STI Push Button Start - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

notFRS · 07-27-2012, 01:18 AM

Quote:

Originally Posted by thermobox

Yep. Got both the right and wrong ones from J-Parts. They have always been very easy to work with as far as ordering. But like my mistake, make sure that you only order the right part because they will not take returns.

More than a few people have been burned by this so far... I ran into the same mistake with them as well, BEFORE they updated their site with any information or clarification.

Make sure you know exactly what you're ordering when you put an order through them.

Looks fantastic once installed.

notFRS · 08-03-2012, 03:59 AM

OEM+ goodness.

schtebie · 08-03-2012, 07:28 AM

Quote:

Originally Posted by notFRS

OEM+ goodness.

Out of curiosity, how long did it take to install and how difficult was it?

thermobox · 08-03-2012, 08:57 AM

5 minutes. Very easy if you are "hands on". You will need to mask off between the panel and the shifter with painters tape to avoid scratching the area in front of the panel when it comes out. I pushed the tape as square against the panel as I could.

Then it is a double motion. You will grab inside the pocket of the panel, pull out-down then pull out-up. The panel comes out and you just swippy swappy the starter and harness.

Lee358 · 08-03-2012, 09:13 AM

Part number??

Sent from my iPhone using Tapatalk

thermobox · 08-03-2012, 09:43 AM

ST83031ST020

Lee358 · 08-03-2012, 10:21 AM

Quote:

Originally Posted by thermobox

ST83031ST020

And thats plug and play??

Sent from my iPhone using Tapatalk

thermobox · 08-03-2012, 11:53 AM

Yep, it's plug and play. I've got both boxes here. So I know the part numbers very well.

If you order from J-parts make sure in the drop-down that you choose the BRZ part and not the GR part.

bullitt@uamotorsports · 08-03-2012, 02:12 PM

This only works for the BRZ limited (in the US) correct?

illmatic · 08-03-2012, 02:22 PM

Quote:

Originally Posted by bullitt@uamotorsports

This only works for the BRZ limited (in the US) correct?

Yes

Blake · 08-03-2012, 02:22 PM

Is the Scion FR-S compatible to have a push start button?? I would like to buy one but I am not sure if it's even possible???

bullitt@uamotorsports · 08-03-2012, 02:31 PM

I dont believe so since you would need the Keyless entry system which currently is only available on the limited version of the BRZ in the states. however available on the GT86 in other parts of the world.

thermobox · 08-03-2012, 02:42 PM

Quote:

Originally Posted by bullitt@uamotorsports

This only works for the BRZ limited (in the US) correct?

That I don't know for sure and can't confirm. Due to cost savings measures I would assume this works for every push button ZN/ZC out there in the world.

But I can only confirm that said part number will fit the USDM BRZ.

thermobox · 08-03-2012, 02:46 PM

Quote:

Originally Posted by Blake

Is the Scion FR-S compatible to have a push start button?? I would like to buy one but I am not sure if it's even possible???

Doubtful. To make this work on the FR-S would require you to get pretty custom with your wiring. It would almost make more sense to go with an aftermarket push-button starter due to cost.

If you were to go OE it would require:
New ignition switches/relays
Push Button Starter w/ Panel
All associated harnesses and wiring

08-03-2012, 02:12 PM	#37
bullitt@uamotorsports Member Join Date: Jul 2012 Drives: 1500hp 450zTT Location: ATL Posts: 32 Thanks: 0 Thanked 5 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	This only works for the BRZ limited (in the US) correct? __________________

08-03-2012, 02:31 PM	#40
bullitt@uamotorsports Member Join Date: Jul 2012 Drives: 1500hp 450zTT Location: ATL Posts: 32 Thanks: 0 Thanked 5 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I dont believe so since you would need the Keyless entry system which currently is only available on the limited version of the BRZ in the states. however available on the GT86 in other parts of the world. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Push button start	Symbiont	Cosmetic Modification (Interior/Exterior/Lighting)	5	06-17-2012 01:45 PM
push button start standard?	sparrowhawk	BRZ First-Gen (2012+) -- General Topics	2	03-04-2012 03:52 PM
Push button start general question	maxeveland	Other Vehicles & General Automotive Discussions	9	02-14-2012 10:13 AM
No push button start a good thing?	Syldrin	Scion FR-S / Toyota 86 GT86 General Forum	131	12-13-2011 07:06 PM

08-03-2012, 03:59 AM	#30
notFRS Senior Member Join Date: Jun 2012 Drives: BRZ Sport-tech Location: Prince George Posts: 138 Thanks: 65 Thanked 39 Times in 15 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	OEM+ goodness.

08-03-2012, 08:57 AM	#32
thermobox Senior Member Join Date: Feb 2012 Drives: 16 Impreza 5dr CWP Location: Baltimore, Md Posts: 332 Thanks: 5 Thanked 94 Times in 61 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	5 minutes. Very easy if you are "hands on". You will need to mask off between the panel and the shifter with painters tape to avoid scratching the area in front of the panel when it comes out. I pushed the tape as square against the panel as I could. Then it is a double motion. You will grab inside the pocket of the panel, pull out-down then pull out-up. The panel comes out and you just swippy swappy the starter and harness.

08-03-2012, 09:13 AM	#33
Lee358 Senior Member Join Date: Jun 2012 Drives: nissan frontier, DGM MT BRZ Location: North nj Posts: 1,576 Thanks: 404 Thanked 418 Times in 254 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Part number?? Sent from my iPhone using Tapatalk

08-03-2012, 09:43 AM	#34
thermobox Senior Member Join Date: Feb 2012 Drives: 16 Impreza 5dr CWP Location: Baltimore, Md Posts: 332 Thanks: 5 Thanked 94 Times in 61 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	ST83031ST020

08-03-2012, 11:53 AM	#36
thermobox Senior Member Join Date: Feb 2012 Drives: 16 Impreza 5dr CWP Location: Baltimore, Md Posts: 332 Thanks: 5 Thanked 94 Times in 61 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Yep, it's plug and play. I've got both boxes here. So I know the part numbers very well. If you order from J-parts make sure in the drop-down that you choose the BRZ part and not the GR part.

08-03-2012, 02:22 PM	#39
Blake Member Join Date: Aug 2012 Drives: Ravin Scion FR-S Location: Houston, Texas Posts: 87 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is the Scion FR-S compatible to have a push start button?? I would like to buy one but I am not sure if it's even possible???

User Name		Remember Me?
Password