foiled?

[NIKDENG]

Originally Posted by Alabang BRZ

Folks, anyone know where I can get my car foiled?

@Alabang BRZ,

If you want high end, high quality, with warranty go with FoilaCar Manila at the Fort:

Address: 1A Karport, 32nd Ave. Bonifacio Global City, Taguig City
Tel: 02 403 3145

otherwise, almost any shop in Banawe with tinting service offers vinyl wrapping.