Stock Rear View Camera for Fujitsu Ten?

[Foobar]

EDIT: any NTSC Camera will work with our headunit - pins 8 and 16 on the 16 pin harness take the video +/- signal. So long as the camera has power when the head unit starts up, it'll recognize it.

[OrbitalEllipses]

[Foobar]

Originally Posted by OrbitalEllipses

I actually did search. Only thread I found was someone trying to sell their own custom deal and it referred to a vendor post that no longer exists and a couple of the comments saying how unreasonably priced it was. But thanks, I'll try a few more permutations on the search and see what I can find out.

[rmjjensen]

I've also been trying to find this. The connectors there but there's only one wire coming out of the harness (gray for the e-brake wire). I've been contemplating adding the correct pins the harness - if you find anything please post back.

Thanks

[sparks]

As a Subaru Parts Manger and retired Navy Electronics Technician, I'll add this:

The rear camera is available for the 2012/2013 Forester and Impreza.
The Forester does have a seperate rear cord for the camera that I can order.
There are several patch connectors available for the Forester and Impreza that are used when the nav is installed (I have all 3 on order).
The camera connection comes in the radio on Connector B a 16 pin plug, and the plug for the BRZ only has 1 wire (hand brake).
The rear camera kit for the Forester lists for $160.00

The hard parts:

Pins for the existing radio plug or get lucky with one of the patch cables.
Buy and mount the camera
Running 4 wires
Determine what tells the radio to switch to back up mode, or will it be automatic when it see's the camera is connected.

I too saw the vendor thread, I also think the pricing is WAY to high for a camera 2 plugs, and a legnth of 4 wires.

[Lee358]

Originally Posted by sparks

As a Subaru Parts Manger and retired Navy Electronics Technician, I'll add this:

The rear camera is available for the 2012/2013 Forester and Impreza.
The Forester does have a seperate rear cord for the camera that I can order.
There are several patch connectors available for the Forester and Impreza that are used when the nav is installed (I have all 3 on order).
The camera connection comes in the radio on Connector B a 16 pin plug, and the plug for the BRZ only has 1 wire (hand brake).
The rear camera kit for the Forester lists for $160.00

The hard parts:

Pins for the existing radio plug or get lucky with one of the patch cables.
Buy and mount the camera
Running 4 wires
Determine what tells the radio to switch to back up mode, or will it be automatic when it see's the camera is connected.

I too saw the vendor thread, I also think the pricing is WAY to high for a camera 2 plugs, and a legnth of 4 wires.

Please keep us updated!! Thank you very much!


Sent from my iPhone using Tapatalk

[xjohnx]

Originally Posted by sparks

As a Subaru Parts Manger and retired Navy Electronics Technician, I'll add this:

The rear camera is available for the 2012/2013 Forester and Impreza.
The Forester does have a seperate rear cord for the camera that I can order.
There are several patch connectors available for the Forester and Impreza that are used when the nav is installed (I have all 3 on order).
The camera connection comes in the radio on Connector B a 16 pin plug, and the plug for the BRZ only has 1 wire (hand brake).
The rear camera kit for the Forester lists for $160.00

The hard parts:

Pins for the existing radio plug or get lucky with one of the patch cables.
Buy and mount the camera
Running 4 wires
Determine what tells the radio to switch to back up mode, or will it be automatic when it see's the camera is connected.

I too saw the vendor thread, I also think the pricing is WAY to high for a camera 2 plugs, and a legnth of 4 wires.

Can't wait to see your results!

[Foobar]

Originally Posted by sparks

As a Subaru Parts Manger and retired Navy Electronics Technician, I'll add this:

The rear camera is available for the 2012/2013 Forester and Impreza.
The Forester does have a seperate rear cord for the camera that I can order.
There are several patch connectors available for the Forester and Impreza that are used when the nav is installed (I have all 3 on order).
The camera connection comes in the radio on Connector B a 16 pin plug, and the plug for the BRZ only has 1 wire (hand brake).
The rear camera kit for the Forester lists for $160.00

The hard parts:

Pins for the existing radio plug or get lucky with one of the patch cables.
Buy and mount the camera
Running 4 wires
Determine what tells the radio to switch to back up mode, or will it be automatic when it see's the camera is connected.

