Work Emotion CR Ultimate BRZ ad - Scion FR-S Forum | Subaru BRZ Forum | Toyota 86 GT 86 Forum | AS1 Forum

Hanzo · 05-31-2012, 09:31 AM

merlin2111 · 05-31-2012, 05:54 PM

Very nice wheels.

Snoopyalien24 · 06-01-2012, 12:36 PM

Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern

just... semi-concave

harajukukei · 07-03-2012, 08:29 PM

Quote:

Originally Posted by Snoopyalien24

Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern

just... semi-concave

SARD makes a pcd converter if you absolutely must have 114.3
http://www.sard.co.jp/after/products...k/PCD/PCD.html

Snoopyalien24 · 07-03-2012, 08:43 PM

Quote:

Originally Posted by harajukukei

SARD makes a pcd converter if you absolutely must have 114.3
http://www.sard.co.jp/after/products...k/PCD/PCD.html

But you have to do too much

From @vividracing

Quote:

The problem used to be the front hubs did not fit the 5x114.3 coil overs. So it would mean you needed to find a set or redrilled STi hubs.

You would need:
5x114.3 Hubs (new seals and bearings if used)
5x114.3 Brakes (brake lines, Calipers, Brackets, Rotors)
5x114.3 Axles (ends would be different but not sure on the r200)
5x114.3 Wheels
5x114.3 Coil overs (mount point to hub)

What I recommend is for everyone to hang tight. The wheel companies are playing catch up. Once they do the same wheels in 5x114.3 will be here for the 5x100. The nice part of 5x114.3 is the easier bear change, longer service life and wide wheels. Wide wheels are not going to matter much as there is only so much room for them. And your not making enough power to spin them. Remember light wheels for light power.

But this is pretty good

http://www.ft86club.com/forums/showthread.php?t=9330

JDMSushi · 07-04-2012, 09:35 AM

Few more to add

Vino · 07-04-2012, 09:55 AM

Nice

Circuit Motorsports · 07-04-2012, 10:40 AM

Those look good, a little more concave would be nice though.

Kenno · 07-04-2012, 11:13 AM

You can get the deep concave in 5x100 from WORK, it's a custom job.

Quote:

Originally Posted by Snoopyalien24

Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern

just... semi-concave

Snoopyalien24 · 07-04-2012, 11:25 AM

Quote:

Originally Posted by Kenno

You can get the deep concave in 5x100 from WORK, it's a custom job.

Any idea how much a wheel for that custom 5X100 concave action?

harajukukei · 07-05-2012, 11:25 AM

anybody know the wheel sizes and offsets for the chargespeed car? the fitment is absolutely perfect.

harajukukei · 07-05-2012, 11:29 AM

Turbowned · 07-05-2012, 01:15 PM

Quote:

Originally Posted by Snoopyalien24

Guess I'll be sending money to Chargespeed once I get a BRZ!

Khyron686 · 07-16-2012, 02:37 PM

I emailed Work about weight of the 17x7 wheel, thinking it would be pretty light.

Answer: Emotion CR Ultimate 17x7.0 would come in around 18.48lbs.

That makes no sense according to the wheel weight chart - 18 lbs is the same as a Rota Torque which is like half the price.

Why is it like pulling teeth to get accurate weights?

Khyron686 · 07-16-2012, 07:24 PM

Quote:

Originally Posted by Khyron686

I emailed Work about weight of the 17x7 wheel, thinking it would be pretty light.

Answer: Emotion CR Ultimate 17x7.0 would come in around 18.48lbs.

That makes no sense according to the wheel weight chart - 18 lbs is the same as a Rota Torque which is like half the price.

Why is it like pulling teeth to get accurate weights?

Further email information:

Thank you for your response.

Emotion CR Ultimate is flow formed "CAST" construction. Currently we don't produce 1 piece Forged Emotion at all.

Have a nice day.

So these wheels are NOT light at all, contrary to the wheel weight listings.

giraffee · 07-18-2012, 12:59 AM

Quote:

Originally Posted by harajukukei

anybody know the wheel sizes and offsets for the chargespeed car? the fitment is absolutely perfect.

