|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
02-22-2020, 12:41 AM | #1 |
Junior Member
Join Date: Nov 2019
Drives: 2015 Scion FR-S
Location: Dayton, OH
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Ebay CAI with K&N filter. Thoughts?
Hey Y'all i got Cool air intake from Facebook for $50
It came with the Tube that goes from the Throttle Body to the Filter but the filter looked in terrible condition so I went and got a K&N Filter RC-4630XD from Amazon and it came in the next day. I Assembled it on the car and it sounds beautiful. So my question is WILL that tube cause any problems in the future because its a ebay product? it seems pretty solid with no cracks or holes on the welds. Or does it have to do with the tube it self? Because the filter is the same as the K&N Typhoon Intake System on Ft86factory listed Below (Replacement Filter) And also i heard that i cant just put the CAI in because i will need a tune to see real performance? Im full Stock so im not really looking for "REAL" performance yet, i just want it to sound nice a little which it does. Can i have yall insight in this? Thanks <3 I looked around for the CAI i got and it was from Ebay https://ebay.to/2Ve34gm I got the K&N RC-4630XD Filter from Amazon https://amzn.to/3c3qyLd Where i got the Replacement filter info from: K&N Typhoon Intake System https://bit.ly/32lwydx |
02-22-2020, 02:17 AM | #2 |
Senior Member
Join Date: Jan 2018
Drives: 2013 frs red
Location: South Florida
Posts: 3,517
Thanks: 2,520
Thanked 3,088 Times in 1,654 Posts
Mentioned: 6 Post(s)
Tagged: 1 Thread(s)
|
You'll probably lose power due to heat soak. I wouldn't use it but it shouldn't damage anything
|
02-22-2020, 02:47 AM | #3 |
Junior Member
Join Date: Nov 2019
Drives: 2015 Scion FR-S
Location: Dayton, OH
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
02-22-2020, 03:31 AM | #4 |
Senior Member
Join Date: Jan 2018
Drives: 2013 frs red
Location: South Florida
Posts: 3,517
Thanks: 2,520
Thanked 3,088 Times in 1,654 Posts
Mentioned: 6 Post(s)
Tagged: 1 Thread(s)
|
Heat shield is steel?
|
02-22-2020, 04:06 AM | #5 |
Senior Member
Join Date: Aug 2018
Drives: 2002 VX Commodore SS LS1 Auto
Location: Sydney
Posts: 2,203
Thanks: 500
Thanked 2,185 Times in 1,111 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
LOL
__________________
Disclaimer: This post represents the official views of the voices in my head at the time of posting.
http://www.ft86club.com/forums/showthread.php?t=133311 I'm only here for the biscuits |
The Following 2 Users Say Thank You to 86MLR For This Useful Post: | DarkPira7e (02-22-2020), NoHaveMSG (02-22-2020) |
02-22-2020, 05:00 AM | #6 |
LMGTFY
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,646 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
It'll heat soak, cause the engine to run lean, melt a piston, and send one through the side of your block.
Then off course, I don't know how to search either. |
02-22-2020, 05:58 AM | #7 |
Senior Member
Join Date: Aug 2018
Drives: 2002 VX Commodore SS LS1 Auto
Location: Sydney
Posts: 2,203
Thanks: 500
Thanked 2,185 Times in 1,111 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
Looks likeevery other $500 brand name intake.....
__________________
Disclaimer: This post represents the official views of the voices in my head at the time of posting.
http://www.ft86club.com/forums/showthread.php?t=133311 I'm only here for the biscuits |
02-22-2020, 07:28 AM | #8 |
Because compromise ®
Join Date: Jan 2012
Drives: Red Herring
Location: australia
Posts: 7,711
Thanks: 3,984
Thanked 9,318 Times in 4,120 Posts
Mentioned: 60 Post(s)
Tagged: 0 Thread(s)
|
Would it make a difference if the piston exited through the top side or the bottom side? I'm thinking it would be better if it blew through the bottom side because the tray would catch a lot of the gunk but if it exited through the top you would have to use more degreaser.
But thinking about this some more if the car was parked on its nose it would become a case of exiting through either the front side or the back side which is what the hemorrhoid said.
