FRS fogs using BRZ stalk - Page 12 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

bpracer · 03-21-2013, 10:59 AM

Quote:

Originally Posted by Chillz

Have you confirmed that the BRZ premium stalk doesn't have the "auto" switch?

I'm going by what somebody else posted. If true great, if not, well, it should still work. I'll know next week.

Product Name: BRZ WIPER STALK FOR PREMIUM MODEL - WITH FOG LIGHT
SWITCH
Item#: 83115FJ070
Unit Price: $60.00

Sco2355 · 03-21-2013, 11:02 AM

Quote:

Originally Posted by HRTROB

If you do find it, kindly post the part number here

thanks!

No doubt, will do!

pascalbrax · 03-21-2013, 11:42 AM

I'll just leave this here.

Quote:

Originally Posted by nigel-jdmparts

No, you cannot have auto headlights work. Because you don't have the sensor on the FRS.

Sco2355 · 03-21-2013, 11:50 AM

Quote:

Originally Posted by pascalbrax

I'll just leave this here.

While true, it can still be done. The FRS does not have the parts, but I do have the part numbers for all the parts needed. After doing this fog install what I decided to do was purchase the correct wiring harness and slowly buy the pieces needed to make it all happen. This way it's PnP.

iketiak · 03-21-2013, 12:34 PM

Quote:

Originally Posted by Sco2355

While true, it can still be done. The FRS does not have the parts, but I do have the part numbers for all the parts needed. After doing this fog install what I decided to do was purchase the correct wiring harness and slowly buy the pieces needed to make it all happen. This way it's PnP.

Is there a part number for a O.E.M foglight harness?

Sco2355 · 03-21-2013, 12:52 PM

Quote:

Originally Posted by iketiak

Is there a part number for a O.E.M foglight harness?

No there isn't a separate harness. It's made into the main harness.

iketiak · 03-21-2013, 01:02 PM

Quote:

Originally Posted by Sco2355

No there isn't a separate harness. It's made into the main harness.

I would be very interested in finding out the P/N for the euro stalk as well. will you be doing a revised DIY guide once you get all parts?

Sco2355 · 03-21-2013, 01:28 PM

Yep.

Willsonk · 03-21-2013, 05:01 PM

Is anyone using the Nigel JDM wiring harness and the BRZ stalk yet??? What's your results??

Sco2355 · 03-21-2013, 05:16 PM

Why would you buy the harness and the stalk?

civicdrivr · 03-21-2013, 05:20 PM

Quote:

Originally Posted by Willsonk

Is anyone using the Nigel JDM wiring harness and the BRZ stalk yet??? What's your results??

I'm not a wiring wizard, but I believe this is exactly what has been discussed in this thread over the past few days. Nigel's harness is a positive trigger setup, the stalk is a negative trigger setup. Its a waste of money to buy Nigel's harness if you plan on running the stalk since you can build your own harness for a fraction of the cost.

The diagrams have been posted over the past few pages, just get the supplies and run some wires.

Sent from my Nexus 4

Willsonk · 03-22-2013, 03:09 AM

Sco2355 ....... All the items were ordered before diagrams and all the added info.

b$m1th91 · 03-22-2013, 03:35 AM

Quote:

Originally Posted by HRTROB

No problem! Let us know how how your install goes!

So with curiosity i decided to take the button apart so i could see the circuit board. It seems that from looking at it, ground is separate from the other 3 so wouldn't tapping into the white work? Here is a pic of it and a diagram showing where the wires connect for better understanding.

HRTROB · 03-22-2013, 04:49 AM

Quote:

Originally Posted by b$m1th91

So with curiosity i decided to take the button apart so i could see the circuit board. It seems that from looking at it, ground is separate from the other 3 so wouldn't tapping into the white work? Here is a pic of it and a diagram showing where the wires connect for better understanding.

Nope. As I said earlier, that ground is NOT A SWITCHED GROUND. It's for grounding the light inside the switch.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who here has LEDs in their fogs/DRLs in their GT?	RZ86	Cosmetic Modification (Interior/Exterior/Lighting)	10	03-30-2013 10:54 PM
Fogs wiring; Will this work?	Khánh	Cosmetic Modification (Interior/Exterior/Lighting)	12	02-16-2013 12:44 PM
BRZ HID Bulb + HID Fogs	delusional	DIY (Do-It-Yourself) Guides	4	02-05-2013 05:09 AM
new Camry fogs fit the frs??	hislargeness	Cosmetic Modification (Interior/Exterior/Lighting)	3	09-26-2012 03:20 AM
for everyone thinking of using rear fogs	xpicer	Cosmetic Modification (Interior/Exterior/Lighting)	4	07-04-2012 12:53 AM

03-21-2013, 05:01 PM	#163
Willsonk Senior Member Join Date: May 2012 Drives: Scion FR-S Asphalt AT & XB Location: Virginia Beach,VA Posts: 123 Thanks: 15 Thanked 30 Times in 21 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	Is anyone using the Nigel JDM wiring harness and the BRZ stalk yet??? What's your results??

03-22-2013, 03:09 AM	#166
Willsonk Senior Member Join Date: May 2012 Drives: Scion FR-S Asphalt AT & XB Location: Virginia Beach,VA Posts: 123 Thanks: 15 Thanked 30 Times in 21 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	Sco2355 ....... All the items were ordered before diagrams and all the added info.

User Name		Remember Me?
Password