Work Emotion CR Ultimate BRZ ad

[Hanzo]

[merlin2111]

Very nice wheels.

[Snoopyalien24]

Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern


just... semi-concave

[harajukukei]

Originally Posted by Snoopyalien24

Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern


just... semi-concave

SARD makes a pcd converter if you absolutely must have 114.3
http://www.sard.co.jp/after/products...k/PCD/PCD.html

[Snoopyalien24]

Originally Posted by harajukukei

SARD makes a pcd converter if you absolutely must have 114.3
http://www.sard.co.jp/after/products...k/PCD/PCD.html

But you have to do too much

From @vividracing

The problem used to be the front hubs did not fit the 5x114.3 coil overs. So it would mean you needed to find a set or redrilled STi hubs.

You would need:
5x114.3 Hubs (new seals and bearings if used)
5x114.3 Brakes (brake lines, Calipers, Brackets, Rotors)
5x114.3 Axles (ends would be different but not sure on the r200)
5x114.3 Wheels
5x114.3 Coil overs (mount point to hub)

What I recommend is for everyone to hang tight. The wheel companies are playing catch up. Once they do the same wheels in 5x114.3 will be here for the 5x100. The nice part of 5x114.3 is the easier bear change, longer service life and wide wheels. Wide wheels are not going to matter much as there is only so much room for them. And your not making enough power to spin them. Remember light wheels for light power.

But this is pretty good





http://www.ft86club.com/forums/showthread.php?t=9330

[JDMSushi]

Few more to add

[Vino]

Nice

[Circuit Motorsports]

Those look good, a little more concave would be nice though.

[Kenno]

You can get the deep concave in 5x100 from WORK, it's a custom job.

Originally Posted by Snoopyalien24

Bery nice... too bad you can't have any aggressive concave wheels due to the stupid bolt pattern


just... semi-concave

[Snoopyalien24]

Originally Posted by Kenno

You can get the deep concave in 5x100 from WORK, it's a custom job.

Any idea how much a wheel for that custom 5X100 concave action?

[harajukukei]

anybody know the wheel sizes and offsets for the chargespeed car? the fitment is absolutely perfect.

[harajukukei]

[Turbowned]

Originally Posted by Snoopyalien24

Guess I'll be sending money to Chargespeed once I get a BRZ!

[Khyron686]

I emailed Work about weight of the 17x7 wheel, thinking it would be pretty light.

Answer: Emotion CR Ultimate 17x7.0 would come in around 18.48lbs.

That makes no sense according to the wheel weight chart - 18 lbs is the same as a Rota Torque which is like half the price.

Why is it like pulling teeth to get accurate weights?

[Khyron686]

Originally Posted by Khyron686

I emailed Work about weight of the 17x7 wheel, thinking it would be pretty light.

Answer: Emotion CR Ultimate 17x7.0 would come in around 18.48lbs.

That makes no sense according to the wheel weight chart - 18 lbs is the same as a Rota Torque which is like half the price.

Why is it like pulling teeth to get accurate weights?

Further email information:


Thank you for your response.

Emotion CR Ultimate is flow formed "CAST" construction. Currently we don't produce 1 piece Forged Emotion at all.

Have a nice day.


So these wheels are NOT light at all, contrary to the wheel weight listings.

[giraffee]

Originally Posted by harajukukei

anybody know the wheel sizes and offsets for the chargespeed car? the fitment is absolutely perfect.

18x8.5 +38 with 225/40 tires
18x9.5 +38 with 245/35 tires

Front with semi concave face
Rear with full concave face

If you click his link, you'll see it :P