P&L Header prototype - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

kidgogeta · 02-13-2013, 07:01 PM

Quote:

Originally Posted by Hawaiian

I'm currently running the full P&L header back with a high flow cat. It's a 2.5" system.

do you know how loud the P&L is compared to the SRT? cuz this looks like a sweet upgrade

Hawaiian · 02-13-2013, 07:27 PM

Quote:

Originally Posted by kidgogeta

do you know how loud the P&L is compared to the SRT? cuz this looks like a sweet upgrade

Afiak the P&L is quieter than the SRT, but I haven't heard one in person to compare.

Hawaiian · 02-13-2013, 07:31 PM

Quote:

Originally Posted by industrial

Probable something to do with emissions and tuning the engine to keep the cats happy. These results are better than I expected for the midrange for sure. It's almost tiny-turbo like midrange. Too bad it still kind of falls on it's face up top.

Well, the tune was, unfortunately canned, and not customized for the new header. Hopefully we get some really nice results on friday with the new tune.

CircuitJerk · 02-13-2013, 07:32 PM

Quote:

Originally Posted by kidgogeta

do you know how loud the P&L is compared to the SRT? cuz this looks like a sweet upgrade

I'd like to do a side by side comparo with @Hawaiian.
I have the SRT catback with the P&L overpipe and catless midpipe, so basically a catless headerback. I know mine is probably as loud now, or probably even louder still.
I love the sound but it's getting to be too much. The P&L rear section is becoming more and more attractive for me.

Hawaiian · 02-13-2013, 07:49 PM

Quote:

Originally Posted by CircuitJerk

I'd like to do a side by side comparo with @Hawaiian.
I have the SRT catback with the P&L overpipe and catless midpipe, so basically a catless headerback. I know mine is probably as loud now, or probably even louder still.
I love the sound but it's getting to be too much. The P&L rear section is becoming more and more attractive for me.

I'll be at the shop friday am if you want to swing by.

CircuitJerk · 02-13-2013, 07:57 PM

I may stop by to check yours out, but I don't think I'll have the FR-S that day, unfortunately. Probably too soon.

industrial · 02-13-2013, 11:37 PM

Quote:

Originally Posted by Hawaiian

Well, the tune was, unfortunately canned, and not customized for the new header. Hopefully we get some really nice results on friday with the new tune.

I hope so man! So far I haven't seen anything outside of FI that helps maintain the power up top though.

sw20kosh · 02-13-2013, 11:58 PM

Nameless header +tune also got rid of the torque dip!!!

Ingen · 02-14-2013, 08:53 AM

I would love to see a catted header that can achieve similar dip-eliminating torque-monster results as these!

P&L Motorsports · 02-15-2013, 12:20 PM

The Hawaiin has arrived, updates to follow.

-Dylan@P&L

naikaidriver · 02-15-2013, 12:44 PM

Thanks so much for keeping us all posted guys!

Scott

Hawaiian · 02-15-2013, 01:15 PM

If only there was a way to get more out of this car...

FA20Club at work

P&L Motorsports · 02-15-2013, 06:37 PM

Quick update from the day:

First and foremost, big thanks to Hawaiian, and Tony at FA20Club. R&D is usually a pain, but it helps when the parties involved are all competent and helpful. So, thanks again guys.

Onto the day... After several dyno pulls and back-and-forths for new tunes, we were 1.09HP away from 200. Next time. However it did still put down some lovely numbers.

Also, some valid concerns were raised while doing the testing. The major one I wanted to cover is STX compatibility. We are happy to say that we will offer an STX friendly catted version of the Header for all you SCCA AX'ers out there.

-Dylan@P&L

Edit: @Hawaiian -- We have your laptop charger.

Simmons · 02-15-2013, 06:54 PM

Quote:

Originally Posted by P&L Motorsports

Quick update from the day:

First and foremost, big thanks to Hawaiian, and Tony at FA20Club. R&D is usually a pain, but it helps when the parties involved are all competent and helpful. So, thanks again guys.

Onto the day... After several dyno pulls and back-and-forths for new tunes, we were 1.09HP away from 200. Next time. However it did still put down some lovely numbers.