__________________
My car is completely stock except for all the mods.
|
The Following User Says Thank You to Captain Snooze For This Useful Post: | NoHaveMSG (02-22-2020) |
02-22-2020, 07:48 AM | #9 |
TRACKBREAD
Join Date: Mar 2016
Drives: 2013 BRZ
Location: Florida
Posts: 3,929
Thanks: 2,660
Thanked 4,024 Times in 1,895 Posts
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
|
No intake for this platform makes more power. The stock cold air intake was very well designed. Even the gains of the 2 best performers, the TRD and grimmspeed intakes, are low. Your best bet is to get a drop in panel filler and a mishimoto style intake elbow. |
02-22-2020, 08:46 AM | #10 |
Rust bucket enthusiast
Join Date: Feb 2017
Drives: 2013 Turbo Firestorm FRS
Location: Vermont
Posts: 3,926
Thanks: 3,196
Thanked 4,093 Times in 2,044 Posts
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
|
You'll gain more by removing the intake altogether. Shaves at least 10lbs. Fresh unfiltered air right into the throttle body. Filters and tubes slow the air DOWN. you want to speed that shit up bro.
|
02-22-2020, 11:24 AM | #11 |
Senior Member
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,333
Thanks: 696
Thanked 2,085 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
|
Yeah, and dust/sand that will get in will hone cylinders like no manufacturer ever will. Engine will be so smooth all 2K miles it will last.
|
02-22-2020, 12:14 PM | #12 |
Senior Member
Join Date: Dec 2012
Drives: FR-S Whiteout
Location: California
Posts: 2,863
Thanks: 1,808
Thanked 790 Times in 611 Posts
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
|
Dont let these guys scare you.. it will work but it will run like shit without a tune. At least it will sound cool.
__________________
Intent > Content
cowardice is the mother of cruelty. |
02-22-2020, 02:31 PM | #13 |
Because compromise ®
Join Date: Jan 2012
Drives: Red Herring
Location: australia
Posts: 7,711
Thanks: 3,984
Thanked 9,318 Times in 4,120 Posts
Mentioned: 60 Post(s)
Tagged: 0 Thread(s)
|
In all seriousness the best thing to do is route piping from the air conditioning ducts inside the car to force cold air into the intake. You have to make a small mod to increase the fan speed proportionally to the throttle position but there are kits for that.
One of the benefits of this system is you can adjust the power output by adjusting the temperature thermostat.
__________________
My car is completely stock except for all the mods.
|
02-22-2020, 02:39 PM | #14 | |
Senior Member
Join Date: Aug 2018
Drives: 2002 VX Commodore SS LS1 Auto
Location: Sydney
Posts: 2,203
Thanks: 500
Thanked 2,185 Times in 1,111 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
|
Quote:
When NA I did have the Mishimoto tube, more so to remove the noise tube neatly, and a drop in K&N filter. My point was more about how much the aftermarket charge for their CAI, which weirdly, give the same gains as a drop in and snorkel mod. Consumers will consume.
__________________
Disclaimer: This post represents the official views of the voices in my head at the time of posting.
http://www.ft86club.com/forums/showthread.php?t=133311 I'm only here for the biscuits |
|
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thoughts on eBay Oil Cooler kits? | @Art_Mighty | Engine, Exhaust, Transmission | 15 | 04-10-2014 08:38 AM |
Thoughts on eBay frontlip/spoiler/side skirts | Evo2Brz | Cosmetic Modification (Interior/Exterior/Lighting) | 3 | 03-29-2014 03:36 PM |
idk how i feel about this. EBay fogs? thoughts | chriscross_tnt | Cosmetic Modification (Interior/Exterior/Lighting) | 3 | 08-30-2013 08:47 PM |
Best Ebay FRS/BRZ Oil Filter Deal, EVER! | developer | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 20 | 02-06-2013 07:13 AM |
Idiot on EBAY selling their used BRZ filter.. | FTEIGHTSIX | Off-Topic Lounge [WARNING: NO POLITICS] | 6 | 09-18-2012 11:31 AM |