1/4 Mile times - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FRS Justin · 04-11-2015, 02:41 AM

Start the clock I will be back in 2 weeks to finish what I started........

[ame="https://www.youtube.com/watch?v=CCFOM4fuWSM"]13.58 sec. Delicious Tuning and PPE Header N/A FRS Breaks 100mph in the 1/4 mi - YouTube[/ame]

FRS Justin · 04-11-2015, 05:10 AM

Quote:

Originally Posted by jester04

Yeah i know, that is why i say if i get better 60ft it should improve. With the 14.68@ stock power level with a 2.3 60ft. It should be closer to a 14.0 with a decent launch and a 2.0 60ft

I think the best 60 time you will get is a 2.2 to 2.15 with your setup, try launching with out the ebrake if the track is flat it wont roll thats probably a 2.2 to 2.1 60 right there also try feathering the rpm higher with a slower release of the clutch with your setup it will help pm me for suspension mods in the video above I release the clutch at 7500 rpm and run a 1.8 60
any way I can help I sure will good luck

itsjustdavep · 04-11-2015, 08:01 AM

Quote:

Originally Posted by FRS Justin

I think the best 60 time you will get is a 2.2 to 2.15 with your setup, try launching with out the ebrake if the track is flat it wont roll thats probably a 2.2 to 2.1 60 right there also try feathering the rpm higher with a slower release of the clutch with your setup it will help pm me for suspension mods in the video above I release the clutch at 7500 rpm and run a 1.8 60
any way I can help I sure will good luck

holy sht dude. I'm all ears

wparsons · 04-11-2015, 08:41 AM

Skip the water box and burnout unless you're running tires that need heat. Stock tires will launch worse after a full burnout. Just give them a quick spin to throw any debris off them.

itsjustdavep · 04-11-2015, 10:11 AM

Quote:

Originally Posted by FRS Justin

Start the clock I will be back in 2 weeks to finish what I started........

So tune e85 and a header? Did you strip the car out?

Dipstik-sportech · 04-11-2015, 10:45 AM

He has to be running a drag radial to be able to dump the clutch at the rev limiter and only chirp the tires. Also running no lift to shift as well by the sounds of it.

FRS Justin · 04-13-2015, 01:08 AM

Quote:

Originally Posted by itsjustdavep

So tune e85 and a header? Did you strip the car out?

Full interior, just removed the spare and tools..

FRS Justin · 04-13-2015, 01:09 AM

Quote:

Originally Posted by Dipstik-sportech

He has to be running a drag radial to be able to dump the clutch at the rev limiter and only chirp the tires. Also running no lift to shift as well by the sounds of it.

Yes Im running hoosier drag radials and flat foot shifting but did not dump the clutch that seems to only hurt. I released it quickly but controlled.

sachu · 04-13-2015, 01:15 PM

Vit Tuned E85 bolt ons doing a 14.14 run

Skunk2 race header
Skunk2 intake
Perrin 2.5 overpipe
HKS catless resonated front pipe
Perrin 3 inch exhaust.
E85
Ecutek based VIT Tune
Stock wheels and tires

I haven't taken mine out on the track yet.

jester04 · 04-15-2015, 03:10 AM

Quote:

Originally Posted by itsjustdavep

@jester04 yo bro. My names Dave. Soon as I get my oil leak fixed we'll have to roll out over there one night

Sounds good Dave! Just PM me so we can exchange Info!

itsjustdavep · 04-15-2015, 12:16 PM

Quote:

Originally Posted by FRS Justin

Yes Im running hoosier drag radials and flat foot shifting but did not dump the clutch that seems to only hurt. I released it quickly but controlled.

areou running a full exhaust after the header? or just the PPE header and overpipe?

FRS Justin · 04-16-2015, 12:08 PM

Quote:

Originally Posted by itsjustdavep

areou running a full exhaust after the header? or just the PPE header and overpipe?

Im running a N1 invidia with a mid pipe and a PPE with the merge collector, Delicious tuning Flex fuel setup with a stage 2 E85 tune, and a Airaid cold air intake.

chaoscentral · 04-16-2015, 01:07 PM

So I took my car up to the drags last night. Track prep was horrible, managed a best of 15.0@93mph. Was so close to those 14s I could taste them.

Will have a pic of the slip up when I get home from work. The track was so bad I managed to beat a 2015 Mustang Ecoboost which should have beat me by a good margin.

My car is bone stock. Crappy all season tires and all

sachu · 04-26-2015, 01:53 AM

First time ever at the drag strip

The best time I managed was a 14.7

Stock tires

04-11-2015, 10:45 AM	#216
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s) Tagged: 0 Thread(s)	He has to be running a drag radial to be able to dump the clutch at the rev limiter and only chirp the tires. Also running no lift to shift as well by the sounds of it. __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

04-13-2015, 01:15 PM	#219
sachu Senior Member Join Date: May 2014 Drives: rocketship Location: Rip City Posts: 385 Thanks: 124 Thanked 108 Times in 85 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Vit Tuned E85 bolt ons doing a 14.14 run Skunk2 race header Skunk2 intake Perrin 2.5 overpipe HKS catless resonated front pipe Perrin 3 inch exhaust. E85 Ecutek based VIT Tune Stock wheels and tires I haven't taken mine out on the track yet. __________________ Shredical Photography Shredical build thread

04-26-2015, 01:53 AM	#224
sachu Senior Member Join Date: May 2014 Drives: rocketship Location: Rip City Posts: 385 Thanks: 124 Thanked 108 Times in 85 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	First time ever at the drag strip The best time I managed was a 14.7 Stock tires Attached Images __________________ Shredical Photography Shredical build thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scion's free 2 year/25K mile maintenance plan?	whtchocla7e	Scion FR-S / Toyota 86 GT86 General Forum	25	06-06-2012 03:26 PM
La Times reviews BRZ	Sport-Tech	BRZ First-Gen (2012+) -- General Topics	7	05-18-2012 11:11 AM
He lives his life 1 quarter mile at a time	ucla bruin	Other Vehicles & General Automotive Discussions	9	12-21-2011 07:04 PM
$95 Track day at Willow Springs- Horse Thief Mile-Oct 16th	Louie	Southern California	1	10-11-2011 12:31 AM
$85 Track day at Willow Springs- Horse Thief Mile - April 2-3rd in SoCal	Louie	Southern California	2	03-20-2011 05:17 AM

04-11-2015, 02:41 AM	#211
FRS Justin Senior Member Join Date: May 2014 Drives: 2013 Asphalt FRS Location: San Antonio Posts: 994 Thanks: 693 Thanked 695 Times in 417 Posts Mentioned: 22 Post(s) Tagged: 1 Thread(s)	Start the clock I will be back in 2 weeks to finish what I started........ [ame="https://www.youtube.com/watch?v=CCFOM4fuWSM"]13.58 sec. Delicious Tuning and PPE Header N/A FRS Breaks 100mph in the 1/4 mi - YouTube[/ame]

04-16-2015, 01:07 PM	#223
chaoscentral Member Join Date: Dec 2014 Drives: 2013 Scion FR-S Series 10 Location: Danvers, Mass Posts: 94 Thanks: 16 Thanked 50 Times in 35 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	So I took my car up to the drags last night. Track prep was horrible, managed a best of 15.0@93mph. Was so close to those 14s I could taste them. Will have a pic of the slip up when I get home from work. The track was so bad I managed to beat a 2015 Mustang Ecoboost which should have beat me by a good margin. My car is bone stock. Crappy all season tires and all

User Name		Remember Me?
Password