Also, some valid concerns were raised while doing the testing. The major one I wanted to cover is STX compatibility. We are happy to say that we will offer an STX friendly catted version of the Header for all you SCCA AX'ers out there.

-Dylan@P&L

Edit: @Hawaiian -- We have your laptop charger.

Looks good, you don't need a catted header for STX, you can use a HFC in the front pipe instead.

Simmons

02-14-2013, 08:53 AM	#65
Ingen Senior Member Join Date: Oct 2012 Drives: Ultramarine FR-S 6MT Location: Columbus, OH Posts: 525 Thanks: 349 Thanked 204 Times in 121 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I would love to see a catted header that can achieve similar dip-eliminating torque-monster results as these! __________________ Car Received: 10/18. Break in ended: 10/28 Goal: Openflash UEL headers, Stage II 93 oct, TRD intake, arm rest :P

02-15-2013, 12:44 PM	#67
naikaidriver Senior Member Join Date: Aug 2012 Drives: 2013 Scion FR-S AT Asphalt Location: Lynnwood, WA Posts: 770 Thanks: 145 Thanked 673 Times in 289 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Thanks so much for keeping us all posted guys! Scott __________________

02-15-2013, 01:15 PM	#68
Hawaiian That guy Join Date: Feb 2012 Drives: Ultramarine mt FR-S Location: chicago Posts: 2,370 Thanks: 692 Thanked 1,389 Times in 730 Posts Mentioned: 71 Post(s) Tagged: 0 Thread(s)	If only there was a way to get more out of this car... FA20Club at work __________________ Ultramarine mt FR-S P&L stage 1 turbo Prime Motoring Flex fuel Jr Tuned 506whp @17psi (e73)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
StopTech BBK Prototype Install	benjoke	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	22	03-31-2013 11:31 AM
WGP Looking for a BRZ For LS Swap Prototype	Doug@WGP	Announcements, Contests, Giveaways	25	10-10-2012 05:20 PM
How come Toyota has 2 prototype and Subaru has none?	moda3	BRZ First-Gen (2012+) -- General Topics	30	09-06-2011 01:39 PM
Different wheels on the prototype	ft86cbx	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	17	06-20-2011 05:00 PM
Wheels on the Prototype	joshuo	Scion FR-S / Toyota 86 GT86 General Forum	13	11-03-2009 07:37 PM

02-13-2013, 07:57 PM	#62
CircuitJerk Pull my finger... Join Date: Dec 2011 Drives: Silver Scion Slushbox Location: Illinois Posts: 996 Thanks: 476 Thanked 367 Times in 226 Posts Mentioned: 26 Post(s) Tagged: 0 Thread(s)	I may stop by to check yours out, but I don't think I'll have the FR-S that day, unfortunately. Probably too soon.

02-13-2013, 11:58 PM	#64
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	Nameless header +tune also got rid of the torque dip!!!

02-15-2013, 12:20 PM	#66
P&L Motorsports Senior Member Join Date: Jun 2012 Drives: '13 Turbo BRZ (AT) & '13 FRS Location: Lisle, IL Posts: 1,323 Thanks: 158 Thanked 355 Times in 157 Posts Mentioned: 44 Post(s) Tagged: 0 Thread(s)	The Hawaiin has arrived, updates to follow. -Dylan@P&L

02-15-2013, 06:37 PM	#69
P&L Motorsports Senior Member Join Date: Jun 2012 Drives: '13 Turbo BRZ (AT) & '13 FRS Location: Lisle, IL Posts: 1,323 Thanks: 158 Thanked 355 Times in 157 Posts Mentioned: 44 Post(s) Tagged: 0 Thread(s)	Quick update from the day: First and foremost, big thanks to Hawaiian, and Tony at FA20Club. R&D is usually a pain, but it helps when the parties involved are all competent and helpful. So, thanks again guys. Onto the day... After several dyno pulls and back-and-forths for new tunes, we were 1.09HP away from 200. Next time. However it did still put down some lovely numbers. Also, some valid concerns were raised while doing the testing. The major one I wanted to cover is STX compatibility. We are happy to say that we will offer an STX friendly catted version of the Header for all you SCCA AX'ers out there. -Dylan@P&L Edit: @Hawaiian -- We have your laptop charger.

User Name		Remember Me?
Password