I too saw the vendor thread, I also think the pricing is WAY to high for a camera 2 plugs, and a legnth of 4 wires.

Sparks, are you experimenting with this? I'll probably get the parts and start playing around with this as well, but if you've already made some headway, I'd hate to reinvent the wheel (and possibly make the same mistakes).

[sparks]

Yes the first patch cable arrived today and it's an antenna cable, no luck. The other two will be here Monday.

[dwx]

I did receive an email from SVXdc who makes the cables for the Imprezas/Foresters. He said he could supply a harness with the RCA plug and the pins to install into the factory 16-pin connector. Basically just put the pins in the right place on the connector, pretty easy. I don't know if that comes with the power cable to power the OEM camera, I'm assuming it does. I may not end up using the OEM camera to begin with just to make sure everything works okay.

He has made these for the Fujitsu Ten units in the 2012 Forester/Impreza.

[sparks]

The remainng cables came in, both are antenna related.

Looks like I need to contact SVXdc for some contacts

[sparks]

So it looks to be get this - http://www.ebay.com/itm/US-Store-Wid...item416708d70c

Then talk to SVXdc about an rca to two pins for the 16 pin plug.

[illmatic]

Thanks for doing the research guys. A link to his website.
http://ae64.com/

[sparks]

One way or another I am going to make this work

After a little more research, the head unit puts out 6V to turn on the camera, not needed.
The head unit does get a reverse input.
The back up lights can be tapped to power the 12V camera.

All we need now is pins to RCA and a DIY

[Flat Black VW]

haven't gotten a chance to check this yet, but it seems like it may be helpful to some of you guys.


Ive had SVXdc's pins sitting in my glove box for a couple months now as I have not gotten around to trying it. Hopefully you guys can figure it out and make it easier for everyone else.

this may be useful too:

[Nitemare]

u need something like

Amazon.com: ECLIPSE UC100 UNIVERSAL REAR-VIEW CAMERA PLUG FOR AVN RECEIVERS DVD TV SCREEN: Car Electronics

Amazon.com: ECLIPSE UC100 UNIVERSAL REAR-VIEW CAMERA PLUG FOR AVN RECEIVERS DVD TV SCREEN: Car Electronics

[Foobar]

Originally Posted by Nitemare

u need something like Amazon.com: ECLIPSE UC100 UNIVERSAL REAR-VIEW CAMERA PLUG FOR AVN RECEIVERS DVD TV SCREEN: Car Electronics

Yep - does anyone know of a part with the 16-pin adapter that our head unit uses?

SVXdc, do you sell them? Would love to purchase one off of you if so.

I ordered that $17 license plate CMOS camera since it was so cheap and gives a nice mounting solution (available on Amazon prime for $14 and change.) If I don't find a proper adapter by this weekend, I'm just gonna go Frankenstein on the stock wiring and hope for the best.

[sparks]

http://www.ebay.com/itm/230795268327...84.m1439.l2649

I went with this camera kit. The camera measures 25X22X25mm. There is a flat area under the rear trunk logo that is 35X75mm. Should be a pefect fit and located dead center. For 12.35, WTH!

SVXdc - We need your help on pins to RCA

[Flat Black VW]

I got mine working. Pins match from the diagram in my previous post. Right now I'm working on power and putting everything back together. I will post pics when I get home tonight.

[Flat Black VW]

http://www.ft86club.com/forums/showt...896#post393896

solution^^^

[sparks]

Originally Posted by Flat Black VW

http://www.ft86club.com/forums/showt...896#post393896

solution^^^

Great job!

Talking with Mr. SVXdc the pins used aren't the same, they work, kind of.

For me, next is pull the head unit try removing the pin for the brake input. Then match it up to our Subaru terminal kit or possibly radio shack. I want this to be a plug and play, with pins that snap in, not forced.

[Foobar]

Originally Posted by sparks

http://www.ebay.com/itm/230795268327...84.m1439.l2649

I went with this camera kit. The camera measures 25X22X25mm. There is a flat area under the rear trunk logo that is 35X75mm. Should be a pefect fit and located dead center. For 12.35, WTH!

SVXdc - We need your help on pins to RCA

Sparks - that area for me has the trunk release button. Do you have a Premium? This is why I was leaning towards the license plate camera as the Limited is using that space for the trunk release. I thought both models had that.