18x8.5 +38 with 225/40 tires
18x9.5 +38 with 245/35 tires

Front with semi concave face
Rear with full concave face

If you click his link, you'll see it :P

05-31-2012, 09:31 AM	#1
Hanzo Senior Member Join Date: Dec 2011 Drives: Honda Fit Location: VA Posts: 959 Thanks: 179 Thanked 632 Times in 191 Posts Mentioned: 7 Post(s) Tagged: 11 Thread(s)	Work Emotion CR Ultimate BRZ ad __________________

06-01-2012, 12:36 PM	#3
Snoopyalien24 Mr. Sarcasm Join Date: Sep 2011 Drives: 1996 Coro's Rolla Location: South Florida Posts: 3,619 Thanks: 1,177 Thanked 665 Times in 441 Posts Mentioned: 25 Post(s) Tagged: 4 Thread(s)	Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern just... semi-concave __________________ Get your very own FT86CLUB T-shirts/keychains/goodies! CLICK HERE New site

07-04-2012, 10:40 AM	#8
Circuit Motorsports FT86Club Official Vendor Join Date: Jan 2012 Drives: 2005 Subaru STi Location: Orlando, FL Posts: 1,144 Thanks: 14 Thanked 72 Times in 44 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Those look good, a little more concave would be nice though. __________________ Official BRZ/FR-S Website - www.brz-parts.com CMS Website - www.circuitmotorsports.net Email - sales@circuitmotorsports.net Phone - 407-325-2176 Address: 2931 Forsyth Rd Unit #102, Winter Park, Florida 32792

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Emotion Kiwami - 18x9.5 on Subaru BRZ	RavSpec	Wheels \| Tires \| Spacers \| Hub	156	04-22-2013 10:51 PM
Work CR Kiwami/Ultimate	danscar	Wheels \| Tires \| Spacers \| Hub	34	09-10-2012 11:24 PM
WORK Emotion Kiwami - 18x8.5/9.5. Staggered For FRS/BRZ * Available Now *	RavSpec	Wheels and Tires	59	07-24-2012 11:07 AM
Testing WORK Emotion XD9 - 18x9 / 18x10 on FRS .... Some pics	RavSpec	Wheels \| Tires \| Spacers \| Hub	101	06-07-2012 03:42 PM
WORK Emotion CR Ultimate Matte Black (MBL) Finish	Hanzo	Photos, Videos, Wallpapers, Gallery Forum	26	06-05-2012 12:43 PM

07-04-2012, 09:35 AM	#6
JDMSushi Senior Member Join Date: Jul 2012 Drives: JDM86 Location: Sydney Posts: 216 Thanks: 78 Thanked 48 Times in 29 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Few more to add

07-04-2012, 09:55 AM	#7
Vino 3stars & a sun Join Date: May 2012 Drives: FRS Location: Cali Posts: 138 Thanks: 14 Thanked 21 Times in 19 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Nice

07-05-2012, 11:25 AM	#11
harajukukei Member Join Date: Jan 2011 Drives: MB c230k Location: Boston Posts: 80 Thanks: 9 Thanked 55 Times in 21 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	anybody know the wheel sizes and offsets for the chargespeed car? the fitment is absolutely perfect.

07-05-2012, 11:29 AM	#12
harajukukei Member Join Date: Jan 2011 Drives: MB c230k Location: Boston Posts: 80 Thanks: 9 Thanked 55 Times in 21 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)

07-16-2012, 02:37 PM	#14
Khyron686 Senior Member Join Date: Dec 2011 Drives: 2010 V6 Santa Fe, 2013 FR-S Blue Location: Calgary, Canada Posts: 499 Thanks: 78 Thanked 112 Times in 65 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I emailed Work about weight of the 17x7 wheel, thinking it would be pretty light. Answer: Emotion CR Ultimate 17x7.0 would come in around 18.48lbs. That makes no sense according to the wheel weight chart - 18 lbs is the same as a Rota Torque which is like half the price. Why is it like pulling teeth to get accurate weights?

User Name		Remember Me?
Password