Visconti Tuning - Latest BRZ Flash Info

[GC GTS Aero Kit]

Im just spewing John isn't available in Australia, thought about an Aussie holiday John?? Im sure there would be a few people here ready for flash tunes haha

[xjohnx]

Originally Posted by vubaru

I'll go and check and update this post with the version [its v. 1.04] but it is the same version John's been distributing to the people above me on the list. I'm nobody special

Ahh, thanks.

Hey @Visconti - I'm still on 1.02. What has changed since then?

[KamalT]

Originally Posted by GC GTS Aero Kit

Im just spewing John isn't available in Australia, thought about an Aussie holiday John?? Im sure there would be a few people here ready for flash tunes haha

Mines is somewhere in Australia at the moment. It should arrive in a few days.

John advised that it should work in Australia.

But I like your thinking...

John you need a holiday from all the hard work you are doing, why don't you come to Australia for a holiday

p.s. remember to bring your bag of tricks as well

[Visconti]

Originally Posted by KamalT

Mines is somewhere in Australia at the moment. It should arrive in a few days.

John advised that it should work in Australia.

But I like your thinking...

John you need a holiday from all the hard work you are doing, why don't you come to Australia for a holiday

p.s. remember to bring your bag of tricks as well

I can do that..

Just get a group of people together

John

Originally Posted by xjohnx

Ahh, thanks.

@Visconti - I'm still on 1.02. What has changed since then?

Nothing worth talking about

I have a few different revisions out there but once I get the data I need I'll send everyone a update..

[xjohnx]

Originally Posted by Visconti

Nothing worth talking about

I have a few different revisions out there but once I get the data I need I'll send everyone a update..

10-4, sounds good. Thanks for all your work on this.

[Visconti]

Originally Posted by Yruyur

Attempted to do the flash , thanks John and Josh but encountered issues with the newer ECU version I got to fix my CEL issues 2k miles ago. John is looking at the dump file and will update the thread, thanks again for the help!

Sent from my PH44100 using Tapatalk 2

EcuTek just added support to your ECU.

Please flash in the stuff I gave you the other day.

It's going to be at least a week before I can convert your tune into that new dealer flash update.

Next time you connect to your ECU - don't dump ECU - but READ ROM to save your ECU - just to be safe

Thanks

John

[GC GTS Aero Kit]

Originally Posted by Visconti

I can do that..

Just get a group of people together

John

John.....Definately something I can organise I shall start a group buy and see what the general consensus is

[Visconti]

Originally Posted by GC GTS Aero Kit

John.....Definately something I can organise I shall start a group buy and see what the general consensus is

Should definitely be after i get my cables in

[Yruyur]

Originally Posted by Visconti

EcuTek just added support to your ECU.

Please flash in the stuff I gave you the other day.

It's going to be at least a week before I can convert your tune into that new dealer flash update.

Next time you connect to your ECU - don't dump ECU - but READ ROM to save your ECU - just to be safe

Thanks

John

So I can still flash using the other version you sent? I think it was giving us a compatibility error if we manually selected the car since it didn't auto detect it.



Sent from my PH44100 using Tapatalk 2

[Visconti]

Originally Posted by Yruyur

So I can still flash using the other version you sent? I think it was giving us a compatibility error if we manually selected the car since it didn't auto detect it.



Sent from my PH44100 using Tapatalk 2

They added support for the new rom.

Run the ecutek software update and it'll download a new version of the software

John

[Visconti]

Alrighty..

Just sent out two more tunes

[GC GTS Aero Kit]

Just went for a strap in my Evo 9 on E85 .....ahhh dusted 911 GT2RS Feeling chuffed

[Hawaiian]

Originally Posted by Visconti

Wow - so Toyota north America came down to look / fix your car and they didnt notice my STG1 flash or give you any problems ?

I was talking to John while my car was locked away at the dealer for over a week due to my concern with the flash not being reverted back to stock prior to the whole ordeal.

You see, the original repair was supposedly going to be a quick in, and out gateway ECU swap, but sometimes things go wrong.

http://www.ft86club.com/forums/forumdisplay.php?f=72

I did however know the tech working on my car, and he was aware of the tune, so I asked him of he saw anything different. To his knowledge using the techstream he didn't see anything out of the ordinary.

As John said, there are no red flags to alert dealers stg1 has been done to your car, even without reflashing to stock.

[Opposed]

John, after all of this dust settles, do you want to see logs just to make sure everything is working properly?

[Visconti]

Originally Posted by Opposed

John, after all of this dust settles, do you want to see logs just to make sure everything is working properly?

You can start sending them in

[xjohnx]

Originally Posted by Visconti

You can start sending them in

Email is the preferred method for datalog submission, i assume?

Should we be driving it any special way while logging (beat on it, take it easy, mixed use)? How long should we datalog to make sure you have enough data?

[Visconti]

Originally Posted by xjohnx

Email is the preferred method for datalog submission, i assume?

Should we be driving it any special way while logging (beat on it, take it easy, mixed use)? How long should we datalog to make sure you have enough data?

Yup , doesn't matter

[EvoXDD]

Originally Posted by Visconti

You only need to let it idle for 5 secs..

I am actually havin some of the same response issues. I no stranger to flashing, I turned car off after flash for about a minute or two the turned it on and idled for about a minute or two hoping it would learn new parameters and still
Having a few response issues. I'll send you some logs tonight. A couple banging through the gears and a couple steady AFR to WOT 3rd gear pulls (no where to do 4th safely right now). But I do feel a good difference in the tq curve and the rpm is def higher!

[gmookher]

so when are you ready to take my money, and a new batch of orders>?

[Visconti]

Originally Posted by EvoXDD

I am actually havin some of the same response issues. I no stranger to flashing, I turned car off after flash for about a minute or two the turned it on and idled for about a minute or two hoping it would learn new parameters and still
Having a few response issues. I'll send you some logs tonight. A couple banging through the gears and a couple steady AFR to WOT 3rd gear pulls (no where to do 4th safely right now). But I do feel a good difference in the tq curve and the rpm is def higher!

He's actually all set so I would suggest u do the same thing - make sure the cams are turned on

[vubaru]

Originally Posted by EvoXDD

I am actually havin some of the same response issues. I no stranger to flashing, I turned car off after flash for about a minute or two the turned it on and idled for about a minute or two hoping it would learn new parameters and still
Having a few response issues. I'll send you some logs tonight. A couple banging through the gears and a couple steady AFR to WOT 3rd gear pulls (no where to do 4th safely right now). But I do feel a good difference in the tq curve and the rpm is def higher!

Keep us posted. It seems like you idled the car properly. How are you checking to see whether the cams are on?

[KamalT]

Originally Posted by GC GTS Aero Kit

Just went for a strap in my Evo 9 on E85 .....ahhh dusted 911 GT2RS Feeling chuffed

Where do you get e85 on the gold coast?