Visconti Tuning - Latest BRZ Flash Info - Page 250 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Calum · 11-01-2012, 04:52 PM

For the Canadian guys, I filled up yesterday and confirmed that my cluster won't show anything past 50% on the fuel consumption gauge. It's my guess that the cluster would need to be modified to go higher then that. 50 litres per 100 kms is worse fuel consumption then most tractor trailers get fully loaded. 40 would be about right for tractor trailer. I imagine that the engineers thought 50 would be way higher then was required and just didn't program the signal conversion for anything past that.

Calum · 11-01-2012, 04:54 PM

Quote:

Originally Posted by Visconti

BTW - for any of you at Sema.. EcuTek is here !!!

If you get a second, can you post a pic of the EcuTek booth?

Visconti · 11-01-2012, 08:37 PM

Still working on pushing updates.. Very time consuming!!!

Quote:

Originally Posted by Calum

If you get a second, can you post a pic of the EcuTek booth?

No booty, just walking around.

audioenvy · 11-01-2012, 09:16 PM

Quote:

Originally Posted by Visconti

No booty, just walking around.

If you see any booty, please post photos.

Calum · 11-01-2012, 09:39 PM

Quote:

Originally Posted by Visconti

No booty, just walking around.

Damn I was looking forward to seeing that booty.

I fear this could get out of hind quickly

brichard0625 · 11-01-2012, 09:59 PM

Did some dataloging for the first time since i have a laptop now. This is my custom intake on a 2nd gear pull. The green is the afr not sure if that afr is crazy or not. it run's 14's for a little and then drops to 12.5-12.9 all the way thru...gonna see if john see's anything he can adjust and gives me feedback if its worth it or not. Still loving this tune by the way

BAE · 11-01-2012, 11:08 PM

Quote:

Originally Posted by Visconti

Yes my vendor subscription did not auto renew for some reason.

I'm trying hard to keep up with the form guys

Just seems like it never ends.

BUT - I would say at 100% safe to flash now.

Important - Do not use any file that contains 10826 or OLDER.

-John

When do you plan to send an updated file to everyone that have older one?

xjohnx · 11-01-2012, 11:11 PM

Quote:

Originally Posted by BAE

When do you plan to send an updated file to everyone that have older one?

sounds like soon.

Quote:

Originally Posted by Visconti

Still working on pushing updates.. Very time consuming!!!

vubaru · 11-02-2012, 03:18 PM

Is Ecutek still at SEMA today (Friday)?

Symbiont · 11-02-2012, 04:50 PM

Quote:

Originally Posted by Visconti

Still working on pushing updates.. Very time consuming!!!

Thanks, John. Looking forward to trying this flash people are talking about!

Gregory Gawaran · 11-02-2012, 07:25 PM

John, Have you been able to contact EcuTek about my license? Received my Cable a couple days ago, did not have a license out of the box.

Yruyur · 11-03-2012, 01:27 PM

Sucks being in this stock tune for a few weeks now and not able to flash back.

Sent from my flux capacitor using Taptalk

xjohnx · 11-03-2012, 01:28 PM

Dude...

Yruyur · 11-03-2012, 01:38 PM

I know. I got spoiled by the tune. It is interesting to see the torque dip again and to see how the car used to be.

Sent from my flux capacitor using Taptalk

11-01-2012, 09:59 PM	#3492
brichard0625 Senior Member Join Date: Jun 2012 Drives: 2013 Scion Frs(Scarlet) Location: Bronx, NY Posts: 907 Thanks: 172 Thanked 386 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Did some dataloging for the first time since i have a laptop now. This is my custom intake on a 2nd gear pull. The green is the afr not sure if that afr is crazy or not. it run's 14's for a little and then drops to 12.5-12.9 all the way thru...gonna see if john see's anything he can adjust and gives me feedback if its worth it or not. Still loving this tune by the way __________________

11-03-2012, 01:27 PM	#3498
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	Sucks being in this stock tune for a few weeks now and not able to flash back. Sent from my flux capacitor using Taptalk __________________

11-03-2012, 01:38 PM	#3500
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	I know. I got spoiled by the tune. It is interesting to see the torque dip again and to see how the car used to be. Sent from my flux capacitor using Taptalk __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 02:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) -- General Topics	0	05-24-2012 10:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 07:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) -- General Topics	130	09-01-2011 01:42 PM

11-01-2012, 04:52 PM	#3487
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 4,865 Thanks: 5,058 Thanked 2,867 Times in 1,499 Posts Mentioned: 82 Post(s) Tagged: 1 Thread(s)	For the Canadian guys, I filled up yesterday and confirmed that my cluster won't show anything past 50% on the fuel consumption gauge. It's my guess that the cluster would need to be modified to go higher then that. 50 litres per 100 kms is worse fuel consumption then most tractor trailers get fully loaded. 40 would be about right for tractor trailer. I imagine that the engineers thought 50 would be way higher then was required and just didn't program the signal conversion for anything past that.

11-02-2012, 03:18 PM	#3495
vubaru Now with Boost! Join Date: Aug 2012 Drives: 2013 SWP BRZ Ltd. Location: Bay Area, CA Posts: 415 Thanks: 281 Thanked 424 Times in 257 Posts Mentioned: 24 Post(s) Tagged: 0 Thread(s)	Is Ecutek still at SEMA today (Friday)?

11-02-2012, 07:25 PM	#3497
Gregory Gawaran Senior Member Join Date: Oct 2011 Drives: 2018 Subaru BRZ tS Location: Anna, TX Posts: 142 Thanks: 4 Thanked 24 Times in 12 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	John, Have you been able to contact EcuTek about my license? Received my Cable a couple days ago, did not have a license out of the box.

11-03-2012, 01:28 PM	#3499
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,716 Times in 1,031 Posts Mentioned: 45 Post(s) Tagged: 3 Thread(s)	Dude...

User Name		Remember Me?
Password